XCWCP(1)XCWCP(1)NAME
xcwcp - X Window-based Morse tutor program
SYNOPSIS
xcwcp [-s --system=SYSTEM] [-d --device=DEVICE] [-w --wpm=WPM]
[-t --tone=HZ] [-v --volume=PERCENT] [-g --gap=GAP] [-f, --infile=FILE]
[-F, --outifile=FILE] [-h --help] [-V --version]
xcwcp installed on GNU/Linux systems understands both short form and
long form command line options. xcwcp installed on other operating
systems may understand only the short form options.
There are no mandatory options.
Options may be predefined in the environment variable XCWCP_OPTIONS.
If defined, these options are used first; command line options take
precedence.
DESCRIPTION
xcwcp is a X Window-based interactive Morse code tutor program. It
lets you choose from a number of options for practice, including send‐
ing random characters, random words, and characters from the keyboard.
It will also receive Morse code that you send using the keyboard or
mouse as a Morse keyer, and display the characters it sees.
COMMAND LINE OPTIONS
xcwcp understands the following command line options. The long form
options may not be available in non-LINUX versions.
-s, --system=SYSTEM
Specifies the way that xcwcp generates tones. Valid values are:
console for tones through the console speaker, alsa for tones
generated through the system sound card using ALSA sound system,
oss for tones generated through system sound card using OSS
sound system, soundcard for tones generated through the system
sound card, but without explicit selection of sound system.
These values can be shortened to 'c', 'a', 'o', or 's', respec‐
tively. The default value is 'oss'.
-d, --device=DEVICE
Specifies the device file to open for generating a sound. xcwcp
will use default device if none is specified. The default
devices are: /dev/console for sound produced through console,
default for ALSA sound system, /dev/audio for OSS sound system.
See also NOTES ON USING A SOUND CARD below.
-w, --wpm=WPM
Sets the initial sending speed in words per minute. The value
must be between 4 and 60. The default value is 12 WPM.
-t, --tone=HZ
Sets the initial sounder pitch in Hz. This value must be
between 0 and 4,000. A value of 0 selects silent operation, and
can be used for timing checks or other testing. The default
value is 800Hz,
-v, --volume=PERCENT
Sets the initial sending volume, as a percentage of full scale
volume. The value must be between 0 and 100. The default value
is 70 %. Sound volumes work fully for sound card tones, but
xcwcp cannot control the volume of tones from the console
speaker. In this case, a volume of zero is silent, and all
other volume values are simply sounded.
-g, --gap=GAP
Sets the initial extra gap, in dot lengths, between characters
(the 'Farnsworth' delay). It must be between 0 and 60. The
default is 0.
-f, --infile=FILE
Specifies a text file that xcwcp can read to configure its prac‐
tice text. See CREATING CONFIGURATION FILES below.
-F, --outfile=FILE
Specifies a text file to which xcwcp should write its current
practice text.
USER INTERFACE
xcwcp offers GUI controls for changing the speed, tone frequency,
'Farnsworth' gap, and mode of the program. All of the major controls
are placed on the application toolbar.
The main GUI window is used to display the characters that xcwcp sends
or receives.
To find out more about what a particular GUI control does, use the
"What's this..." icon (the '?' at the far right of the toolbar).
RANDOM CHARACTERS AND WORDS
xcwcp sends random characters in groups of five, with a space between
each group.
When sending random words, xcwcp sends the complete word, followed by a
space. Because short words are easier to copy without writing, xcwcp's
default dictionary contains only three, four, and five-letter words in
its random words list.
xcwcp chooses at random from a list of around 3000 words in its default
dictionary. You can change this text using a configuration file, read
at startup. See CREATING CONFIGURATION FILES below.
RECEIVING MORSE
xcwcp can receive Morse code, and display it in its main GUI window.
To key Morse code into the program, select the Receive Keyed CW mode,
and press the stop/start button. Now, place the mouse cursor over the
central window of the program. By pressing the middle mouse button,
you should be able to key Morse into the program as if the mouse button
was a straight Morse key.
For better keying, you can use the left and right mouse buttons as if
they were paddles on an Iambic keyer. This will send Morse code at the
exact rate set on the Speed control.
You can also use the keyboard for keying. In this case, any of the Up
or Down cursor keys, Space, Enter, or Return may be used as the
straight key, and the Left and Right cursor keys act as the two paddles
of an Iambic keyer.
By default, xcwcp will try to follow the speed of the Morse code that
you send to it. It is possible to switch this tracking off, in which
case the program switches to receiving only at the exact speed set on
the Speed control. However, fixed speed receiving is very, very picky
about receiving only extremely accurately timed Morse code, so unless
you are striving for complete perfection, you may find that speed
tracking is more comfortable.
The speed tracking in xcwcp can sometime be confused by very wide and
abrupt changes in speed. If it is having difficulty finding the speed
you are sending at, you can use the File pulldown menu to synchronize
the receive speed to the speed set on the Speed control.
At any time, the mode selection combowidget can get focus by using
Alt+M. You can then use the space bar or the up/down keys to change
the mode. The Tab key moves to the next widget, so you can change
speed, etc. Shift+Tab moves backwards.
NOTES ON USING A SOUND CARD
By default, xcwcp tries to open OSS device "/dev/audio" to access the
system sound card. This is generally the correct device to use, but
for systems with special requirements, or those with multiple sound
cards, the option -d or --device, combined with -s or --system can be
used to specify the device and audio system for sound card access. If
the sound card device cannot be set up, xcwcp prints the error message
cannot set up soundcard sound
and exits.
Sound card devices, when opened through OSS sound system, are usually
single-access devices, so that when one process has opened the device,
other processes are prevented from using it. In such cases xcwcp will
of course conflict with any other programs that expect exclusive use of
the system sound card (for example, MP3 players). If xcwcp finds that
the sound card is already busy, it prints the error message
open /dev/audio: Device or resource busy
and exits.
The sound card device is not used if xcwcp is only sending tones on the
console speaker.
AUDIO OUTPUT - DEFAULTS AND SELECTION
xcwcp first tries to access sound card using PulseAudio sound system,
using default device name, unless user specifies other audio device
with option -d or --device.
xcwcp then tries to access sound card using OSS audio system and
default OSS audio device name ('/dev/audio'), unless user specifies
other audio device with option -d or --device.
If opening soundcard through OSS fails, xcwcp tries to access the sound
card using ALSA audio system, and default ALSA audio device name
('default'), unless user specifies other audio device with option -d or
--device.
If opening soundcard through ALSA also fails, xcwcp tries to access
system console buzzer using default buzzer device '/dev/console',
unless user specifies other audio device with option -d or --device.
It is very common that in order to access the console buzzer device
user has to have root privileges. For that reason trying to open con‐
sole buzzer almost always fails. This is not a program's bug, this is
a result of operating system's restrictions. Making xcwcp an suid
binary bypasses this restriction. The program does not fork() or
exec(), so making it suid should be relatively safe. Note however that
this practice is discouraged for security reasons.
As stated, user can tell xcwcp which device to use, using -d or
--device option. Which device files are suitable will depend on which
operating system is running, which system user ID runs xcwcp, and which
user groups user belongs to.
CREATING CONFIGURATION FILES
xcwcp contains a default set of modes and practice text that should be
enough to begin with. It can however read in a file at startup that
reconfigures these to provide different character groupings, word sets,
and other practice data.
To read a configuration file, use the -i or --infile command line
option. The file should introduce each xcwcp mode with a section
header in '[' ... ']' characters, followed by the practice text for
that mode, with elements separated by whitespace. Lines starting with
a semicolon or hash are treated as comments. For example
; Simple example mode
[ A to Z ]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
xcwcp will generate five character groups for modes whose elements are
all single characters, and treat other modes as having elements that
are complete words. As a starting point for customized modes, xcwcp
will write its default configuration to a file if given the undocu‐
mented -# option, for example "xcwcp -# /tmp/xcwcp.ini".
NOTES
xcwcp is an X Window rewrite of cwcp. Both programs borrow heavily
from the the DOS Morse code tutor CP222C.EXE, by VU2ZAP.
The characters echoed in the main GUI window may be ASCII equivalents
of Morse procedural signals; see the cw(7,LOCAL) man page for details.
HINTS ON LEARNING MORSE CODE
Here are a few hints and tips that may help with the process of learn‐
ing Morse code.
Firstly, do NOT think of the elements as dots and dashes. Instead,
think of them as dits and dahs (so 'A' is di-dah). If you think of
them in this way, the process of translating sound into characters will
be learned much more easily.
Do not learn the characters from a table. Learn them by watching the
groups appear on the screen, and listening to the sounds produced as
each is sent. In the very initial stages, it may be beneficial if you
can find a person to take you through the first stages of recognising
characters.
Do not waste your time learning Morse code at 5 WPM. Set the speed to
12 or 15 WPM, but use extra spacing (the Gap window) to reduce the
effective speed to much lower - around four or five WPM effective
speed. This way, you will learn the rhythm of the characters as they
are sent, but still have plenty of time between characters. As you
practice, decrease the gap to zero.
Learn in stages. Start by learning the EISH5 group, then progress down
through the menu as each group is mastered. The groups contain charac‐
ters which are in some way related, either by sound, or by type of
character.
Once you have completed all the groups EISH5 to ,?.;)/ (or 23789 if you
do not want to learn procedural signals yet), use the full character
set options, and the words and CW words options, to sharpen your skill.
If you have difficulties with particular characters, return to that
group and practice again with a smaller character set.
Resist the temptation to try to learn or improve your speed by copying
off-air. You will not know what speed you are working at, and much
hand-sent Morse is not perfectly formed. What you can gain off-air
though is a general 'resilience', a tolerance for Morse code where the
timing of individual elements, or spacing between characters and words,
is not 100% accurate.
If working to attain a particular speed for a test, always set the
speed slightly higher. For example, if aiming for 12 WPM, set the
tutor speed to 14 or 15 WPM. This way, when you drop back to 12 WPM
you will feel much more relaxed about copying. Be aware that xcwcp is
not necessarily going to send at exactly the speed you set, due to lim‐
itations in what can be done with UNIX timers. It often sends at a
slower speed than you set, so be very careful with this if you have a
target speed that you need to reach.
Use the program to make cassette tapes that you can take with you in a
walkman or in the car, for long journeys. You do not have to write
down everything you hear to practice Morse code. Simply listening to
the shapes of characters over a period will help to train your brain
into effortless recognition. In fact, slavishly writing everything
down becomes a barrier at speeds of 15-20 WPM and above, so if you can
begin to copy without writing each character down, you will find
progress much easier above these speeds. But do not over-use these
tapes, otherwise you will quickly memorise them. Re-record them with
new contents at very regular intervals.
Try to spend at least 15-30 minutes each day practicing. Much less
than this will make progress glacially slow. But significantly more
than an hour or so may just result in you becoming tired, but not
improving. Recognise when it is time to stop for the day.
Do not worry if you reach a speed 'plateau'. This is common, and you
will soon pass it with a little perseverance.
At higher speeds, CW operators tend to recognise the 'shape' of whole
words, rather than the individual characters within the words. The CW
words menu option can be used to help to practice and develop this
skill.
Neither the mouse buttons nor the keyboard are ideal for use a keys or
keyer paddles, for sending practice. Try to use a proper key for send‐
ing where possible. It is hard even for experienced operators to get
good keying using the mouse or keyboard. Of the two, the mouse is
probably the better option, though, in a pinch.
ERRORS AND OMISSIONS
The calibration option is a bit ropy. It simply sends PARIS repeat‐
edly, and relies on you to time the sending and then work out if any
adjustment to the speed is really necessary. Automatic calibration by
making measurements over a given period would be a lot better.
SEE ALSO
Man pages for cw(7,LOCAL), libcw(3,LOCAL), cw(1,LOCAL), cwgen(1,LOCAL),
and xcwcp(1,LOCAL).
xcwcp ver. 3.5.0 CW Tutor Package XCWCP(1)