LDAPLIST(1)LDAPLIST(1)NAMEldaplist - search and list naming information from an LDAP directory
using the configured profile
SYNOPSIS
/usr/bin/ldaplist [-dlv] [-h LDAP_server[:serverPort] [-M domainName]
[-N profileName] [-a authenticationMethod] [-P certifPath]
[-D bindDN] [-w bindPassword] [-j passwdFile]]
[database [key]...]
/usr/bin/ldaplist -g
/usr/bin/ldaplist -h
DESCRIPTION
If the -h LDAP_server[:serverPort] option is specified, ldaplist estab‐
lishes a connection to the server pointed to by the option to obtain a
DUAProfile specified by the -N option. Then ldaplist lists the informa‐
tion from the directory described by the configuration obtained.
By default (if the -h LDAP_server[:serverPort] option is not speci‐
fied), the utility searches for and lists the naming information from
the LDAP directory service defined in the LDAP configuration files gen‐
erated byldapclient(1M) during the client initialization phase. To use
the utility in the default mode, the Solaris LDAP client must be set up
in advance.
The database is either a container name or a database name as defined
in nsswitch.conf(4). A container is a non-leaf entry in the Directory
Information Tree (DIT) that contains naming service information. The
container name is the LDAP Relative Distinguished Name (RDN) of the
container relative to the defaultSearchBase as defined in the configu‐
ration files. For example, for a container named ou=people, the data‐
base name is the database specified in nsswitch.conf. This database is
mapped to a container, for example, passwd maps to ou=people. If an
invalid database is specified, it is mapped to a generic container, for
example, nisMapName=name).
The key is the attribute value to be searched in the database. You can
specify more than one key to be searched in the same database. The key
can be specified in either of two forms: attribute=value or value. In
the first case, ldaplist passes the search key to the server. In the
latter case, an attribute is assigned depending on how the database is
specified. If the database is a container name, then the "cn" attribute
type is used. If the database is a valid database name as defined in
the nsswitch.conf, then a predefined attribute type is used (see table
below). If the database is an invalid database name, then cn is used as
the attribute type.
The ldaplist utility relies on the Schema defined in the RFC 2307bis,
currently an IETF draft. The data stored on the LDAP server must be
stored based on this Schema, unless the profile contains schema mapping
definitions. For more information on schema mapping see ldapclient(1M).
The following table lists the default mapping from the database names
to the container, the LDAP object class, and the attribute type used if
not defined in the key.
Database Object Class Attribute Type Container
aliases mailGroup cn ou=Aliases
automount nisObject cn automountMapName=auto_*
bootparams bootableDevice cn ou=Ethers
ethers ieee802Device cn ou=Ethers
group posixgroup cn ou=Group
hosts ipHost cn ou=Hosts
ipnodes ipHost cn ou=Hosts
netgroup ipNetgroup cn ou=Netgroup
netmasks ipNetwork ipnetworknumber ou=Networks
networks ipNetwork ipnetworknumber ou=Networks
passwd posixAccount uid ou=People
protocols ipProtocol cn ou=Protocols
publickey nisKeyObject uidnumber ou=People
cn ou=Hosts
rpc oncRpc cn ou=Rpc
services ipService cn ou=Services
printers printerService printer-uri ou=printers
auth_attr SolarisAuthAttr nameT ou=SolarisAuthAttr
prof_attr SolarisProfAttr nameT ou=SolarisProfAttr
exec_attr SolarisExecAttr nameT ou=SolarisProfAttr
user_attr SolarisUserAttr uidT ou=people
audit_user SolarisAuditUser uidT ou=people
projects SolarisProject SolarisProjectID ou=projects
The following databases are available only if the system is configured
with Trusted Extensions:
tnrhtp ipTnetTemplate ipTnetTemplateName ou=ipTnet
tnrhdb ipTnetHost ipTnetNumber ou=ipTnet
o For the automount database, auto_*, in the container column,
represents auto_home, auto_direct, ...
o For the publickey database, if the key starts with a digit,
it is interpreted as an uid number. If the key starts with a
non-digit, it is interpreted as a host name.
The ldaplist utility supports substring search by using the wildcard
"*" in the key. For example, "my*" matches any strings that starts with
"my". In some shell environments, keys containing the wildcard might
need to be quoted.
If the key is not specified, all the containers in the current search
baseDN is listed.
OPTIONS
The following options are supported:
-a authenticationMethod
Specifies the authentication method. The default value is what has
been configured in the profile. The supported authentication meth‐
ods are:
simple
sasl/CRAM-MD5
sasl/DIGEST-MD5
tls:simple
tls:sasl/CRAM-MD5
tls:sasl/DIGEST-MD5
Selecting simple causes passwords to be sent over the network in
clear text. Its use is strongly discouraged.
Additionally, if the client is configured with a profile which uses
no authentication, that is, either the credentialLevel attribute is
set to anonymous or authenticationMethod is set to none, the user
must use this option to provide an authentication method.
-d
Lists the attributes for the specified database, rather than the
entries. By default, the entries are listed.
-D bindDN
Specifies an entry which has read permission to the requested data‐
base.
-g
Lists the database mapping.
-h
Lists the database mapping.
This option has been deprecated.
-h LDAP_server[:serverPort]
Specifies an address (or a name) and a port of the LDAP server from
which the entries are read. The current naming service specified in
the nsswitch.conf file is used. The default value for the port is
389, unless when TLS is specified in the authentication method. In
this case, the default LDAP server port number is 636.
-j passwdFile
Specifies a file containing the password for the bind DN or the
password for the SSL client's key database. To protect the pass‐
word, use this option in scripts and place the password in a secure
file.
This option is mutually exclusive of the -w option.
-l
Lists all the attributes for each entry matching the search crite‐
ria. By default, ldaplist lists only the Distinguished Name of the
entries found.
-M domainName
Specifies the name of a domain served by the specified server. If
this option is not specified, the default domain name is used.
-N profileName
Specifies a DUAProfile name. A profile with such a name is supposed
to exist on the server specified by -H option. The default value is
default.
-p certifPath
Specifies the certificate path to the location of the certificate
database. The value is the path where security database files
reside. This is used for TLS support, which is specified in the
authenticationMethod and serviceAuthenticationMethod attributes.
The default is /var/ldap.
-w bindPassword
Password to be used for authenticating the bindDN. If this parame‐
ter is missing, the command prompts for a password. NULL passwords
are not supported in LDAP.
When you use -w bind_password to specify the password to be used
for authentication, the password is visible to other users of the
system by means of the ps command, in script files or in shell his‐
tory.
If the value of - is supplied as a password, the command prompts
for a password.
-v
Sets verbose mode. The ldaplist utility also prints the filter used
to search for the entry. The filter is prefixed with "+++".
EXAMPLES
Example 1 Listing All Entries in the Hosts Database
The following example lists all entries in the hosts database:
example% ldaplist hosts
Example 2 Listing All Entries in a Non-Standard Database ou=new
The following example lists all entries in a non-standard database:
example% ldaplist ou=new
Example 3 Finding user1 in the passwd Database
The following example finds user1 in the passwd database:
example% ldaplist passwd user1
Example 4 Finding the Entry With Service Port of 4045 in the services
Database
The following example finds the entry with the service port of 4045 in
the services database:
example% ldaplist services ipServicePort=4045
Example 5 Finding All Users With Username Starting with new in the
passwd Database
The following example finds all users with the username starting with
new in the passwd database:
example% ldaplist passwd 'new*'
Example 6 Listing the Attributes for the hosts Database
The following example lists the attributes for the hosts database:
example% ldaplist-d hosts
Example 7 Finding user1 in the passwd Database
The following example finds user1 in the passwd database. An LDAP
server is specified explicitly.
example% ldaplist-H 10.10.10.10:3890 \
-M another.domain.name -N special_duaprofile \
-D "cn=directory manager" -w secret \
user1
EXIT STATUS
The following exit values are returned:
0
Successfully matched some entries.
1
Successfully searched the table and no matches were found.
2
An error occurred. An error message is output.
FILES
/var/ldap/ldap_client_file
/var/ldap/ldap_client_cred
Files that contain the LDAP configuration
of the client. Do not manually modify
these files. Their content is not guaran‐
teed to be human readable. To update
these files, use ldapclient(1M)ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌────────────────────┬─────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├────────────────────┼─────────────────┤
│Interface Stability │ Committed │
└────────────────────┴─────────────────┘
SEE ALSOldap(1), ldapadd(1), ldapdelete(1), ldapmodify(1), ldapmodrdn(1),
ldapsearch(1), idsconfig(1M), ldap_cachemgr(1M), ldapaddent(1M), ldap‐
client(1M), suninstall(1M), resolv.conf(4), attributes(5)NOTES
RFC 2307bis is an IETF informational document in draft stage that
defines an approach for using LDAP as a naming service.
Currently StartTLS is not supported by libldap.so.5, therefore the port
number provided refers to the port used during a TLS open, versus the
port used as part of a StartTLS sequence. For example, -h foo:1000 -a
tls:simple, refers to a raw TLS open on host foo, port 1000, not a
open, StartTLS sequence on an unsecured port 1000. If port 1000 is
unsecured the connection is not made.
Jun 7, 2008 LDAPLIST(1)