NUT-SCANNER(8) NUT Manual NUT-SCANNER(8)NAME
nut-scanner - scan communication buses for NUT devices
SYNOPSIS
nut-scanner -h
nut-scanner [OPTIONS]
DESCRIPTION
nut-scanner scans available communication buses and display any NUT
compatible device it has found.
OPTIONS-h
Display the help text.
DISPLAY OPTIONS-N | --disp_nut_conf
Display result in the ups.conf format.
-P | --disp_parsable
Display result in a parsable format.
BUS OPTIONS-C | --complete_scan
Scan all available communication buses (default behavior)
-U | --usb_scan
List all NUT compatible USB devices currently plugged in.
-S | --snmp_scan
Scan SNMP devices. Require at least a start IP, and optionnaly an
end IP. See specific SNMP OPTIONS for community and security
settings.
-M | --xml_scan
Scan XML/HTTP devices. Broadcast a network message on the current
network interfaces to retrieve XML/HTTP capable devices. No IP
required.
-O | --oldnut_scan
Scan NUT devices (i.e. upsd daemon) on IP ranging from start IP to
end IP.
-A | --avahi_scan
Scan NUT servers using avahi request on the current network
interfaces. No IP required.
-I | --ipmi_scan
Scan NUT compatible devices available via IPMI on the current host.
NETWORK OPTIONS-t | --timeout timeout
Set the network timeout in seconds. Default timeout is 5 seconds.
-s | --start_ip start IP
Set the first IP (IPv4 or IPv6) when a range of IP is required
(SNMP, old_nut).
-e | --end_ip end IP
Set the last IP (IPv4 or IPv6) when a range of IP is required
(SNMP, old_nut). If this parameter is omitted, only the start IP is
scanned. If end IP is lesser than start IP, both parameter are
internally permuted.
NUT DEVICE OPTION-p | --port <port number port number
Set the port number of scanned NUT devices (default 3493).
SNMP V1 OPTION-c | --community community
Set SNMP v1 community name (default = public).
SNMP V3 OPTIONS-l | --secLevel security level
Set the security level used for SNMPv3 messages. Allowed values
are: noAuthNoPriv, authNoPriv and authPriv.
-u | --secName security name
Set the security name used for authenticated SNMPv3 messages. This
parameter is mandatory if you set security level.
-a | --authProtocol authentication protocol
Set the authentication protocol used for authenticated SNMPv3
messages. Allowed values are MD5 or SHA. Default value is MD5.
-A | --authPassword authentication pass phrase
Set the authentication pass phrase used for authenticated SNMPv3
messages. This parameter is mandatory if you set security level to
authNoPriv or authPriv.
-x | --privProtocol privacy protocol
Set the privacy protocol used for encrypted SNMPv3 messages.
Allowed values are DES or AES. Default value is DES.
-X | --privPassword privacy pass phrase
Set the privacy pass phrase used for encrypted SNMPv3 messages.
This parameter is mandatory if you set security level to authPriv.
SEE ALSOups.conf(5)INTERNET RESOURCES
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 09/15/2011 NUT-SCANNER(8)