grid(3) User Contributed Perl Documentation grid(3)NAMETk::grid - Geometry manager that arranges widgets in a grid
SYNOPSISDESCRIPTION
The grid method is used to communicate with the grid geometry manager
that arranges widgets in rows and columns inside of another window,
called the geometry master (or master window). The grid method can
have any of several forms, depending on the option argument:
$slave->grid(?$slave, ...??, options?)
The arguments consist of the optional references to more slave
windows followed by pairs of arguments that specify how to manage
the slaves. The characters -, x and ^, can be specified instead
of a window reference to alter the default location of a $slave, as
described in "RELATIVE PLACEMENT", below.
If any of the slaves are already managed by the geometry manager
then any unspecified options for them retain their previous values
rather than receiving default values.
The following options are supported:
-column => n
Insert the $slave so that it occupies the nth column in the
grid. Column numbers start with 0. If this option is not
supplied, then the $slave is arranged just to the right of
previous slave specified on this call to grid, or column
"0" if it is the first slave. For each x that immediately
precedes the $slave, the column position is incremented by
one. Thus the x represents a blank column for this row in
the grid.
-columnspan => n
Insert the slave so that it occupies n columns in the grid.
The default is one column, unless the window name is
followed by a -, in which case the columnspan is
incremented once for each immediately following -.
-in => $other
Insert the slave(s) in the master window given by $other.
The default is the first slave's parent window.
-ipadx => amount
The amount specifies how much horizontal internal padding
to leave on each side of the slave(s). This is space is
added inside the slave(s) border. The amount must be a
valid screen distance, such as 2 or '.5c'. It defaults to
0.
-ipady => amount
The amount specifies how much vertical internal padding to
leave on on the top and bottom of the slave(s). This space
is added inside the slave(s) border. The amount defaults
to 0.
-padx => amount
The amount specifies how much horizontal external padding
to leave on each side of the slave(s), in screen units.
The amount defaults to 0. This space is added outside the
slave(s) border.
-pady => amount
The amount specifies how much vertical external padding to
leave on the top and bottom of the slave(s), in screen
units. The amount defaults to 0. This space is added
outside the slave(s) border.
-row => n
Insert the slave so that it occupies the nth row in the
grid. Row numbers start with 0. If this option is not
supplied, then the slave is arranged on the same row as the
previous slave specified on this call to grid, or the first
unoccupied row if this is the first slave.
-rowspan => n
Insert the slave so that it occupies n rows in the grid.
The default is one row. If the next grid method contains ^
characters instead of $slaves that line up with the columns
of this $slave, then the rowspan of this $slave is extended
by one.
-sticky => style
If a slave's cell is larger than its requested dimensions,
this option may be used to position (or stretch) the slave
within its cell. Style is a string that contains zero or
more of the characters n, s, e or w. The string can
optionally contain spaces or commas, but they are ignored.
Each letter refers to a side (north, south, east, or west)
that the slave will "stick" to. If both n and s (or e and
w) are specified, the slave will be stretched to fill the
entire height (or width) of its cavity. The sticky option
subsumes the combination of -anchor and -fill that is used
by pack. The default is '', which causes the slave to be
centered in its cavity, at its requested size.
$master->gridBbox(?column, row,? ?column2, row2?)
With no arguments, the bounding box (in pixels) of the grid is
returned. The return value consists of 4 integers. The first two
are the pixel offset from the master window (x then y) of the top-
left corner of the grid, and the second two integers are the width
and height of the grid, also in pixels. If a single column and row
is specified on the command line, then the bounding box for that
cell is returned, where the top left cell is numbered from zero.
If both column and row arguments are specified, then the bounding
box spanning the rows and columns indicated is returned.
$master->gridColumnconfigure(index?, -option=>value, ...?)
Query or set the column properties of the index column of the
geometry master, $master. The valid options are -minsize, -weight
and -pad. If one or more options are provided, then index may be
given as a list of column indices to which the configuration
options will operate on. The -minsize option sets the minimum
size, in screen units, that will be permitted for this column. The
-weight option (an integer value) sets the relative weight for
apportioning any extra spaces among columns. A weight of zero (0)
indicates the column will not deviate from its requested size. A
column whose weight is two will grow at twice the rate as a column
of weight one when extra space is allocated to the layout. The
-uniform option, when a non-empty value is supplied, places
the column in a uniform group with other columns that have the same
value for -uniform. The space for columns belonging to a uniform
group is allocated so that their sizes are always in strict
proportion to their -weight values. See THE GRID ALGORITHM
below for further details. The -pad option specifies the number of
screen units that will be added to the largest window contained
completely in that column when the grid geometry manager requests a
size from the containing window. If only an option is specified,
with no value, the current value of that option is returned. If
only the master window and index is specified, all the current
settings are returned in an list of "-option value" pairs.
$slave->gridConfigure(?$slave, ...?, options?)
The same as grid method.
$slave->gridForget?($slave, ...)?
Removes each of the $slaves from grid for its master and unmaps
their windows. The slaves will no longer be managed by the grid
geometry manager. The configuration options for that window are
forgotten, so that if the slave is managed once more by the grid
geometry manager, the initial default settings are used.
$slave->gridInfo
Returns a list whose elements are the current configuration state
of the slave given by $slave in the same option-value form that
might be specified to gridConfigure. The first two elements of the
list are ``-in=>$master'' where $master is the slave's master.
$master->gridLocation(x, y)
Given x and y values in screen units relative to the master
window, the column and row number at that x and y location is
returned. For locations that are above or to the left of the grid,
-1 is returned.
$master->gridPropagate?(boolean)?
If boolean has a true boolean value such as 1 or on then
propagation is enabled for $master, which must be a window name
(see "GEOMETRY PROPAGATION" below). If boolean has a false boolean
value then propagation is disabled for $master. In either of these
cases an empty string is returned. If boolean is omitted then the
method returns 0 or 1 to indicate whether propagation is currently
enabled for $master. Propagation is enabled by default.
$master->gridRowconfigure(index?, -option=>value, ...?)
Query or set the row properties of the index row of the geometry
master, $master. The valid options are -minsize, -weight and -pad.
If one or more options are provided, then index may be given as a
list of row indeces to which the configuration options will operate
on. The -minsize option sets the minimum size, in screen units,
that will be permitted for this row. The -weight option (an
integer value) sets the relative weight for apportioning any extra
spaces among rows. A weight of zero (0) indicates the row will not
deviate from its requested size. A row whose weight is two will
grow at twice the rate as a row of weight one when extra space is
allocated to the layout. The -uniform option, when a non-empty
value is supplied, places the row in a uniform group with other
rows that have the same value for -uniform. The space for rows
belonging to a uniform group is allocated so that their sizes are
always in strict proportion to their -weight values. See THE GRID
ALGORITHM below for further details. The -pad option specifies the
number of screen units that will be added to the largest window
contained completely in that row when the grid geometry manager
requests a size from the containing window. If only an option is
specified, with no value, the current value of that option is
returned. If only the master window and index is specified, all
the current settings are returned in an list of "option-value"
pairs.
$slave->gridRemove?($slave, ...)?
Removes each of the $slaves from grid for its master and unmaps
their windows. The slaves will no longer be managed by the grid
geometry manager. However, the configuration options for that
window are remembered, so that if the slave is managed once more by
the grid geometry manager, the previous values are retained.
$master->gridSize
Returns the size of the grid (in columns then rows) for $master.
The size is determined either by the $slave occupying the largest
row or column, or the largest column or row with a -minsize,
-weight, or -pad that is non-zero.
$master->gridSlaves?(-option=>value)?
If no options are supplied, a list of all of the slaves in $master
are returned, most recently manages first. -option can be either
-row or -column which causes only the slaves in the row (or column)
specified by value to be returned.
RELATIVE PLACEMENT
The grid method contains a limited set of capabilities that permit
layouts to be created without specifying the row and column information
for each slave. This permits slaves to be rearranged, added, or
removed without the need to explicitly specify row and column
information. When no column or row information is specified for a
$slave, default values are chosen for -column, -row, -columnspan and
-rowspan at the time the $slave is managed. The values are chosen based
upon the current layout of the grid, the position of the $slave
relative to other $slaves in the same grid method, and the presence of
the characters -, ^, and ^ in grid method where $slave names are
normally expected.
- This increases the columnspan of the $slave to the left. Several
-'s in a row will successively increase the columnspan. A - may not
follow a ^ or a x.
x This leaves an empty column between the $slave on the left and the
$slave on the right.
^ This extends the -rowspan of the $slave above the ^'s in the grid.
The number of ^'s in a row must match the number of columns spanned
by the $slave above it.
THE GRID ALGORITHM
The grid geometry manager lays out its slaves in three steps. In the
first step, the minimum size needed to fit all of the slaves is
computed, then (if propagation is turned on), a request is made of the
master window to become that size. In the second step, the requested
size is compared against the actual size of the master. If the sizes
are different, then space is added to or taken away from the layout as
needed. For the final step, each slave is positioned in its row(s) and
column(s) based on the setting of its sticky flag.
To compute the minimum size of a layout, the grid geometry manager
first looks at all slaves whose columnspan and rowspan values are one,
and computes the nominal size of each row or column to be either the
minsize for that row or column, or the sum of the padding plus the size
of the largest slave, whichever is greater. Then the slaves whose
rowspans or columnspans are greater than one are examined. If a group
of rows or columns need to be increased in size in order to accommodate
these slaves, then extra space is added to each row or column in the
group according to its weight. For each group whose weights are all
zero, the additional space is apportioned equally.
When multiple rows or columns belong to a uniform group, the space
allocated to them is always in proportion to their weights. (A weight
of zero is considered to be 1.) In other words, a row or column
configured with -weight 1 -uniform a will have exactly the same size as
any other row or column configured with -weight 1 -uniform a. A row or
column configured with -weight 2 -uniform b will be exactly twice as
large as one that is configured with -weight 1 -uniform b.
More technically, each row or column in the group will have a size
equal to k*weight for some constant k. The constant k is chosen so
that no row or column becomes smaller than its minimum size. For
example, if all rows or columns in a group have the same weight, then
each row or column will have the same size as the largest row or column
in the group.
For masters whose size is larger than the requested layout, the
additional space is apportioned according to the row and column
weights. If all of the weights are zero, the layout is centered within
its master. For masters whose size is smaller than the requested
layout, space is taken away from columns and rows according to their
weights. However, once a column or row shrinks to its minsize, its
weight is taken to be zero. If more space needs to be removed from a
layout than would be permitted, as when all the rows or columns are at
there minimum sizes, the layout is clipped on the bottom and right.
GEOMETRY PROPAGATION
The grid geometry manager normally computes how large a master must be
to just exactly meet the needs of its slaves, and it sets the requested
width and height of the master to these dimensions. This causes
geometry information to propagate up through a window hierarchy to a
top-level window so that the entire sub-tree sizes itself to fit the
needs of the leaf windows. However, the gridPropagate method may be
used to turn off propagation for one or more masters. If propagation
is disabled then grid will not set the requested width and height of
the master window. This may be useful if, for example, you wish for a
master window to have a fixed size that you specify.
RESTRICTIONS ON MASTER WINDOWS
The master for each slave must either be the slave's parent (the
default) or a descendant of the slave's parent. This restriction is
necessary to guarantee that the slave can be placed over any part of
its master that is visible without danger of the slave being clipped by
its parent. In addition, all slaves in one call to grid must have the
same master.
STACKING ORDER
If the master for a slave is not its parent then you must make sure
that the slave is higher in the stacking order than the master.
Otherwise the master will obscure the slave and it will appear as if
the slave hasn't been managed correctly. The easiest way to make sure
the slave is higher than the master is to create the master window
first: the most recently created window will be highest in the
stacking order.
CREDITS
The grid method is based on ideas taken from the GridBag geometry
manager written by Doug. Stein, and the blt_table geometry manager,
written by George Howlett.
SEE ALSO
Tk::form Tk::pack Tk::place
KEYWORDS
geometry manager, location, grid, cell, propagation, size, pack,
master, slave
POD ERRORS
Hey! The above document had some coding errors, which are explained
below:
Around line 15:
Unterminated S<...> sequence
Around line 17:
Unterminated S<...> sequence
perl v5.10.0 2007-05-05 grid(3)