FDFORMAT(8) System Administration FDFORMAT(8)NAME
fdformat - low-level format a floppy disk
SYNOPSIS
fdformat [options] device
DESCRIPTION
fdformat does a low-level format on a floppy disk. device is usually
one of the following (for floppy devices the major = 2, and the minor
is shown for informational purposes only):
/dev/fd0d360 (minor = 4)
/dev/fd0h1200 (minor = 8)
/dev/fd0D360 (minor = 12)
/dev/fd0H360 (minor = 12)
/dev/fd0D720 (minor = 16)
/dev/fd0H720 (minor = 16)
/dev/fd0h360 (minor = 20)
/dev/fd0h720 (minor = 24)
/dev/fd0H1440 (minor = 28)
/dev/fd1d360 (minor = 5)
/dev/fd1h1200 (minor = 9)
/dev/fd1D360 (minor = 13)
/dev/fd1H360 (minor = 13)
/dev/fd1D720 (minor = 17)
/dev/fd1H720 (minor = 17)
/dev/fd1h360 (minor = 21)
/dev/fd1h720 (minor = 25)
/dev/fd1H1440 (minor = 29)
The generic floppy devices, /dev/fd0 and /dev/fd1, will fail to work
with fdformat when a non-standard format is being used, or if the for‐
mat has not been autodetected earlier. In this case, use setfdprm(8)
to load the disk parameters.
OPTIONS-n, --no-verify
Skip the verification that is normally performed after the for‐
matting.
-V, --version
Output version information and exit.
-h, --help
Display help and exit.
SEE ALSOfd(4), setfdprm(8), mkfs(8), emkfs(8)AUTHOR
Werner Almesberger (almesber@nessie.cs.id.ethz.ch)
AVAILABILITY
The fdformat command is part of the util-linux package and is available
from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.
util-linux July 2011 FDFORMAT(8)