AMLABEL(8)AMLABEL(8)NAME
amlabel - label an Amanda tape
SYNOPSIS
amlabel [-f] config label [slot�slot]
DESCRIPTION
All Amanda tapes must be pre-labeled before they are used. Amanda ver‐
ifies the label in amdump and amflush before writing to make sure the
proper tape is loaded.
Amlabel writes an Amanda label on the tape in the device specified by
the amanda.conf file in /usr/local/etc/amanda/config. Label may be any
string that does not contain whitespace and that matches the
amanda.conflabelstr regular expression option. It is up to the system
administrator to define a naming convention.
Amlabel appends the new tape to the tapelist file so it will be used by
Amanda before it reuses any other tapes. When you amlabel multiple
tapes, they will be used in the order you amlabel them.
Amlabel will not write the label if the tape contains an active Amanda
tape or if the label specified is on an active tape. The -f (force)
flag bypasses these verifications.
An optional slot may be specified after the tape label. If a tape
changer is in use, amlabel will label the tape in the specified slot
instead of the currently loaded tape.
See the amanda(8) man page for more details about Amanda.
EXAMPLE
Write an Amanda label with the string "DMP000" on the tape loaded in
the device named in the tapedev option in
/usr/local/etc/amanda/daily/amanda.conf:
% amlabel daily DMP000
Label the tape in slot 3 of the currently configured tape changer with
the string "DMP003":
% amlabel daily DMP003 slot 3
MESSAGES
label label doesn't match labelstr str
Label label on the command line does not match the labelstr reg‐
ular expression str from amanda.conf.
label label already on a tape
Label label is already listed as an active Amanda tape.
no tpchanger specified in path , so slot command invalid
The command line has the slot parameter but the amanda.conf file
in path does not have a tape changer configured.
reading label label, tape is in another amanda configuration
This tape appears to be a valid Amanda tape, but label does not
match labelstr for this configuration so it is probably part of
a different Amanda configuration.
reading label label, tape is active
Tape label appears to already be part of this Amanda configura‐
tion and active, i.e. has valid data on it.
no label found, are you sure tape is non-rewinding?
While checking that the label was written correctly, amlabel got
an error that might be caused by mis-configuring Amanda with a
rewinding tape device name instead of a non-rewinding device
name for tape.
AUTHOR
James da Silva, <jds@amanda.org>: Original text
Stefan G. Weichinger, <sgw@amanda.org>, maintainer of the Amanda-docu‐
mentation: XML-conversion
SEE ALSOamanda(8)amdump(8)amflush(8)AMLABEL(8)
