FENCE_AGENT(8)FENCE_AGENT(8)NAMEfence_ipdu - Fence agent for iPDU over SNMP
DESCRIPTIONfence_ipdu is an I/O Fencing agent which can be used with the IBM iPDU
network power switch. It logs into a device via SNMP and reboots a
specified outlet. It supports SNMP v3 with all combinations of authenā
ticity/privacy settings.
fence_ipdu accepts options on the command line as well as from stdin.
Fenced sends parameters through stdin when it execs the agent.
fence_ipdu can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.ibm.com
PARAMETERS-a, --ip=[ip]
IP Address or Hostname This parameter is always required.
-l, --username=[name]
Login Name
-p, --password=[password]
Login password or passphrase
-n, --plug=[id]
Physical plug number, name of virtual machine or UUID This
parameter is always required.
-d, --snmp-version=[version]
Specifies SNMP version to use (1,2c,3) (Default Value: 3)
-c, --community=[community]
Set the community string (Default Value: private)
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value:
161)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-S, --password-script=[script]
Script to retrieve password
-b, --snmp-auth-prot=[prot]
Set authentication protocol (MD5|SHA)
-E, --snmp-sec-level=[level]
Set security level (noAuthNoPriv|authNoPriv|authPriv)
-B, --snmp-priv-prot=[prot]
Set privacy protocol (DES|AES)
-P, --snmp-priv-passwd=[pass]
Set privacy protocol password
-R, --snmp-priv-passwd-script
Script to run to retrieve privacy password
-o, --action=[action]
Fencing Action (Default Value: reboot)
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by operation list (Default Value: ,)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value:
20)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is
support for more then one device. Returns N/A otherwise.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required.
login Login Name
passwd Login password or passphrase
port Physical plug number, name of virtual machine or UUID This
parameter is always required.
snmp_version
Specifies SNMP version to use (1,2c,3) (Default Value: 3)
community
Set the community string (Default Value: private)
ipport TCP/UDP port to use for connection with device (Default Value:
161)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
passwd_script
Script to retrieve password
snmp_auth_prot
Set authentication protocol (MD5|SHA)
snmp_sec_level
Set security level (noAuthNoPriv|authNoPriv|authPriv)
snmp_priv_prot
Set privacy protocol (DES|AES)
snmp_priv_passwd
Set privacy protocol password
snmp_priv_passwd_script
Script to run to retrieve privacy password
action Fencing Action (Default Value: reboot)
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value:
20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_ipdu (Fence Agent) 2009-10-20 FENCE_AGENT(8)