CMAKE-BUILDSYSTEM(7) CMake CMAKE-BUILDSYSTEM(7)NAMEcmake-buildsystem - CMake Buildsystem Reference
INTRODUCTION
A CMake-based buildsystem is organized as a set of high-level logical
targets. Each target corresponds to an executable or library, or is a
custom target containing custom commands. Dependencies between the
targets are expressed in the buildsystem to determine the build order
and the rules for regeneration in response to change.
BINARY TARGETS
Executables and libraries are defined using the add_executable() and
add_library() commands. The resulting binary files have appropriate
prefixes, suffixes and extensions for the platform targeted. Dependen‐
cies between binary targets are expressed using the tar‐
get_link_libraries() command:
add_library(archive archive.cpp zip.cpp lzma.cpp)
add_executable(zipapp zipapp.cpp)
target_link_libraries(zipapp archive)
archive is defined as a static library -- an archive containing objects
compiled from archive.cpp, zip.cpp, and lzma.cpp. zipapp is defined as
an executable formed by compiling and linking zipapp.cpp. When linking
the zipapp executable, the archive static library is linked in.
Binary Executables
The add_executable() command defines an executable target:
add_executable(mytool mytool.cpp)
Commands such as add_custom_command(), which generates rules to be run
at build time can transparently use an EXECUTABLE target as a COMMAND
executable. The buildsystem rules will ensure that the executable is
built before attempting to run the command.
Binary Library Types
Normal Libraries
By default, the add_library() command defines a static library, unless
a type is specified. A type may be specified when using the command:
add_library(archive SHARED archive.cpp zip.cpp lzma.cpp)
add_library(archive STATIC archive.cpp zip.cpp lzma.cpp)
The BUILD_SHARED_LIBS variable may be enabled to change the behavior of
add_library() to build shared libraries by default.
In the context of the buildsystem definition as a whole, it is largely
irrelevant whether particular libraries are SHARED or STATIC -- the
commands, dependency specifications and other APIs work similarly
regardless of the library type. The MODULE library type is dissimilar
in that it is generally not linked to -- it is not used in the
right-hand-side of the target_link_libraries() command. It is a type
which is loaded as a plugin using runtime techniques. If the library
does not export any unmanaged symbols (e.g. Windows resource DLL,
C++/CLI DLL), it is required that the library not be a SHARED library
because CMake expects SHARED libraries to export at least one symbol.
add_library(archive MODULE 7z.cpp)
Apple Frameworks
A SHARED library may be marked with the FRAMEWORK target property to
create an OS X Framework:
add_library(MyFramework SHARED MyFramework.cpp)
set_target_properties(MyFramework PROPERTIES
FRAMEWORK 1
FRAMEWORK_VERSION A
)
Object Libraries
The OBJECT library type is also not linked to. It defines a
non-archival collection of object files resulting from compiling the
given source files. The object files collection can be used as source
inputs to other targets:
add_library(archive OBJECT archive.cpp zip.cpp lzma.cpp)
add_library(archiveExtras STATIC $<TARGET_OBJECTS:archive> extras.cpp)
add_executable(test_exe $<TARGET_OBJECTS:archive> test.cpp)
OBJECT libraries may only be used locally as sources in a buildsystem
-- they may not be installed, exported, or used in the right hand side
of target_link_libraries(). They also may not be used as the TARGET in
a use of the add_custom_command(TARGET) command signature.
Although object libraries may not be named directly in calls to the
target_link_libraries() command, they can be "linked" indirectly by
using an Interface Library whose INTERFACE_SOURCES target property is
set to name $<TARGET_OBJECTS:objlib>.
BUILD SPECIFICATION AND USAGE REQUIREMENTS
The target_include_directories(), target_compile_definitions() and tar‐
get_compile_options() commands specify the build specifications and the
usage requirements of binary targets. The commands populate the
INCLUDE_DIRECTORIES, COMPILE_DEFINITIONS and COMPILE_OPTIONS target
properties respectively, and/or the INTERFACE_INCLUDE_DIRECTORIES,
INTERFACE_COMPILE_DEFINITIONS and INTERFACE_COMPILE_OPTIONS target
properties.
Each of the commands has a PRIVATE, PUBLIC and INTERFACE mode. The
PRIVATE mode populates only the non-INTERFACE_ variant of the target
property and the INTERFACE mode populates only the INTERFACE_ variants.
The PUBLIC mode populates both variants of the repective target prop‐
erty. Each command may be invoked with multiple uses of each keyword:
target_compile_definitions(archive
PRIVATE BUILDING_WITH_LZMA
INTERFACE USING_ARCHIVE_LIB
)
Note that usage requirements are not designed as a way to make down‐
streams use particular COMPILE_OPTIONS or COMPILE_DEFINITIONS etc for
convenience only. The contents of the properties must be requirements,
not merely recommendations or convenience.
See the Creating Relocatable Packages section of the cmake-packages(7)
manual for discussion of additional care that must be taken when speci‐
fying usage requirements while creating packages for redistribution.
Target Properties
The contents of the INCLUDE_DIRECTORIES, COMPILE_DEFINITIONS and COM‐
PILE_OPTIONS target properties are used appropriately when compiling
the source files of a binary target.
Entries in the INCLUDE_DIRECTORIES are added to the compile line with
-I or -isystem prefixes and in the order of appearance in the property
value.
Entries in the COMPILE_DEFINITIONS are prefixed with -D or /D and added
to the compile line in an unspecified order. The DEFINE_SYMBOL target
property is also added as a compile definition as a special convenience
case for SHARED and MODULE library targets.
Entries in the COMPILE_OPTIONS are escaped for the shell and added in
the order of appearance in the property value. Several compile options
have special separate handling, such as POSITION_INDEPENDENT_CODE.
The contents of the INTERFACE_INCLUDE_DIRECTORIES, INTERFACE_COM‐
PILE_DEFINITIONS and INTERFACE_COMPILE_OPTIONS target properties are
Usage Requirements -- they specify content which consumers must use to
correctly compile and link with the target they appear on. For any
binary target, the contents of each INTERFACE_ property on each target
specified in a target_link_libraries() command is consumed:
set(srcs archive.cpp zip.cpp)
if (LZMA_FOUND)
list(APPEND srcs lzma.cpp)
endif()
add_library(archive SHARED ${srcs})
if (LZMA_FOUND)
# The archive library sources are compiled with -DBUILDING_WITH_LZMA
target_compile_definitions(archive PRIVATE BUILDING_WITH_LZMA)
endif()
target_compile_definitions(archive INTERFACE USING_ARCHIVE_LIB)
add_executable(consumer)
# Link consumer to archive and consume its usage requirements. The consumer
# executable sources are compiled with -DUSING_ARCHIVE_LIB.
target_link_libraries(consumer archive)
Because it is common to require that the source directory and corre‐
sponding build directory are added to the INCLUDE_DIRECTORIES, the
CMAKE_INCLUDE_CURRENT_DIR variable can be enabled to conveniently add
the corresponding directories to the INCLUDE_DIRECTORIES of all tar‐
gets. The variable CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE can be
enabled to add the corresponding directories to the INTER‐
FACE_INCLUDE_DIRECTORIES of all targets. This makes use of targets in
multiple different directories convenient through use of the tar‐
get_link_libraries() command.
Transitive Usage Requirements
The usage requirements of a target can transitively propagate to depen‐
dents. The target_link_libraries() command has PRIVATE, INTERFACE and
PUBLIC keywords to control the propagation.
add_library(archive archive.cpp)
target_compile_definitions(archive INTERFACE USING_ARCHIVE_LIB)
add_library(serialization serialization.cpp)
target_compile_definitions(serialization INTERFACE USING_SERIALIZATION_LIB)
add_library(archiveExtras extras.cpp)
target_link_libraries(archiveExtras PUBLIC archive)
target_link_libraries(archiveExtras PRIVATE serialization)
# archiveExtras is compiled with -DUSING_ARCHIVE_LIB
# and -DUSING_SERIALIZATION_LIB
add_executable(consumer consumer.cpp)
# consumer is compiled with -DUSING_ARCHIVE_LIB
target_link_libraries(consumer archiveExtras)
Because archive is a PUBLIC dependency of archiveExtras, the usage
requirements of it are propagated to consumer too. Because serializa‐
tion is a PRIVATE dependency of archive, the usage requirements of it
are not propagated to consumer.
Generally, a dependency should be specified in a use of tar‐
get_link_libraries() with the PRIVATE keyword if it is used by only the
implementation of a library, and not in the header files. If a depen‐
dency is additionally used in the header files of a library (e.g. for
class inheritance), then it should be specified as a PUBLIC dependency.
A dependency which is not used by the implementation of a library, but
only by its headers should be specified as an INTERFACE dependency.
The target_link_libraries() command may be invoked with multiple uses
of each keyword:
target_link_libraries(archiveExtras
PUBLIC archive
PRIVATE serialization
)
Usage requirements are propagated by reading the INTERFACE_ variants of
target properties from dependencies and appending the values to the
non-INTERFACE_ variants of the operand. For example, the INTER‐
FACE_INCLUDE_DIRECTORIES of dependencies is read and appended to the
INCLUDE_DIRECTORIES of the operand. In cases where order is relevant
and maintained, and the order resulting from the tar‐
get_link_libraries() calls does not allow correct compilation, use of
an appropriate command to set the property directly may update the
order.
For example, if the linked libraries for a target must be specified in
the order lib1 lib2 lib3 , but the include directories must be speci‐
fied in the order lib3 lib1 lib2:
target_link_libraries(myExe lib1 lib2 lib3)
target_include_directories(myExe
PRIVATE $<TARGET_PROPERTY:lib3,INTERFACE_INCLUDE_DIRECTORIES>)
Note that care must be taken when specifying usage requirements for
targets which will be exported for installation using the
install(EXPORT) command. See Creating Packages for more.
Compatible Interface Properties
Some target properties are required to be compatible between a target
and the interface of each dependency. For example, the POSITION_INDE‐
PENDENT_CODE target property may specify a boolean value of whether a
target should be compiled as position-independent-code, which has plat‐
form-specific consequences. A target may also specify the usage
requirement INTERFACE_POSITION_INDEPENDENT_CODE to communicate that
consumers must be compiled as position-independent-code.
add_executable(exe1 exe1.cpp)
set_property(TARGET exe1 PROPERTY POSITION_INDEPENDENT_CODE ON)
add_library(lib1 SHARED lib1.cpp)
set_property(TARGET lib1 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
add_executable(exe2 exe2.cpp)
target_link_libraries(exe2 lib1)
Here, both exe1 and exe2 will be compiled as position-independent-code.
lib1 will also be compiled as position-independent-code because that is
the default setting for SHARED libraries. If dependencies have con‐
flicting, non-compatible requirements cmake(1) issues a diagnostic:
add_library(lib1 SHARED lib1.cpp)
set_property(TARGET lib1 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
add_library(lib2 SHARED lib2.cpp)
set_property(TARGET lib2 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE OFF)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 lib1)
set_property(TARGET exe1 PROPERTY POSITION_INDEPENDENT_CODE OFF)
add_executable(exe2 exe2.cpp)
target_link_libraries(exe2 lib1 lib2)
The lib1 requirement INTERFACE_POSITION_INDEPENDENT_CODE is not "com‐
patible" with the POSITION_INDEPENDENT_CODE property of the exe1 tar‐
get. The library requires that consumers are built as position-inde‐
pendent-code, while the executable specifies to not built as posi‐
tion-independent-code, so a diagnostic is issued.
The lib1 and lib2 requirements are not "compatible". One of them
requires that consumers are built as position-independent-code, while
the other requires that consumers are not built as position-indepen‐
dent-code. Because exe2 links to both and they are in conflict, a
diagnostic is issued.
To be "compatible", the POSITION_INDEPENDENT_CODE property, if set must
be either the same, in a boolean sense, as the INTERFACE_POSITION_INDE‐
PENDENT_CODE property of all transitively specified dependencies on
which that property is set.
This property of "compatible interface requirement" may be extended to
other properties by specifying the property in the content of the COM‐
PATIBLE_INTERFACE_BOOL target property. Each specified property must
be compatible between the consuming target and the corresponding prop‐
erty with an INTERFACE_ prefix from each dependency:
add_library(lib1Version2 SHARED lib1_v2.cpp)
set_property(TARGET lib1Version2 PROPERTY INTERFACE_CUSTOM_PROP ON)
set_property(TARGET lib1Version2 APPEND PROPERTY
COMPATIBLE_INTERFACE_BOOL CUSTOM_PROP
)
add_library(lib1Version3 SHARED lib1_v3.cpp)
set_property(TARGET lib1Version3 PROPERTY INTERFACE_CUSTOM_PROP OFF)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 lib1Version2) # CUSTOM_PROP will be ON
add_executable(exe2 exe2.cpp)
target_link_libraries(exe2 lib1Version2 lib1Version3) # Diagnostic
Non-boolean properties may also participate in "compatible interface"
computations. Properties specified in the COMPATIBLE_INTERFACE_STRING
property must be either unspecified or compare to the same string among
all transitively specified dependencies. This can be useful to ensure
that multiple incompatible versions of a library are not linked
together through transitive requirements of a target:
add_library(lib1Version2 SHARED lib1_v2.cpp)
set_property(TARGET lib1Version2 PROPERTY INTERFACE_LIB_VERSION 2)
set_property(TARGET lib1Version2 APPEND PROPERTY
COMPATIBLE_INTERFACE_STRING LIB_VERSION
)
add_library(lib1Version3 SHARED lib1_v3.cpp)
set_property(TARGET lib1Version3 PROPERTY INTERFACE_LIB_VERSION 3)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 lib1Version2) # LIB_VERSION will be "2"
add_executable(exe2 exe2.cpp)
target_link_libraries(exe2 lib1Version2 lib1Version3) # Diagnostic
The COMPATIBLE_INTERFACE_NUMBER_MAX target property specifies that con‐
tent will be evaluated numerically and the maximum number among all
specified will be calculated:
add_library(lib1Version2 SHARED lib1_v2.cpp)
set_property(TARGET lib1Version2 PROPERTY INTERFACE_CONTAINER_SIZE_REQUIRED 200)
set_property(TARGET lib1Version2 APPEND PROPERTY
COMPATIBLE_INTERFACE_NUMBER_MAX CONTAINER_SIZE_REQUIRED
)
add_library(lib1Version3 SHARED lib1_v3.cpp)
set_property(TARGET lib1Version2 PROPERTY INTERFACE_CONTAINER_SIZE_REQUIRED 1000)
add_executable(exe1 exe1.cpp)
# CONTAINER_SIZE_REQUIRED will be "200"
target_link_libraries(exe1 lib1Version2)
add_executable(exe2 exe2.cpp)
# CONTAINER_SIZE_REQUIRED will be "1000"
target_link_libraries(exe2 lib1Version2 lib1Version3)
Similarly, the COMPATIBLE_INTERFACE_NUMBER_MIN may be used to calculate
the numeric minimum value for a property from dependencies.
Each calculated "compatible" property value may be read in the consumer
at generate-time using generator expressions.
Note that for each dependee, the set of properties specified in each
compatible interface property must not intersect with the set specified
in any of the other properties.
Property Origin Debugging
Because build specifications can be determined by dependencies, the
lack of locality of code which creates a target and code which is
responsible for setting build specifications may make the code more
difficult to reason about. cmake(1) provides a debugging facility to
print the origin of the contents of properties which may be determined
by dependencies. The properties which can be debugged are listed in
the CMAKE_DEBUG_TARGET_PROPERTIES variable documentation:
set(CMAKE_DEBUG_TARGET_PROPERTIES
INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS
POSITION_INDEPENDENT_CODE
CONTAINER_SIZE_REQUIRED
LIB_VERSION
)
add_executable(exe1 exe1.cpp)
In the case of properties listed in COMPATIBLE_INTERFACE_BOOL or COM‐
PATIBLE_INTERFACE_STRING, the debug output shows which target was
responsible for setting the property, and which other dependencies also
defined the property. In the case of COMPATIBLE_INTERFACE_NUMBER_MAX
and COMPATIBLE_INTERFACE_NUMBER_MIN, the debug output shows the value
of the property from each dependency, and whether the value determines
the new extreme.
Build Specification with Generator Expressions
Build specifications may use generator expressions containing content
which may be conditional or known only at generate-time. For example,
the calculated "compatible" value of a property may be read with the
TARGET_PROPERTY expression:
add_library(lib1Version2 SHARED lib1_v2.cpp)
set_property(TARGET lib1Version2 PROPERTY
INTERFACE_CONTAINER_SIZE_REQUIRED 200)
set_property(TARGET lib1Version2 APPEND PROPERTY
COMPATIBLE_INTERFACE_NUMBER_MAX CONTAINER_SIZE_REQUIRED
)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 lib1Version2)
target_compile_definitions(exe1 PRIVATE
CONTAINER_SIZE=$<TARGET_PROPERTY:CONTAINER_SIZE_REQUIRED>
)
In this case, the exe1 source files will be compiled with -DCON‐
TAINER_SIZE=200.
Configuration determined build specifications may be conveniently set
using the CONFIG generator expression.
target_compile_definitions(exe1 PRIVATE
$<$<CONFIG:Debug>:DEBUG_BUILD>
)
The CONFIG parameter is compared case-insensitively with the configura‐
tion being built. In the presence of IMPORTED targets, the content of
MAP_IMPORTED_CONFIG_DEBUG is also accounted for by this expression.
Some buildsystems generated by cmake(1) have a predetermined build-con‐
figuration set in the CMAKE_BUILD_TYPE variable. The buildsystem for
the IDEs such as Visual Studio and Xcode are generated independent of
the build-configuration, and the actual build configuration is not
known until build-time. Therefore, code such as
string(TOLOWER ${CMAKE_BUILD_TYPE} _type)
if (_type STREQUAL debug)
target_compile_definitions(exe1 PRIVATE DEBUG_BUILD)
endif()
may appear to work for Makefile based and Ninja generators, but is not
portable to IDE generators. Additionally, the IMPORTED configura‐
tion-mappings are not accounted for with code like this, so it should
be avoided.
The unary TARGET_PROPERTY generator expression and the TARGET_POLICY
generator expression are evaluated with the consuming target context.
This means that a usage requirement specification may be evaluated dif‐
ferently based on the consumer:
add_library(lib1 lib1.cpp)
target_compile_definitions(lib1 INTERFACE
$<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,EXECUTABLE>:LIB1_WITH_EXE>
$<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,SHARED_LIBRARY>:LIB1_WITH_SHARED_LIB>
$<$<TARGET_POLICY:CMP0041>:CONSUMER_CMP0041_NEW>
)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 lib1)
cmake_policy(SET CMP0041 NEW)
add_library(shared_lib shared_lib.cpp)
target_link_libraries(shared_lib lib1)
The exe1 executable will be compiled with -DLIB1_WITH_EXE, while the
shared_lib shared library will be compiled with -DLIB1_WITH_SHARED_LIB
and -DCONSUMER_CMP0041_NEW, because policy CMP0041 is NEW at the point
where the shared_lib target is created.
The BUILD_INTERFACE expression wraps requirements which are only used
when consumed from a target in the same buildsystem, or when consumed
from a target exported to the build directory using the export() com‐
mand. The INSTALL_INTERFACE expression wraps requirements which are
only used when consumed from a target which has been installed and
exported with the install(EXPORT) command:
add_library(ClimbingStats climbingstats.cpp)
target_compile_definitions(ClimbingStats INTERFACE
$<BUILD_INTERFACE:ClimbingStats_FROM_BUILD_LOCATION>
$<INSTALL_INTERFACE:ClimbingStats_FROM_INSTALLED_LOCATION>
)
install(TARGETS ClimbingStats EXPORT libExport ${InstallArgs})
install(EXPORT libExport NAMESPACE Upstream::
DESTINATION lib/cmake/ClimbingStats)
export(EXPORT libExport NAMESPACE Upstream::)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 ClimbingStats)
In this case, the exe1 executable will be compiled with -DClimb‐
ingStats_FROM_BUILD_LOCATION. The exporting commands generate IMPORTED
targets with either the INSTALL_INTERFACE or the BUILD_INTERFACE omit‐
ted, and the *_INTERFACE marker stripped away. A separate project con‐
suming the ClimbingStats package would contain:
find_package(ClimbingStats REQUIRED)
add_executable(Downstream main.cpp)
target_link_libraries(Downstream Upstream::ClimbingStats)
Depending on whether the ClimbingStats package was used from the build
location or the install location, the Downstream target would be com‐
piled with either -DClimbingStats_FROM_BUILD_LOCATION or -DClimb‐
ingStats_FROM_INSTALL_LOCATION. For more about packages and exporting
see the cmake-packages(7) manual.
Include Directories and Usage Requirements
Include directories require some special consideration when specified
as usage requirements and when used with generator expressions. The
target_include_directories() command accepts both relative and absolute
include directories:
add_library(lib1 lib1.cpp)
target_include_directories(lib1 PRIVATE
/absolute/path
relative/path
)
Relative paths are interpreted relative to the source directory where
the command appears. Relative paths are not allowed in the INTER‐
FACE_INCLUDE_DIRECTORIES of IMPORTED targets.
In cases where a non-trivial generator expression is used, the
INSTALL_PREFIX expression may be used within the argument of an
INSTALL_INTERFACE expression. It is a replacement marker which expands
to the installation prefix when imported by a consuming project.
Include directories usage requirements commonly differ between the
build-tree and the install-tree. The BUILD_INTERFACE and
INSTALL_INTERFACE generator expressions can be used to describe sepa‐
rate usage requirements based on the usage location. Relative paths
are allowed within the INSTALL_INTERFACE expression and are interpreted
relative to the installation prefix. For example:
add_library(ClimbingStats climbingstats.cpp)
target_include_directories(ClimbingStats INTERFACE
$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}/generated>
$<INSTALL_INTERFACE:/absolute/path>
$<INSTALL_INTERFACE:relative/path>
$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/$<CONFIG>/generated>
)
Two convenience APIs are provided relating to include directories usage
requirements. The CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE variable may
be enabled, with an equivalent effect to:
set_property(TARGET tgt APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
)
for each target affected. The convenience for installed targets is an
INCLUDES DESTINATION component with the install(TARGETS) command:
install(TARGETS foo bar bat EXPORT tgts ${dest_args}
INCLUDES DESTINATION include
)
install(EXPORT tgts ${other_args})
install(FILES ${headers} DESTINATION include)
This is equivalent to appending ${CMAKE_INSTALL_PREFIX}/include to the
INTERFACE_INCLUDE_DIRECTORIES of each of the installed IMPORTED targets
when generated by install(EXPORT).
When the INTERFACE_INCLUDE_DIRECTORIES of an imported target is con‐
sumed, the entries in the property are treated as SYSTEM include direc‐
tories, as if they were listed in the INTERFACE_SYSTEM_INCLUDE_DIRECTO‐
RIES of the dependency. This can result in omission of compiler warn‐
ings for headers found in those directories. This behavior for
Imported Targets may be controlled with the NO_SYSTEM_FROM_IMPORTED
target property.
If a binary target is linked transitively to a Mac OX framework, the
Headers directory of the framework is also treated as a usage require‐
ment. This has the same effect as passing the framework directory as
an include directory.
Link Libraries and Generator Expressions
Like build specifications, link libraries may be specified with genera‐
tor expression conditions. However, as consumption of usage require‐
ments is based on collection from linked dependencies, there is an
additional limitation that the link dependencies must form a "directed
acyclic graph". That is, if linking to a target is dependent on the
value of a target property, that target property may not be dependent
on the linked dependencies:
add_library(lib1 lib1.cpp)
add_library(lib2 lib2.cpp)
target_link_libraries(lib1 PUBLIC
$<$<TARGET_PROPERTY:POSITION_INDEPENDENT_CODE>:lib2>
)
add_library(lib3 lib3.cpp)
set_property(TARGET lib3 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 lib1 lib3)
As the value of the POSITION_INDEPENDENT_CODE property of the exe1 tar‐
get is dependent on the linked libraries (lib3), and the edge of link‐
ing exe1 is determined by the same POSITION_INDEPENDENT_CODE property,
the dependency graph above contains a cycle. cmake(1) issues a diag‐
nostic in this case.
Output Artifacts
The buildsystem targets created by the add_library() and add_exe‐
cutable() commands create rules to create binary outputs. The exact
output location of the binaries can only be determined at generate-time
because it can depend on the build-configuration and the link-language
of linked dependencies etc. TARGET_FILE, TARGET_LINKER_FILE and
related expressions can be used to access the name and location of gen‐
erated binaries. These expressions do not work for OBJECT libraries
however, as there is no single file generated by such libraries which
is relevant to the expressions.
There are three kinds of output artifacts that may be build by targets
as detailed in the following sections. Their classification differs
between DLL platforms and non-DLL platforms. All Windows-based systems
including Cygwin are DLL platforms.
Runtime Output Artifacts
A runtime output artifact of a buildsystem target may be:
· The executable file (e.g. .exe) of an executable target created by
the add_executable() command.
· On DLL platforms: the executable file (e.g. .dll) of a shared library
target created by the add_library() command with the SHARED option.
The RUNTIME_OUTPUT_DIRECTORY and RUNTIME_OUTPUT_NAME target properties
may be used to control runtime output artifact locations and names in
the build tree.
Library Output Artifacts
A library output artifact of a buildsystem target may be:
· The loadable module file (e.g. .dll or .so) of a module library tar‐
get created by the add_library() command with the MODULE option.
· On non-DLL platforms: the shared library file (e.g. .so or .dylib) of
a shared shared library target created by the add_library() command
with the SHARED option.
The LIBRARY_OUTPUT_DIRECTORY and LIBRARY_OUTPUT_NAME target properties
may be used to control library output artifact locations and names in
the build tree.
Archive Output Artifacts
An archive output artifact of a buildsystem target may be:
· The static library file (e.g. .lib or .a) of a static library target
created by the add_library() command with the STATIC option.
· On DLL platforms: the import library file (e.g. .lib) of a shared
library target created by the add_library() command with the SHARED
option. This file is only guaranteed to exist if the library exports
at least one unmanaged symbol.
· On DLL platforms: the import library file (e.g. .lib) of an exe‐
cutable target created by the add_executable() command when its
ENABLE_EXPORTS target property is set.
The ARCHIVE_OUTPUT_DIRECTORY and ARCHIVE_OUTPUT_NAME target properties
may be used to control archive output artifact locations and names in
the build tree.
Directory-Scoped Commands
The target_include_directories(), target_compile_definitions() and tar‐
get_compile_options() commands have an effect on only one target at a
time. The commands add_definitions(), add_compile_options() and
include_directories() have a similar function, but operate at directory
scope instead of target scope for convenience.
PSEUDO TARGETS
Some target types do not represent outputs of the buildsystem, but only
inputs such as external dependencies, aliases or other non-build arti‐
facts. Pseudo targets are not represented in the generated buildsys‐
tem.
Imported Targets
An IMPORTED target represents a pre-existing dependency. Usually such
targets are defined by an upstream package and should be treated as
immutable. It is not possible to use an IMPORTED target in the
left-hand-side of the target_compile_definitions(), tar‐
get_include_directories(), target_compile_options() or tar‐
get_link_libraries() commands, as that would be an attempt to modify
it. IMPORTED targets are designed to be used only in the
right-hand-side of those commands.
IMPORTED targets may have the same usage requirement properties popu‐
lated as binary targets, such as INTERFACE_INCLUDE_DIRECTORIES, INTER‐
FACE_COMPILE_DEFINITIONS, INTERFACE_COMPILE_OPTIONS, INTER‐
FACE_LINK_LIBRARIES, and INTERFACE_POSITION_INDEPENDENT_CODE.
The LOCATION may also be read from an IMPORTED target, though there is
rarely reason to do so. Commands such as add_custom_command() can
transparently use an IMPORTED EXECUTABLE target as a COMMAND exe‐
cutable.
The scope of the definition of an IMPORTED target is the directory
where it was defined. It may be accessed and used from subdirectories,
but not from parent directories or sibling directories. The scope is
similar to the scope of a cmake variable.
It is also possible to define a GLOBAL IMPORTED target which is acces‐
sible globally in the buildsystem.
See the cmake-packages(7) manual for more on creating packages with
IMPORTED targets.
Alias Targets
An ALIAS target is a name which may be used interchangably with a
binary target name in read-only contexts. A primary use-case for ALIAS
targets is for example or unit test executables accompanying a library,
which may be part of the same buildsystem or built separately based on
user configuration.
add_library(lib1 lib1.cpp)
install(TARGETS lib1 EXPORT lib1Export ${dest_args})
install(EXPORT lib1Export NAMESPACE Upstream:: ${other_args})
add_library(Upstream::lib1 ALIAS lib1)
In another directory, we can link unconditionally to the Upstream::lib1
target, which may be an IMPORTED target from a package, or an ALIAS
target if built as part of the same buildsystem.
if (NOT TARGET Upstream::lib1)
find_package(lib1 REQUIRED)
endif()
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 Upstream::lib1)
ALIAS targets are not mutable, installable or exportable. They are
entirely local to the buildsystem description. A name can be tested
for whether it is an ALIAS name by reading the ALIASED_TARGET property
from it:
get_target_property(_aliased Upstream::lib1 ALIASED_TARGET)
if(_aliased)
message(STATUS "The name Upstream::lib1 is an ALIAS for ${_aliased}.")
endif()
Interface Libraries
An INTERFACE target has no LOCATION and is mutable, but is otherwise
similar to an IMPORTED target.
It may specify usage requirements such as INTERFACE_INCLUDE_DIRECTO‐
RIES, INTERFACE_COMPILE_DEFINITIONS, INTERFACE_COMPILE_OPTIONS, INTER‐
FACE_LINK_LIBRARIES, INTERFACE_SOURCES, and INTERFACE_POSITION_INDEPEN‐
DENT_CODE. Only the INTERFACE modes of the target_include_directo‐
ries(), target_compile_definitions(), target_compile_options(), tar‐
get_sources(), and target_link_libraries() commands may be used with
INTERFACE libraries.
A primary use-case for INTERFACE libraries is header-only libraries.
add_library(Eigen INTERFACE)
target_include_directories(Eigen INTERFACE
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
$<INSTALL_INTERFACE:include/Eigen>
)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 Eigen)
Here, the usage requirements from the Eigen target are consumed and
used when compiling, but it has no effect on linking.
Another use-case is to employ an entirely target-focussed design for
usage requirements:
add_library(pic_on INTERFACE)
set_property(TARGET pic_on PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
add_library(pic_off INTERFACE)
set_property(TARGET pic_off PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE OFF)
add_library(enable_rtti INTERFACE)
target_compile_options(enable_rtti INTERFACE
$<$<OR:$<COMPILER_ID:GNU>,$<COMPILER_ID:Clang>>:-rtti>
)
add_executable(exe1 exe1.cpp)
target_link_libraries(exe1 pic_on enable_rtti)
This way, the build specification of exe1 is expressed entirely as
linked targets, and the complexity of compiler-specific flags is encap‐
sulated in an INTERFACE library target.
The properties permitted to be set on or read from an INTERFACE library
are:
· Properties matching INTERFACE_*
· Built-in properties matching COMPATIBLE_INTERFACE_*
· EXPORT_NAME
· IMPORTED
· NAME
· Properties matching MAP_IMPORTED_CONFIG_*
INTERFACE libraries may be installed and exported. Any content they
refer to must be installed separately:
add_library(Eigen INTERFACE)
target_include_directories(Eigen INTERFACE
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
$<INSTALL_INTERFACE:include/Eigen>
)
install(TARGETS Eigen EXPORT eigenExport)
install(EXPORT eigenExport NAMESPACE Upstream::
DESTINATION lib/cmake/Eigen
)
install(FILES
${CMAKE_CURRENT_SOURCE_DIR}/src/eigen.h
${CMAKE_CURRENT_SOURCE_DIR}/src/vector.h
${CMAKE_CURRENT_SOURCE_DIR}/src/matrix.h
DESTINATION include/Eigen
)
COPYRIGHT
2000-2015 Kitware, Inc.
3.4.2 February 17, 2016 CMAKE-BUILDSYSTEM(7)