DIAL(3NSL)DIAL(3NSL)NAME
dial, undial - establish an outgoing terminal line connection
SYNOPSIS
cc [ flag... ] file... -lnsl [ library... ]
#include <dial.h>
int dial(CALL call);
void undial(int fd);
DESCRIPTION
The dial() function returns a file-descriptor for a terminal line open
for read/write. The argument to dial() is a CALL structure (defined in
the header <dial.h>).
When finished with the terminal line, the calling program must invoke
undial() to release the semaphore that has been set during the alloca‐
tion of the terminal device.
CALL is defined in the header <dial.h> and has the following members:
struct termio *attr; /* pointer to termio attribute struct */
int baud; /* transmission data rate */
int speed; /* 212A modem: low=300, high=1200 */
char *line; /* device name for out-going line */
char *telno; /* pointer to tel-no digits string */
int modem; /* specify modem control for direct lines */
char *device; /* unused */
int dev_len; /* unused */
The CALL element speed is intended only for use with an outgoing dialed
call, in which case its value should be the desired transmission baud
rate. The CALL element baud is no longer used.
If the desired terminal line is a direct line, a string pointer to its
device-name should be placed in the line element in the CALL structure.
Legal values for such terminal device names are kept in the Devices
file. In this case, the value of the baud element should be set to -1.
This value will cause dial to determine the correct value from the
<Devices> file.
The telno element is for a pointer to a character string representing
the telephone number to be dialed. Such numbers may consist only of
these characters:
0-9 dial 0-9
* dail *
# dail #
───── wait for secondary dial tone
- delay for approximately 4 seconds
The CALL element modem is used to specify modem control for direct
lines. This element should be non-zero if modem control is required.
The CALL element attr is a pointer to a termio structure, as defined in
the header <termio.h>. A NULL value for this pointer element may be
passed to the dial function, but if such a structure is included, the
elements specified in it will be set for the outgoing terminal line
before the connection is established. This setting is often important
for certain attributes such as parity and baud-rate.
The CALL elements device and dev_len are no longer used. They are
retained in the CALL structure for compatibility reasons.
RETURN VALUES
On failure, a negative value indicating the reason for the failure will
be returned. Mnemonics for these negative indices as listed here are
defined in the header <dial.h>.
INTRPT −1 /* interrupt occurred */
D_HUNG −2 /* dialer hung (no return from write) */
NO_ANS −3 /* no answer within 10 seconds */
ILL_BD −4 /* illegal baud-rate */
A_PROB −5 /* acu problem (open() failure) */
L_PROB −6 /* line problem (open() failure) */
NO_Ldv −7 /* can't open Devices file */
DV_NT_A −8 /* requested device not available */
DV_NT_K −9 /* requested device not known */
NO_BD_A −10 /* no device available at requested baud */
NO_BD_K −11 /* no device known at requested baud */
DV_NT_E −12 /* requested speed does not match */
BAD_SYS −13 /* system not in Systems file*/
FILES
/etc/uucp/Devices
/etc/uucp/Systems
/var/spool/uucp/LCK..tty-device
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌───────────────┬─────────────────┐
│ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├───────────────┼─────────────────┤
│MT-Level │ Unsafe │
└───────────────┴─────────────────┘
SEE ALSOuucp(1C), alarm(2), read(2), write(2), attributes(5), termio(7I)NOTES
Including the header <dial.h> automatically includes the header
<termio.h>. An alarm(2) system call for 3600 seconds is made (and
caught) within the dial module for the purpose of ``touching'' the
LCK.. file and constitutes the device allocation semaphore for the ter‐
minal device. Otherwise, uucp(1C) may simply delete the LCK.. entry on
its 90-minute clean-up rounds. The alarm may go off while the user pro‐
gram is in a read(2) or write(2) function, causing an apparent error
return. If the user program expects to be around for an hour or more,
error returns from read()s should be checked for (errno==EINTR), and
the read() possibly reissued.
This interface is unsafe in multithreaded applications. Unsafe inter‐
faces should be called only from the main thread.
Dec 30, 1996 DIAL(3NSL)