SJIRELEM(8)SJIRELEM(8)NAME
sjirelem - test the SJI Jukebox Interface SJIRELEM command
SYNOPSIS
sjirelem devname
DESCRIPTION
The sjirelem program tests the SJIRELEM command on SJI compliant Juke‐
boxes (see libsji(8)). This command reads media presence and origin
data from a Jukebox.
Example output for this command:
Element Data for 0.2.1, Element Type DATA TRANSPORT:
Elem[001]: pres_val=1 med_pres=1 med_side=0
Origin: type STORAGE, address 5
Element Data for 0.2.1, Element Type STORAGE:
Elem[001]: pres_val=1 med_pres=1 med_side=0
Elem[002]: pres_val=1 med_pres=1 med_side=0
Elem[003]: pres_val=1 med_pres=1 med_side=0
Elem[004]: pres_val=1 med_pres=1 med_side=0
Elem[005]: pres_val=1 med_pres=0 med_side=0
Elem[006]: pres_val=1 med_pres=1 med_side=0
Elem[007]: pres_val=1 med_pres=1 med_side=0
Element Data for 0.2.1, Element Type MEDIA TRANSPORT:
Elem[001]: pres_val=1 med_pres=0 med_side=0
The devname argument should be any device name that can be used to
reach a SJI compliant Jukebox driven by the system. Typical usage is in
constructing the name that contains the SCSI Bus, the SCSI Target ID
and the SCSI Lun on that target, for example, scsidev@0.4.0.
The output is sorted by types available, and then by ascending order.
The boolean token med_pres states whether the Jukebox believes that
there is media present at this location.
The boolean token pres_val is a subtle and overloaded indicator that
states (if set to true, or 1), that the the token med_pres should be
believed absolutely. If pres_val is not true (set to zero), and
med_pres is true (set to one), it is probable that there is media at
that location, but that there is some exception associated with it. A
possible exception is that a tape has a missing, upside-down, or
unreadable bar code label. Also, a jukebox cannot determine whether
media that existed at one point (for example, prior to a power failure)
has been removed from a DATA TRANSPORT element (tape drive). If the
token pres_val is not true (set to zero), and med_pres is also not true
(set to zero), there probably isn't media in that location. This
uncertainty is eliminated the next time an INITIALIZE ELEMENT STATUS is
done (see sjiielm(8)).
The token med_size is for two sided media (e.g., optical disks), where
the Jukebox has kept track of which side is up.
When the Jukebox can, it might also say where the last place a piece of
media had been prior to its current location, in which case sjirelem
will print that out.
SEE ALSOlibsji(8)sjiielm(8)NetWorker 7.3.2 Aug 23, 06 SJIRELEM(8)