VBETOOL(1) User Commands VBETOOL(1)NAME
vbetool - run real-mode video BIOS code to alter hardware state
SYNOPSIS
vbetool [[vbestate save|restore]|[vbemode set|get]|[vgamode]|[dpms
on|off|standby|suspend|reduced]|[post [romfile]]|[vgastate
on|off]|[vbefp panelid|panelsize|getbrightness|setbrightness|invert]]
DESCRIPTION
vbetool uses lrmi in order to run code from the video BIOS. Currently,
it is able to alter DPMS states, save/restore video card state and
attempt to initialize the video card from scratch.
OPTIONS
vbetool takes the following options:
vbestate
vbetool will use the VESA 0x4f0f extensions to save or restore
hardware state. This will be sent to or read from stdin. This
information is highly hardware specific - do not attempt to
restore state saved from a different machine. This command will
not work unless you are at a text console, as it interferes
badly with X.
dpms vbetool will use the VESA 0x4f10 extensions to alter the power
management state of your screen. "On", "off", "standby", "sus‐
pend" and "reduced" are acceptable further options and determine
which state will be activated.
vbemode
vbetool will get or set the current VESA mode. "get" will return
the current mode number on stdout - "set" will set the mode to
the next argument.
vgamode
vbetool will set the legacy VGA mode to the following numeric
argument.
post vbetool will attempt to run BIOS code located at c000:0003. This
is the code run by the system BIOS at boot in order to intialise
the video hardware. Note that on some machines (especially lap‐
tops), not all of this code is present after system boot - as a
result, executing this command may result in undefined behav‐
iour. This command must be run from a text console, as it will
otherwise interfere with the operation of X. This command takes
an optional argument which is the location of a file containing
a ROM image. If provided, this image will be mapped to the c000
segment and used instead of the system's video BIOS.
vgastate
vbetool will enable or disable the current video card. On most
hardware, disabling will cause the hardware to stop responding
until it is reenabled. You probably don't want to do this if
you're using a framebuffer.
vbefp vbetool will execute a VESA flat panel interface call.
panelid will provide information about the panel
panelsize will provide the size of the panel
getbrightness will provide the current screen brightness as an
integer
setbrightness accepts an integer as an argument and will set the
screen brightness to that
invert will invert the colours of the screen
BUGS
Switching dpms modes may interact badly with X on some systems.
The vbestate command may behave in strange ways.
The post command may result in the execution of arbitrary code that
happens to be lying around in the area where chunks of your video BIOS
used to be.
The VESA specification does not require that "vbemode get" provides the
correct mode if the current mode was set via some means other than the
VESA BIOS extensions.
The VESA flat panel interface ceased development at the proposal stage.
panelid and panelsize will work on many machines, but the other argu‐
ments are unlikely to be implemented on available hardware.
AUTHOR
vbetool was written by Matthew Garrett <mjg59@srcf.ucam.org>, based on
code from read-edid by John Fremlin <john@fremlin.de>, LRMI
(http://sourceforge.net/projects/lrmi/) and XFree
(http://www.xfree86.org). It is released under the terms of the GNU
General Public License.
vbetool 0.2 31 December 2004 VBETOOL(1)
