PST(4) BSD Kernel Interfaces Manual PST(4)NAME
pst — Device driver for Promise Supertrak SX6000
SYNOPSIS
Include this line in the kernel config file:
device pst
DESCRIPTION
This driver is for the Promise Supertrak SX6000 ATA hardware RAID con‐
troller. It supports (in hardware) RAID levels 0, 1, 0+1, 3, 5 and JBOD
on up to 6 ATA disk drives, including automatic rebuild and hotswap, and
supports signalling disk status on LED's on Promise Superswap disk enclo‐
sures. The Supertrak lines of controllers does not support non-disk
devices.
NOTES
The pst driver does not support manipulating the RAID from the OS, RAID's
need to be setup from the onboard BIOS. However hot swap, hot spare, and
automatic rebuilds are supported without reboot.
HISTORY
The pst driver first appeared in FreeBSD 4.7.
AUTHORS
The pst driver and man page was written by Søren Schmidt
⟨sos@FreeBSD.org⟩.
BSD November 21, 2001 BSD