MooseX::Params::ValidaUser)Contributed Perl DocumenMooseX::Params::Validate(3)NAME
MooseX::Params::Validate - an extension of Params::Validate using
Moose's types
VERSION
version 0.16
SYNOPSIS
package Foo;
use Moose;
use MooseX::Params::Validate;
sub foo {
my ( $self, %params ) = validated_hash(
\@_,
bar => { isa => 'Str', default => 'Moose' },
);
return "Hooray for $params{bar}!";
}
sub bar {
my $self = shift;
my ( $foo, $baz, $gorch ) = validated_list(
\@_,
foo => { isa => 'Foo' },
baz => { isa => 'ArrayRef | HashRef', optional => 1 },
gorch => { isa => 'ArrayRef[Int]', optional => 1 }
);
[ $foo, $baz, $gorch ];
}
DESCRIPTION
This module fills a gap in Moose by adding method parameter validation
to Moose. This is just one of many developing options, it should not be
considered the "official" one by any means though.
You might also want to explore "MooseX::Method::Signatures" and
"MooseX::Declare".
CAVEATS
It is not possible to introspect the method parameter specs; they are
created as needed when the method is called and cached for subsequent
calls.
EXPORTS
validated_hash( \@_, %parameter_spec )
This behaves similarly to the standard Params::Validate "validate"
function and returns the captured values in a HASH. The one
exception is where if it spots an instance in the @_, then it will
handle it appropriately (unlike Params::Validate which forces you
to shift you $self first).
The values in @_ can either be a set of name-value pairs or a
single hash reference.
The %parameter_spec accepts the following options:
isa The "isa" option can be either; class name, Moose type
constraint name or an anon Moose type constraint.
does
The "does" option can be either; role name or an anon Moose
type constraint.
default
This is the default value to be used if the value is not
supplied.
optional
As with Params::Validate, all options are considered required
unless otherwise specified. This option is passed directly to
Params::Validate.
coerce
If this is true and the parameter has a type constraint which
has coercions, then the coercion will be called for this
parameter. If the type does have coercions, then this parameter
is ignored.
This function is also available under its old name, "validate".
validated_list( \@_, %parameter_spec )
The %parameter_spec accepts the same options as above, but returns
the parameters as positional values instead of a HASH. This is best
explained by example:
sub foo {
my ( $self, $foo, $bar ) = validated_list(
\@_,
foo => { isa => 'Foo' },
bar => { isa => 'Bar' },
);
$foo->baz($bar);
}
We capture the order in which you defined the parameters and then
return them as a list in the same order. If a param is marked
optional and not included, then it will be set to "undef".
The values in @_ can either be a set of name-value pairs or a
single hash reference.
Like "validated_hash", if it spots an object instance as the first
parameter of @_, it will handle it appropriately, returning it as
the first argument.
This function is also available under its old name, "validatep".
pos_validated_list( \@_, $spec, $spec, ... )
This function validates a list of positional parameters. Each $spec
should validate one of the parameters in the list:
sub foo {
my $self = shift;
my ( $foo, $bar ) = pos_validated_list(
\@_,
{ isa => 'Foo' },
{ isa => 'Bar' },
);
...
}
Unlike the other functions, this function cannot find $self in the
argument list. Make sure to shift it off yourself before doing
validation.
The values in @_ must be a list of values. You cannot pass the
values as an array reference, because this cannot be distinguished
from passing one value which is itself an array reference.
If a parameter is marked as optional and is not present, it will
simply not be returned.
If you want to pass in any of the cache control parameters
described below, simply pass them after the list of parameter
validation specs:
sub foo {
my $self = shift;
my ( $foo, $bar ) = pos_validated_list(
\@_,
{ isa => 'Foo' },
{ isa => 'Bar' },
MX_PARAMS_VALIDATE_NO_CACHE => 1,
);
...
}
ALLOWING EXTRA PARAMETERS
By default, any parameters not mentioned in the parameter spec cause
this module to throw an error. However, you can have have this module
simply ignore them by setting "MX_PARAMS_VALIDATE_ALLOW_EXTRA" to a
true value when calling a validation subroutine.
When calling "validated_hash" or "pos_validated_list" the extra
parameters are simply returned in the hash or list as appropriate.
However, when you call "validated_list" the extra parameters will not
be returned at all. You can get them by looking at the original value
of @_.
EXPORTS
By default, this module exports the "validated_hash", "validated_list",
and "pos_validated_list".
If you would prefer to import the now deprecated functions "validate"
and "validatep" instead, you can use the ":deprecated" tag to import
them.
IMPORTANT NOTE ON CACHING
When a validation subroutine is called the first time, the parameter
spec is prepared and cached to avoid unnecessary regeneration. It uses
the fully qualified name of the subroutine (package + subname) as the
cache key. In 99.999% of the use cases for this module, that will be
the right thing to do.
However, I have (ab)used this module occasionally to handle dynamic
sets of parameters. In this special use case you can do a couple things
to better control the caching behavior.
· Passing in the "MX_PARAMS_VALIDATE_NO_CACHE" flag in the parameter
spec this will prevent the parameter spec from being cached.
sub foo {
my ( $self, %params ) = validated_hash(
\@_,
foo => { isa => 'Foo' },
MX_PARAMS_VALIDATE_NO_CACHE => 1,
);
}
· Passing in "MX_PARAMS_VALIDATE_CACHE_KEY" with a value to be used
as the cache key will bypass the normal cache key generation.
sub foo {
my ( $self, %params ) = validated_hash(
\@_,
foo => { isa => 'Foo' },
MX_PARAMS_VALIDATE_CACHE_KEY => 'foo-42',
);
}
MAINTAINER
Dave Rolsky <autarch@urth.org>
BUGS
Please submit bugs to the CPAN RT system at
http://rt.cpan.org/NoAuth/ReportBug.html?Queue=moosex-params-validate
or via email at bug-moosex-params-validate@rt.cpan.org.
AUTHOR
Stevan Little <stevan.little@iinteractive.com>
COPYRIGHT AND LICENSE
This software is copyright (c) 2011 by Stevan Little
<stevan.little@iinteractive.com>.
This is free software; you can redistribute it and/or modify it under
the same terms as the Perl 5 programming language system itself.
perl v5.16.2 2011-01-29 MooseX::Params::Validate(3)