SYSINFO(1m)							   SYSINFO(1m)

NAME
       sysinfo -- Output information about this SmartOS system.

SYNOPSIS
       sysinfo [<options>]

DESCRIPTION
       The  sysinfo  tool  allows  you to gather several pieces of information
       about a SmartOS host in one place.  With no arguments  system  info  is
       written to stdout as a JSON object.

       As  some	 of  the  data	can take some time to gather and most does not
       change after the system is up, the data is cached.  This allows sysinfo
       to  return quickly after the cache has been created.  Any scripts which
       modify data that is included in the sysinfo output should run  ´sysinfo
       -u´ to update the cache after making changes.

OPTIONS
       -f
	   force an update of cache and then output the updated
	   data

       -p
	   output parseable key=value format instead of JSON
	   (JSON is the default)

       -u
	   update the cache only, do not output anything

       -?
	   Print help and exit.

FIELDS
	 The fields of the JSON output from sysinfo are listed
	 below along with a brief description.	They´re also
	 marked as one of:

	   GZ only	   -- only available in sysinfo output from the global zone
	   NGZ only	   -- only available in sysinfo output from a non-global zone
	   GZ and NGZ	   -- available in sysinfo output from global or non-global
	   GZ SDC only	   -- same as GZ only but also only available in Joyent´s SDC

	 "Boot Parameters"

	   An object containing key/value pairs that were passed on the kernel command
	   line.

	   GZ only

	 "Boot Time"

	   Timestamp (seconds since 1970-01-01 00:00:00 UTC) at which the system was
	   booted.  For a non-global zone, this is the time the zone was booted.

	   GZ and NGZ

	 "CPU Physical Cores"

	   Number of physical CPUs in this host.

	   GZ only

	 "CPU Total Cores"

	   The number of CPU cores in this host.

	   GZ only

	 "CPU Type"

	   The model of CPU in this host. Eg. "Intel(R) Xeon(R) CPU E5530 @ 2.40GHz".

	   GZ only

	 "CPU Virtualization"

	   Which CPU Virtualization features this host supports.
	   Will be one of: ´none´, ´vmx´, ´svm´

	   GZ only

	 "Datacenter Name"

	   This indicates the name of the datacenter in which this node is running.

	   GZ SDC Only

	 "Disks"

	   This is an object containing information about disks on the system.	Each
	   disk is represented by another object (keyed on disk name) which includes
	   the size in GB of that disk.

	   GZ only

	 "Hostname"

	   The results of `hostname`.

	   GZ and NGZ

	 "Link Aggregations"

	   An object with a member for each link aggregation configured on the
	   machine.  Entries include the LACP mode and names of the interfaces
	   in the aggregation.

	   GZ only

	 "Live Image"

	   This is the build stamp of the current platform.

	   GZ and NGZ

	 "Manufacturer"

	   This is the name of the Hardware Manufacturer as set in the SMBIOS.
	   Eg. "Dell".

	   GZ only

	 "MiB of Memory"

	   The amount of DRAM (in MiB) available to processes.	For the GZ this is the
	   amount available to the system.  For a non-global zone, this is the cap on
	   memory for this zone.

	   GZ and NGZ

	 "Network Interfaces"

	   An object with a member for each physical NIC attached to the machine.
	   Entries include the MAC, ip4addr, Link Status and NIC Names (tags) for each
	   interface.

	   GZ only

	 "Product"

	   This is the name of the Product as set by your hardware vendor in the SMBIOS
	   Eg. "PowerEdge R710".

	   GZ only

	 "SDC Agents"

	   In SDC this is an array of installed agents and their versions.

	   GZ SDC only

	 "SDC Version"

	   The version of SDC this platform belongs to.

	   GZ SDC Only

	 "Serial Number"

	   Manufacturers serial number as set in SMBIOS.

	   GZ only

	 "Setup"

	   Used to indicate whether the machine has been setup and is ready for
	   provisioning.

	   GZ SDC only

	 "System Type"

	   This is the output of ´uname -s´.

	   GZ and NGZ

	 "UUID"

	   Universally unique identifier for this machine.  In the GZ this will be the
	   UUID from the SMBIOS info.  In a zone this will be the UUID of the zone.

	   GZ and NGZ

	 "Virtual Network Interfaces"

	   An object with a member for each virtual NIC attached to the machine.
	   Entries include the MAC Address, ip4addr, Link Status and VLAN for each
	   interface.  In the GZ you also can see the "Host Interface" a vnic is
	   attached to.

	   GZ and NGZ

	 "VM Capable"

	   This is set to ´true´ when this host can start KVM brand VMs.
	   Note: This does not necessarily mean that the KVM driver will load.

	   GZ only

	 "ZFS Quota"

	   In a non-global zone, this will give you the quota on your zone´s zoneroot.

	   NGZ only

	 "Zpool"

	   The name of the system zpool as set by smartdc-init.	 (usually: ´zones´)

	   GZ only

	 "Zpool Disks"

	   This is a comma separated list of disks that are part of the zpool.

	   GZ only

	 "Zpool Profile"

	   This displays the proile of the zpool´s disks.
	   Will be one of: mirror, raidz3, raidz2, raidz, striped

	   GZ only

	 "Zpool Size in GiB"

	   The total size of the zpool in GiB.

	   GZ only

SEE ALSO
       dladm(1m), hostname(1), ifconfig(1m), prtconf(1m), psrinfo(1m), smbios(1m), uname(1), zfs(1m), zpool(1m)

				   May 2014			   SYSINFO(1m)

Vote for polarhome