GIT-DIFF(1)GIT-DIFF(1)NAME
git-diff - Show changes between commits, commit and working tree, etc
SYNOPSIS
git diff [<common diff options>] <commit>{0,2} [--] [<path>...]
DESCRIPTION
Show changes between two trees, a tree and the working tree, a tree and
the index file, or the index file and the working tree.
git diff [--options] [--] [<path>...]
This form is to view the changes you made relative to the index
(staging area for the next commit). In other words, the differ-
ences are what you could tell git to further add to the index
but you still haven’t. You can stage these changes by
using git-add(1).
If exactly two paths are given and at least one points outside
the current repository, git diff will compare the two files /
directories. This behavior can be forced by --no-index.
git diff [--options] --cached [<commit>] [--] [<path>...]
This form is to view the changes you staged for the next commit
relative to the named <commit>. Typically you would want compar-
ison with the latest commit, so if you do not give <commit>, it
defaults to HEAD. --staged is a synonym of --cached.
git diff [--options] <commit> [--] [<path>...]
This form is to view the changes you have in your working tree
relative to the named <commit>. You can use HEAD to compare it
with the latest commit, or a branch name to compare with the tip
of a different branch.
git diff [--options] <commit> <commit> [--] [<path>...]
This is to view the changes between two arbitrary <commit>.
git diff [--options] <commit>..<commit> [--] [<path>...]
This is synonymous to the previous form. If <commit> on one side
is omitted, it will have the same effect as using HEAD instead.
git diff [--options] <commit>...<commit> [--] [<path>...]
This form is to view the changes on the branch containing and up
to the second <commit>, starting at a common ancestor of both
<commit>. "git diff A...B" is equivalent to "git diff
$(git-merge-base A B) B". You can omit any one of <commit>,
which has the same effect as using HEAD instead.
1
GIT-DIFF(1)GIT-DIFF(1)
Just in case if you are doing something exotic, it should be
noted that all of the <commit> in the above description, except
in the last two forms that use ".." notations, can be any
<tree>. The third form (git diff <commit> <commit>) can also be
used to compare two <blob> objects.
For a more complete list of ways to spell <commit>, see "SPECI-
FYING REVISIONS" section in gitrevisions(7). However, "diff" is
about comparing two endpoints, not ranges, and the range nota-
tions ("<commit>..<commit>" and "<commit>...<commit>") do not
mean a range as defined in the "SPECIFYING RANGES" section in
gitrevisions(7).
OPTIONS-p, -u, --patch
Generate patch (see section on generating patches). This is the
default.
-U<n>, --unified=<n>
Generate diffs with <n> lines of context instead of the usual
three. Implies -p.
--raw Generate the raw format.
--patch-with-raw
Synonym for -p --raw.
--patience
Generate a diff using the "patience diff" algorithm.
--stat[=<width>[,<name-width>]]
Generate a diffstat. You can override the default output width
for 80-column terminal by --stat=<width>. The width of the file-
name part can be controlled by giving another width to it sepa-
rated by a comma.
--numstat
Similar to \--stat, but shows number of added and deleted lines
in decimal notation and pathname without abbreviation, to make
it more machine friendly. For binary files, outputs two -
instead of saying 0 0.
--shortstat
Output only the last line of the --stat format containing total
number of modified files, as well as number of added and deleted
2
GIT-DIFF(1)GIT-DIFF(1)
lines.
--dirstat[=<limit>]
Output the distribution of relative amount of changes (number of
lines added or removed) for each sub-directory. Directories with
changes below a cut-off percent (3% by default) are not shown.
The cut-off percent can be set with --dirstat=<limit>. Changes
in a child directory are not counted for the parent directory,
unless --cumulative is used.
--dirstat-by-file[=<limit>]
Same as --dirstat, but counts changed files instead of lines.
--summary
Output a condensed summary of extended header information such
as creations, renames and mode changes.
--patch-with-stat
Synonym for -p --stat.
-z When --raw, --numstat, --name-only or --name-status has been
given, do not munge pathnames and use NULs as output field ter-
minators.
Without this option, each pathname output will have TAB, LF,
double quotes, and backslash characters replaced with \t, \n,
\", and \\, respectively, and the pathname will be enclosed in
double quotes if any of those replacements occurred.
--name-only
Show only names of changed files.
--name-status
Show only names and status of changed files. See the description
of the --diff-filter option on what the status letters mean.
--submodule[=<format>]
Chose the output format for submodule differences. <format> can
be one of short and log. short just shows pairs of commit names,
this format is used when this option is not given. log is the
default value for this option and lists the commits in that com-
mit range like the summary option of git-submodule(1) does.
--color[=<when>]
Show colored diff. The value must be always (the default),
3
GIT-DIFF(1)GIT-DIFF(1)
never, or auto.
--no-color
Turn off colored diff, even when the configuration file gives
the default to color output. Same as --color=never.
--word-diff[=<mode>]
Show a word diff, using the <mode> to delimit changed words. By
default, words are delimited by whitespace; see
--word-diff-regex below. The <mode> defaults to plain, and must
be one of:
color Highlight changed words using only colors. Implies
--color.
plain Show words as [-removed-] and {+added+}. Makes no
attempts to escape the delimiters if they appear in the
input, so the output may be ambiguous.
porcelain
Use a special line-based format intended for script con-
sumption. Added/removed/unchanged runs are printed in the
usual unified diff format, starting with a +/-/` ` char-
acter at the beginning of the line and extending to the
end of the line. Newlines in the input are represented by
a tilde ~ on a line of its own.
none Disable word diff again.
Note that despite the name of the first mode, color is used to
highlight the changed parts in all modes if enabled.
--word-diff-regex=<regex>
Use <regex> to decide what a word is, instead of considering
runs of non-whitespace to be a word. Also implies --word-diff
unless it was already enabled.
Every non-overlapping match of the <regex> is considered a word.
Anything between these matches is considered whitespace and
ignored(!) for the purposes of finding differences. You may want
to append |[^[:space:]] to your regular expression to make sure
that it matches all non-whitespace characters. A match that con-
tains a newline is silently truncated(!) at the newline.
4
GIT-DIFF(1)GIT-DIFF(1)
The regex can also be set via a diff driver or configuration
option, see gitattributes(1) or git-config(1). Giving it explic-
itly overrides any diff driver or configuration setting. Diff
drivers override configuration settings.
--color-words[=<regex>]
Equivalent to --word-diff=color plus (if a regex was specified)
--word-diff-regex=<regex>.
--no-renames
Turn off rename detection, even when the configuration file
gives the default to do so.
--check
Warn if changes introduce trailing whitespace or an indent that
uses a space before a tab. Exits with non-zero status if prob-
lems are found. Not compatible with --exit-code.
--full-index
Instead of the first handful of characters, show the full pre-
and post-image blob object names on the "index" line when gener-
ating patch format output.
--binary
In addition to --full-index, output a binary diff that can be
applied with git-apply.
--abbrev[=<n>]
Instead of showing the full 40-byte hexadecimal object name in
diff-raw format output and diff-tree header lines, show only a
partial prefix. This is independent of the --full-index option
above, which controls the diff-patch output format. Non default
number of digits can be specified with --abbrev=<n>.
-B[<n>][/<m>]
Break complete rewrite changes into pairs of delete and create.
This serves two purposes:
It affects the way a change that amounts to a total rewrite of a
file not as a series of deletion and insertion mixed together
with a very few lines that happen to match textually as the con-
text, but as a single deletion of everything old followed by a
single insertion of everything new, and the number m controls
this aspect of the -B option (defaults to 60%). -B/70% specifies
that less than 30% of the original should remain in the result
for git to consider it a total rewrite (i.e. otherwise the
resulting patch will be a series of deletion and insertion mixed
5
GIT-DIFF(1)GIT-DIFF(1)
together with context lines).
When used with -M, a totally-rewritten file is also considered
as the source of a rename (usually -M only considers a file that
disappeared as the source of a rename), and the number n con-
trols this aspect of the -B option (defaults to 50%). -B20%
specifies that a change with addition and deletion compared to
20% or more of the file’s size are eligible for being
picked up as a possible source of a rename to another file.
-M[<n>]
Detect renames. If n is specified, it is a is a threshold on the
similarity index (i.e. amount of addition/deletions compared to
the file’s size). For example, -M90% means git should con-
sider a delete/add pair to be a rename if more than 90% of the
file hasn’t changed.
-C[<n>]
Detect copies as well as renames. See also --find-copies-harder.
If n is specified, it has the same meaning as for -M<n>.
--find-copies-harder
For performance reasons, by default, -C option finds copies only
if the original file of the copy was modified in the same
changeset. This flag makes the command inspect unmodified files
as candidates for the source of copy. This is a very expensive
operation for large projects, so use it with caution. Giving
more than one -C option has the same effect.
-l<num>
The -M and -C options require O(n^2) processing time where n is
the number of potential rename/copy targets. This option pre-
vents rename/copy detection from running if the number of
rename/copy targets exceeds the specified number.
--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]
Select only files that are Added (A), Copied (C), Deleted (D),
Modified (M), Renamed (R), have their type (i.e. regular file,
symlink, submodule, ...) changed (T), are Unmerged (U), are
Unknown (X), or have had their pairing Broken (B). Any combina-
tion of the filter characters (including none) can be used. When
* (All-or-none) is added to the combination, all paths are
selected if there is any file that matches other criteria in the
comparison; if there is no file that matches other criteria,
nothing is selected.
-S<string>
Look for differences that introduce or remove an instance of
6
GIT-DIFF(1)GIT-DIFF(1)
<string>. Note that this is different than the string simply
appearing in diff output; see the pickaxe entry in gitdiff-
core(7) for more details.
--pickaxe-all
When -S finds a change, show all the changes in that changeset,
not just the files that contain the change in <string>.
--pickaxe-regex
Make the <string> not a plain string but an extended POSIX regex
to match.
-O<orderfile>
Output the patch in the order specified in the <orderfile>,
which has one shell glob pattern per line.
-R Swap two inputs; that is, show differences from index or on-disk
file to tree contents.
--relative[=<path>]
When run from a subdirectory of the project, it can be told to
exclude changes outside the directory and show pathnames rela-
tive to it with this option. When you are not in a subdirectory
(e.g. in a bare repository), you can name which subdirectory to
make the output relative to by giving a <path> as an argument.
-a, --text
Treat all files as text.
--ignore-space-at-eol
Ignore changes in whitespace at EOL.
-b, --ignore-space-change
Ignore changes in amount of whitespace. This ignores whitespace
at line end, and considers all other sequences of one or more
whitespace characters to be equivalent.
-w, --ignore-all-space
Ignore whitespace when comparing lines. This ignores differences
even if one line has whitespace where the other line has none.
--inter-hunk-context=<lines>
Show the context between diff hunks, up to the specified number
of lines, thereby fusing hunks that are close to each other.
7
GIT-DIFF(1)GIT-DIFF(1)--exit-code
Make the program exit with codes similar to diff(1). That is, it
exits with 1 if there were differences and 0 means no differ-
ences.
--quiet
Disable all output of the program. Implies --exit-code.
--ext-diff
Allow an external diff helper to be executed. If you set an
external diff driver with gitattributes(5), you need to use this
option with git-log(1) and friends.
--no-ext-diff
Disallow external diff drivers.
--ignore-submodules[=<when>]
Ignore changes to submodules in the diff generation. <when> can
be either "none", "untracked", "dirty" or "all", which is the
default Using "none" will consider the submodule modified when
it either contains untracked or modified files or its HEAD dif-
fers from the commit recorded in the superproject and can be
used to override any settings of the ignore option in git-con-
fig(1) or gitmodules(5). When "untracked" is used submodules are
not considered dirty when they only contain untracked content
(but they are still scanned for modified content). Using "dirty"
ignores all changes to the work tree of submodules, only changes
to the commits stored in the superproject are shown (this was
the behavior until 1.7.0). Using "all" hides all changes to sub-
modules.
--src-prefix=<prefix>
Show the given source prefix instead of "a/".
--dst-prefix=<prefix>
Show the given destination prefix instead of "b/".
--no-prefix
Do not show any source or destination prefix.
For more detailed explanation on these common options, see also
gitdiffcore(7).
<path>...
The <paths> parameters, when given, are used to limit the diff
8
GIT-DIFF(1)GIT-DIFF(1)
to the named paths (you can give directory names and get diff
for all files under them).
RAW OUTPUT FORMAT
The raw output format from "git-diff-index", "git-diff-tree",
"git-diff-files" and "git diff --raw" are very similar.
These commands all compare two sets of things; what is compared dif-
fers:
git-diff-index <tree-ish>
compares the <tree-ish> and the files on the filesystem.
git-diff-index --cached <tree-ish>
compares the <tree-ish> and the index.
git-diff-tree [-r] <tree-ish-1> <tree-ish-2> [<pattern>...]
compares the trees named by the two arguments.
git-diff-files [<pattern>...]
compares the index and the files on the filesystem.
The "git-diff-tree" command begins its output by printing the
hash of what is being compared. After that, all the commands
print one output line per changed file.
An output line is formatted this way:
.ft C
in-place edit :100644 100644 bcd1234... 0123456... M file0
copy-edit :100644 100644 abcd123... 1234567... C68 file1 file2
rename-edit :100644 100644 abcd123... 1234567... R86 file1 file3
create :000000 100644 0000000... 1234567... A file4
delete :100644 000000 1234567... 0000000... D file5
unmerged :000000 000000 0000000... 0000000... U file6
.ft
That is, from the left to the right:
1. a colon.
9
GIT-DIFF(1)GIT-DIFF(1)
2. mode for "src"; 000000 if creation or unmerged.
3. a space.
4. mode for "dst"; 000000 if deletion or unmerged.
5. a space.
6. sha1 for "src"; 0{40} if creation or unmerged.
7. a space.
8. sha1 for "dst"; 0{40} if creation, unmerged or "look at work tree".
9. a space.
10.
status, followed by optional "score" number.
11.
a tab or a NUL when -z option is used.
12.
path for "src"
13.
a tab or a NUL when -z option is used; only exists for C or R.
14.
path for "dst"; only exists for C or R.
15.
an LF or a NUL when -z option is used, to terminate the record.
Possible status letters are:
o A: addition of a file
o C: copy of a file into a new one
o D: deletion of a file
o M: modification of the contents or mode of a file
o R: renaming of a file
o T: change in the type of the file
o U: file is unmerged (you must complete the merge before it can be
committed)
10
GIT-DIFF(1)GIT-DIFF(1)
o X: "unknown" change type (most probably a bug, please report it)
Status letters C and R are always followed by a score (denoting the
percentage of similarity between the source and target of the move or
copy), and are the only ones to be so.
<sha1> is shown as all 0’s if a file is new on the filesystem and
it is out of sync with the index.
Example:
.ft C
:100644 100644 5be4a4...... 000000...... M file.c
.ft
When -z option is not used, TAB, LF, and backslash characters in path-
names are represented as \t, \n, and \\, respectively.
DIFF FORMAT FOR MERGES
"git-diff-tree", "git-diff-files" and "git-diff --raw" can take -c or
--cc option to generate diff output also for merge commits. The output
differs from the format described above in the following way:
1. there is a colon for each parent
2. there are more "src" modes and "src" sha1
3. status is concatenated status characters for each parent
4. no optional "score" number
5. single path, only for "dst"
Example:
.ft C
::100644 100644 100644 fabadb8... cc95eb0... 4866510... MM describe.c
.ft
11
GIT-DIFF(1)GIT-DIFF(1)
Note that combined diff lists only files which were modified from all
parents.
GENERATING PATCHES WITH -P
When "git-diff-index", "git-diff-tree", or "git-diff-files" are run
with a -p option, "git diff" without the --raw option, or "git log"
with the "-p" option, they do not produce the output described above;
instead they produce a patch file. You can customize the creation of
such patches via the GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environ-
ment variables.
What the -p option produces is slightly different from the traditional
diff format:
1. It is preceded with a "git diff" header that looks like this:
diff --git a/file1 b/file2
The a/ and b/ filenames are the same unless rename/copy is involved.
Especially, even for a creation or a deletion, /dev/null is not used
in place of the a/ or b/ filenames.
When rename/copy is involved, file1 and file2 show the name of the
source file of the rename/copy and the name of the file that
rename/copy produces, respectively.
2. It is followed by one or more extended header lines:
old mode <mode>
new mode <mode>
deleted file mode <mode>
new file mode <mode>
copy from <path>
copy to <path>
rename from <path>
rename to <path>
similarity index <number>
dissimilarity index <number>
index <hash>..<hash> <mode>
File modes are printed as 6-digit octal numbers including the file
type and file permission bits.
Path names in extended headers do not include the a/ and b/ pre-
fixes.
The similarity index is the percentage of unchanged lines, and the
dissimilarity index is the percentage of changed lines. It is a
rounded down integer, followed by a percent sign. The similarity
index value of 100% is thus reserved for two equal files, while 100%
dissimilarity means that no line from the old file made it into the
12
GIT-DIFF(1)GIT-DIFF(1)
new one.
The index line includes the SHA-1 checksum before and after the
change. The <mode> is included if the file mode does not change;
otherwise, separate lines indicate the old and the new mode.
3. TAB, LF, double quote and backslash characters in pathnames are rep-
resented as \t, \n, \" and \\, respectively. If there is need for
such substitution then the whole pathname is put in double quotes.
4. All the file1 files in the output refer to files before the commit,
and all the file2 files refer to files after the commit. It is
incorrect to apply each change to each file sequentially. For exam-
ple, this patch will swap a and b:
diff --git a/a b/b
rename from a
rename to b
diff --git a/b b/a
rename from b
rename to a
COMBINED DIFF FORMAT
"git-diff-tree", "git-diff-files" and "git-diff" can take -c or --cc
option to produce combined diff. For showing a merge commit with "git
log -p", this is the default format; you can force showing full diff
with the -m option. A combined diff format looks like this:
.ft C
diff --combined describe.c
index fabadb8,cc95eb0..4866510
--- a/describe.c
+++ b/describe.c
@@@ -98,20 -98,12 +98,20 @@@
return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
}
- static void describe(char *arg)
-static void describe(struct commit *cmit, int last_one)
++static void describe(char *arg, int last_one)
{
+ unsigned char sha1[20];
+ struct commit *cmit;
struct commit_list *list;
static int initialized = 0;
struct commit_name *n;
+ if (get_sha1(arg, sha1) < 0)
+ usage(describe_usage);
+ cmit = lookup_commit_reference(sha1);
13
GIT-DIFF(1)GIT-DIFF(1)
+ if (!cmit)
+ usage(describe_usage);
+
if (!initialized) {
initialized = 1;
for_each_ref(get_name);
.ft
1. It is preceded with a "git diff" header, that looks like this (when
-c option is used):
diff --combined file
or like this (when --cc option is used):
diff --cc file
2. It is followed by one or more extended header lines (this example
shows a merge with two parents):
index <hash>,<hash>..<hash>
mode <mode>,<mode>..<mode>
new file mode <mode>
deleted file mode <mode>,<mode>
The mode <mode>,<mode>..<mode> line appears only if at least one of
the <mode> is different from the rest. Extended headers with infor-
mation about detected contents movement (renames and copying detec-
tion) are designed to work with diff of two <tree-ish> and are not
used by combined diff format.
3. It is followed by two-line from-file/to-file header
--- a/file
+++ b/file
Similar to two-line header for traditional unified diff format,
/dev/null is used to signal created or deleted files.
4. Chunk header format is modified to prevent people from accidentally
feeding it to patch -p1. Combined diff format was created for review
of merge commit changes, and was not meant for apply. The change is
similar to the change in the extended index header:
@@@ <from-file-range> <from-file-range> <to-file-range> @@@
There are (number of parents + 1) @ characters in the chunk header
for combined diff format.
14
GIT-DIFF(1)GIT-DIFF(1)
Unlike the traditional unified diff format, which shows two files A and
B with a single column that has - (minus -- appears in A
but removed in B), + (plus -- missing in A but added to B),
or " " (space -- unchanged) prefix, this format compares
two or more files file1, file2,... with one file X, and shows how X
differs from each of fileN. One column for each of fileN is prepended
to the output line to note how X’s line is different from it.
A - character in the column N means that the line appears in fileN but
it does not appear in the result. A + character in the column N means
that the line appears in the result, and fileN does not have that line
(in other words, the line was added, from the point of view of that
parent).
In the above example output, the function signature was changed from
both files (hence two - removals from both file1 and file2, plus ++ to
mean one line that was added does not appear in either file1 nor
file2). Also eight other lines are the same from file1 but do not
appear in file2 (hence prefixed with {plus}).
When shown by git diff-tree -c, it compares the parents of a merge com-
mit with the merge result (i.e. file1..fileN are the parents). When
shown by git diff-files -c, it compares the two unresolved merge par-
ents with the working tree file (i.e. file1 is stage 2 aka "our ver-
sion", file2 is stage 3 aka "their version").
OTHER DIFF FORMATS
The --summary option describes newly added, deleted, renamed and copied
files. The --stat option adds diffstat(1) graph to the output. These
options can be combined with other options, such as -p, and are meant
for human consumption.
When showing a change that involves a rename or a copy, --stat output
formats the pathnames compactly by combining common prefix and suffix
of the pathnames. For example, a change that moves arch/i386/Makefile
to arch/x86/Makefile while modifying 4 lines will be shown like this:
.ft C
arch/{i386 => x86}/Makefile | 4 +--
.ft
The --numstat option gives the diffstat(1) information but is designed
for easier machine consumption. An entry in --numstat output looks like
this:
15
GIT-DIFF(1)GIT-DIFF(1)
.ft C
1 2 README
3 1 arch/{i386 => x86}/Makefile
.ft
That is, from left to right:
1. the number of added lines;
2. a tab;
3. the number of deleted lines;
4. a tab;
5. pathname (possibly with rename/copy information);
6. a newline.
When -z output option is in effect, the output is formatted this way:
.ft C
1 2 README NUL
3 1 NUL arch/i386/Makefile NUL arch/x86/Makefile NUL
.ft
That is:
1. the number of added lines;
2. a tab;
3. the number of deleted lines;
4. a tab;
5. a NUL (only exists if renamed/copied);
6. pathname in preimage;
7. a NUL (only exists if renamed/copied);
16
GIT-DIFF(1)GIT-DIFF(1)
8. pathname in postimage (only exists if renamed/copied);
9. a NUL.
The extra NUL before the preimage path in renamed case is to allow
scripts that read the output to tell if the current record being read
is a single-path record or a rename/copy record without reading ahead.
After reading added and deleted lines, reading up to NUL would yield
the pathname, but if that is NUL, the record will show two paths.
EXAMPLES
Various ways to check your working tree
.ft C
$ git diff (1)
$ git diff --cached (2)
$ git diff HEAD (3)
.ft
1. Changes in the working tree not yet staged for the next com-
mit.
2. Changes between the index and your last commit; what you
would be committing if you run "git commit" without "-a" option.
3. Changes in the working tree since your last commit; what you
would be committing if you run "git commit -a"
Comparing with arbitrary commits
.ft C
$ git diff test (1)
$ git diff HEAD -- ./test (2)
$ git diff HEAD^ HEAD (3)
.ft
1. Instead of using the tip of the current branch, compare with
the tip of "test" branch.
2. Instead of comparing with the tip of "test" branch, compare
with the tip of the current branch, but limit the comparison to
the file "test".
3. Compare the version before the last commit and the last com-
mit.
17
GIT-DIFF(1)GIT-DIFF(1)
Comparing branches
.ft C
$ git diff topic master (1)
$ git diff topic..master (2)
$ git diff topic...master (3)
.ft
1. Changes between the tips of the topic and the master
branches.
2. Same as above.
3. Changes that occurred on the master branch since when the
topic branch was started off it.
Limiting the diff output
.ft C
$ git diff --diff-filter=MRC (1)
$ git diff --name-status (2)
$ git diff arch/i386 include/asm-i386 (3)
.ft
1. Show only modification, rename and copy, but not addition nor
deletion.
2. Show only names and the nature of change, but not actual diff
output.
3. Limit diff output to named subtrees.
Munging the diff output
.ft C
$ git diff --find-copies-harder -B -C (1)
$ git diff -R (2)
.ft
1. Spend extra cycles to find renames, copies and complete
rewrites (very expensive).
2. Output diff in reverse.
18
GIT-DIFF(1)GIT-DIFF(1)SEE ALSOdiff(1), git-difftool(1), git-log(1), gitdiffcore(7), git-for-
mat-patch(1), git-apply(1)AUTHOR
Written by Linus Torvalds <torvalds@osdl.org: mailto:torvalds@osdl.org>
DOCUMENTATION
Documentation by Junio C Hamano and the git-list <git@vger.kernel.org:
mailto:git@vger.kernel.org>.
GIT
Part of the git(1) suite
19