FENCE_AGENT(8)FENCE_AGENT(8)NAMEfence_rsb - I/O Fencing agent for Fujitsu-Siemens RSB
DESCRIPTIONfence_rsb is an I/O Fencing agent which can be used with the Fujitsu-
Siemens RSB management interface. It logs into device via telnet/ssh
and reboots a specified outlet. Lengthy telnet/ssh connections should
be avoided while a GFS cluster is running because the connection will
block any necessary fencing actions.
fence_rsb accepts options on the command line as well as from stdin.
Fenced sends parameters through stdin when it execs the agent.
fence_rsb can be run by itself with command line options. This is use‐
ful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.fujitsu.com
PARAMETERS-a, --ip=[ip]
IP Address or Hostname This parameter is always required.
-l, --username=[name]
Login Name This parameter is always required.
-p, --password=[password]
Login password or passphrase
-x, --ssh
SSH connection
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['to
quit:'])
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value:
3172)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-S, --password-script=[script]
Script to retrieve password
-k, --identity-file=[filename]
Identity file for ssh
--ssh-options=[options]
SSH options to use
-o, --action=[action]
Fencing Action (Default Value: reboot)
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value:
20)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is
support for more then one device. Returns N/A otherwise.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
secure SSH connection
cmd_prompt
Force Python regex for command prompt (Default Value: ['to
quit:'])
ipport TCP/UDP port to use for connection with device (Default Value:
3172)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
passwd_script
Script to retrieve password
identity_file
Identity file for ssh
ssh_options
SSH options to use
action Fencing Action (Default Value: reboot)
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
power_timeout
Test X seconds for status change after ON/OFF (Default Value:
20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_rsb (Fence Agent) 2009-10-20 FENCE_AGENT(8)