STG(4) BSD Kernel Interfaces Manual STG(4)NAME
stg — driver for Future Domain based SCSI controllers
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device scbus
device stg
For one or more ISA cards:
device isa
In /boot/device.hints:
hint.stg.0.at="isa"
For one or more PCI cards:
device pci
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
stg_load="YES"
DESCRIPTION
The stg driver provides support for ISA, PCCARD and PCI controllers based
on Future Domain SCSI controller chips including the TMC-16C30, 16C50 and
32C60.
HARDWARE
Controllers supported by the stg driver include:
· Adaptec 2920/A
· Future Domain SCSI2GO
· Future Domain TMC-18XX/3260
· IBM SCSI PCMCIA Card
· ICM PSC-2401 SCSI
· MELCO IFC-SC
· RATOC REX-5536, REX-5536AM, REX-5536M, REX-9836A
Note that the Adaptec 2920C is supported by the ahc(4) driver.
SEE ALSOahc(4), cd(4), ch(4), da(4), intro(4), sa(4), scsi(4)HISTORY
The stg device driver has been developed for NetBSD/pc98 and ported for
FreeBSD. It first appeared in FreeBSD 2.2 with PAO and merged in
FreeBSD 4.2.
AUTHORS
The stg driver was written by Naofumi HONDA.
BSD August 8, 2004 BSD