Getopt::Euclid(3) User Contributed Perl Documentation Getopt::Euclid(3)NAMEGetopt::Euclid - Executable Uniform Command-Line Interface Descriptions
VERSION
This document describes Getopt::Euclid version 0.2.3
SYNOPSIS
use Getopt::Euclid;
if ($ARGV{-i}) {
print "Interactive mode...\n";
}
for my $x (0..$ARGV{-size}{h}-1) {
for my $y (0..$ARGV{-size}{w}-1) {
do_something_with($x, $y);
}
}
__END__
=head1 NAME
yourprog - Your program here
=head1 VERSION
This documentation refers to yourprog version 1.9.4
=head1 USAGE
yourprog [options] -s[ize]=<h>x<w> -o[ut][file] <file>
=head1 REQUIRED ARGUMENTS
=over
=item -s[ize]=<h>x<w>
Specify size of simulation
=for Euclid:
h.type: int > 0
h.default: 24
w.type: int >= 10
w.default: 80
=item -o[ut][file] <file>
Specify output file
=for Euclid:
file.type: writable
file.default: '-'
=back
=head1 OPTIONS
=over
=item -i
Specify interactive simulation
=item -l[[en][gth]] <l>
Length of simulation [default: 99]
=for Euclid:
l.type: int > 0
l.default: 99
=item --version
=item --usage
=item --help
=item --man
Print the usual program information
=back
Remainder of documentation starts here...
=head1 AUTHOR
Damian Conway (DCONWAY@CPAN.org)
=head1 BUGS
There are undoubtedly serious bugs lurking somewhere in this code.
Bug reports and other feedback are most welcome.
=head1 COPYRIGHT
Copyright (c) 2005, Damian Conway. All Rights Reserved.
This module is free software. It may be used, redistributed
and/or modified under the terms of the Perl Artistic License
(see http://www.perl.com/perl/misc/Artistic.html)
DESCRIPTIONGetopt::Euclid uses your program's own documentation to create a
command-line argument parser. This ensures that your program's
documented interface and its actual interface always agree.
To use the module, you simply write:
use Getopt::Euclid;
at the top of your program. This will cause Getopt::Euclid to be
required and its import method will be called. It is important that the
import method be allowed to run, so do not invoke Getopt::Euclid in the
following manner:
# Will not work
use Getopt::Euclid ();
When the module is loaded within a regular Perl program, it will:
1. locate any POD in the same file,
2. extract information from that POD, most especially from the "=head1
REQUIRED ARGUMENTS" and "=head1 OPTIONS" sections,
3. build a parser that parses the arguments and options the POD
specifies,
4. remove the command-line arguments from @ARGV and parse them, and
5. put the results in the global %ARGV variable (or into specifically
named optional variables, if you request that -- see "Exporting
Option Variables").
As a special case, if the module is loaded within some other module
(i.e. from within a ".pm" file), it still locates and extracts POD
information, but instead of parsing @ARGV immediately, it caches that
information and installs an "import()" subroutine in the caller module.
That new "import()" acts just like Getopt::Euclid's own import, except
that it adds the POD from the caller module to the POD of the callee.
All of which just means you can put some or all of your CLI
specification in a module, rather than in the application's source
file. See "Module Interface" for more details.
INTERFACE
Program Interface
You write:
use Getopt::Euclid;
and your command-line is parsed automagically.
Module Interface
You write:
use Getopt::Euclid;
and your module will then act just like Getopt::Euclid (i.e. you can
use your module instead of Getopt::Euclid>, except that your module's
POD will also be prepended to the POD of any module that loads yours.
In other words, you can use Getopt::Euclid in a module to create a
standard set of CLI arguments, which can then be added to any
application simply by loading your module.
To accomplish this trick Getopt::Euclid installs an "import()"
subroutine in your module. If your module already has an "import()"
subroutine defined, terrible things happen. So don't do that.
You may also short-circuit the import method within your calling
program to have the POD from several modules included for argument
parsing.
use Module1::Getopt (); # No argument parsing
use Module2::Getopt (); # No argument parsing
use Getopt::Euclid; # Arguments parsed
POD Interface
This is where all the action is.
When Getopt::Euclid is loaded in a non-".pm" file, it searches that
file for the following POD documentation:
=head1 NAME
Getopt::Euclid ignores the name specified here. In fact, if you use
the standard "--help", "--usage", "--man", or "--version" arguments
(see "Standard arguments"), the module replaces the name specified
in this POD section with the actual name by which the program was
invoked (i.e. with $0).
=head1 USAGE
Getopt::Euclid ignores the usage line specified here. If you use
the standard "--help", "--usage", or "--man" arguments, the module
replaces the usage line specified in this POD section with a usage
line that reflects the actual interface that the module has
constructed.
=head1 VERSION
Getopt::Euclid extracts the current version number from this POD
section. To do that it simply takes the first substring that
matches <digit>.<digit> or <digit>_<digit>. It also accepts one or
more additional trailing .<digit> or _<digit>, allowing for multi-
level and "alpha" version numbers such as:
=head1 VERSION
This is version 1.2.3
or:
=head1 VERSION
This is alpha release 1.2_34
You may also specify the version number in your code. However, in
order for Getopt::Euclid to properly read it, it must be in a
"BEGIN" block:
BEGIN { use version; our $VERSION = qv('1.2.3') }
use Getopt::Euclid;
Euclid stores the version as $Getopt::Euclid::SCRIPT_VERSION.
=head1 REQUIRED ARGUMENTS
Getopt::Euclid uses the specifications in this POD section to build
a parser for command-line arguments. That parser requires that
every one of the specified arguments is present in any command-line
invocation. See "Specifying arguments" for details of the
specification syntax.
The actual headings that Getopt::Euclid can recognize here are:
=head1 [STD|STANDARD] REQUIRED [ARG|ARGUMENT][S]
=head1 OPTIONS
Getopt::Euclid uses the specifications in this POD section to build
a parser for command-line arguments. That parser does not require
that any of the specified arguments is actually present in a
command-line invocation. Again, see "Specifying arguments" for
details of the specification syntax.
Typically a program will specify both "REQUIRED ARGUMENTS" and
"OPTIONS", but there is no requirement that it supply both, or
either.
The actual headings that Getopt::Euclid recognizes here are:
=head1 [STD|STANDARD] OPTION[AL|S] [ARG|ARGUMENT][S]
=head1 COPYRIGHT
Getopt::Euclid prints this section whenever the standard
"--version" option is specified on the command-line.
The actual heading that Getopt::Euclid recognizes here is any
heading containing any of the words "COPYRIGHT", "LICENCE", or
"LICENSE".
Specifying arguments
Each required or optional argument is specified in the POD in the
following format:
=item ARGUMENT_STRUCTURE
ARGUMENT_DESCRIPTION
=for Euclid:
ARGUMENT_OPTIONS
PLACEHOLDER_CONSTRAINTS
Argument structure
· Each argument is specified as an "=item".
· Any part(s) of the specification that appear in square brackets are
treated as optional.
· Any parts that appear in angle brackets are placeholders for actual
values that must be specified on the command-line.
· Any placeholder that is immediately followed by "..." may be
repeated as many times as desired.
· Any whitespace in the structure specifies that any amount of
whitespace (including none) is allowed at the same position on the
command-line.
· A vertical bar indicates the start of an alternative variant of the
argument.
For example, the argument specification:
=item -i[n] [=] <file> | --from <file>
indicates that any of the following may appear on the command-line:
-idata.txt-i data.txt -i=data.txt -i = data.txt
-indata.txt-in data.txt -in=data.txt -in = data.txt
--from data.text
as well as any other combination of whitespacing.
Any of the above variations would cause all three of:
$ARGV{'-i'}
$ARGV{'-in'}
$ARGV{'--from'}
to be set to the string 'data.txt'.
You could allow the optional "=" to also be an optional colon by
specifying:
=item -i[n] [=|:] <file>
Optional components may also be nested, so you could write:
=item -i[n[put]] [=] <file>
which would allow "-i", "-in", and "-input" as synonyms for this
argument and would set all three of $ARGV{'-i'}, $ARGV{'-in'}, and
$ARGV{'-input'} to the supplied file name.
The point of setting every possible variant within %ARGV is that this
allows you to use a single key (say $ARGV{'-input'}, regardless of how
the argument is actually specified on the command-line.
Repeatable arguments
Normally Getopt::Euclid only accepts each specified argument once, the
first time it appears in @ARGV. However, you can specify that an
argument may appear more than once, using the "repeatable" option:
=item file=<filename>
=for Euclid:
repeatable
When an argument is marked repeatable the corresponding entry of %ARGV
will not contain a single value, but rather an array reference. If the
argument also has "Multiple placeholders", then the corresponding entry
in %ARGV will be an array reference with each array entry being a hash
reference.
Boolean arguments
If an argument has no placeholders it is treated as a boolean switch
and it's entry in %ARGV will be true if the argument appeared in @ARGV.
For a boolean argument, you can also specify variations that are false,
if they appear. For example, a common idiom is:
=item --print
Print results
=item --noprint
Don't print results
These two arguments are effectively the same argument, just with
opposite boolean values. However, as specified above, only one of
$ARGV{'--print'} and $ARGV{'--noprint'} will be set.
As an alternative you can specify a single argument that accepts either
value and sets both appropriately:
=item --[no]print
[Don't] print results
=for Euclid:
false: --noprint
With this specification, if "--print" appears in @ARGV, then
$ARGV{'--print'} will be true and $ARGV{'--noprint'} will be false. On
the other hand, if "--noprint" appears in @ARGV, then $ARGV{'--print'}
will be false and $ARGV{'--noprint'} will be true.
The specified false values can follow any convention you wish:
=item [+|-]print
=for Euclid:
false: -print
or:
=item -report[_no[t]]
=for Euclid:
false: -report_no[t]
et cetera.
Multiple placeholders
An argument can have two or more placeholders:
=item -size <h> <w>
The corresponding command line argument would then have to provide two
values:
-size 24 80
Multiple placeholders can optionally be separated by literal characters
(which must then appear on the command-line). For example:
=item -size <h>x<w>
would then require a command-line of the form:
-size 24x80
If an argument has two or more placeholders, the corresponding entry in
%ARGV becomes a hash reference, with each of the placeholder names as
one key. That is, the above command-line would set both
$ARGV{'-size'}{'h'} and $ARGV{'-size'}{'w'}.
Optional placeholders
Placeholders can be specified as optional as well:
=item -size <h> [<w>]
This specification then allows either:
-size 24
or:
-size 24 80
on the command-line. If the second placeholder value is not provided,
the corresponding $ARGV{'-size'}{'w'} entry is set to "undef". See also
"Placeholder defaults".
Unflagged placeholders
If an argument consists of a single placeholder with no "flag" marking
it:
=item <filename>
then the corresponding entry in %ARG will have a key the same as the
placeholder (including the surrounding angle brackets):
if ($ARGV{'<filename>'} eq '-') {
$fh = \*STDIN;
}
The same is true for any more-complicated arguments that begin with a
placeholder:
=item <h> [x <w>]
The only difference in the more-complex cases is that, if the argument
has any additional placeholders, the entire entry in %ARGV becomes a
hash:
my $total_size
= $ARGV{'<h>'}{'h'} * $ARGV{'<h>'}{'w'}
Note that, as in earlier multi-placeholder examples, the individual
second- level placeholder keys don't retain their angle-brackets.
Repeated placeholders
Any placeholder that is immediately followed by "...", like so:
=item -lib <files>...
=item <offsets>...
=for Euclid:
offsets.type: integer > 0
will match as many times as possible, but at least once. Note that this
implies that an unconstrained repeated unflagged placeholder (see
"Placeholder constraints" and "Unflagged placeholders") will consume
the rest of the command-line, and so should be specified last in the
POD.
If a placeholder is repeated, the corresponding entry in %ARGV will
then be an array reference, with each individual placeholder match in a
separate element. For example:
for my $lib (@{ $ARGV{'-lib'} }) {
add_lib($lib);
}
warn "First offset is: $ARGV{'<offsets>'}[0]";
my $first_offset = shift @{ $ARGV{'<offsets>'} };
Placeholder constraints
You can specify that the value provided for a particular placeholder
must satisfy a particular set of restrictions by using a "=for Euclid"
block. For example:
=item -size <h>x<w>
=for Euclid:
h.type: integer
w.type: integer
specifies that both the "<h>" and "<w>" must be given integers. You
can also specify an operator expression after the type name:
=for Euclid:
h.type: integer > 0
w.type: number <= 100
specifies that "<h>" has to be given an integer that's greater than
zero, and that "<w>" has to be given a number (not necessarily an
integer) that's no more than 100.
These type constraints have two alternative syntaxes:
PLACEHOLDER.type: TYPE BINARY_OPERATOR EXPRESSION
as shown above, and the more general:
PLACEHOLDER.type: TYPE [, EXPRESSION_INVOLVING(PLACEHOLDER)]
Using the second syntax, you could write the previous constraints as:
=for Euclid:
h.type: integer, h > 0
w.type: number, w <= 100
In other words, the first syntax is just sugar for the most common case
of the second syntax. The expression can be as complex as you wish and
can refer to the placeholder as many times as necessary:
=for Euclid:
h.type: integer, h > 0 && h < 100
w.type: number, Math::is_prime(w) || w % 2 == 0
Note that the expressions are evaluated in the "package main"
namespace, so it's important to qualify any subroutines that are not in
that namespace. Furthermore, any subroutines used must be defined (or
loaded from a module) before the "use Getopt::Euclid" statement.
Standard placeholder types
Getopt::Euclid recognizes the following standard placeholder types:
Name Placeholder value... Synonyms
============ ==================== ================
integer ...must be an integer int i
+integer ...must be a positive +int +i
integer
(same as: integer > 0)
0+integer ...must be a positive 0+int 0+i
integer or zero
(same as: integer >= 0)
number ...must be an number num n
+number ...must be a positive +num +n
number
(same as: number > 0)
0+number ...must be a positive 0+num 0+n
number or zero
(same as: number >= 0)
string ...may be any string str s
(default type)
readable ...must be the name input in
of a readable file
writeable ...must be the name writable output out
of a writeable file
(or of a non-existent
file in a writeable
directory)
/<regex>/ ...must be a string
matching the specified
pattern
Placeholder type errors
If a command-line argument's placeholder value doesn't satisify the
specified type, an error message is automatically generated. However,
you can provide your own message instead, using the ".type.error"
specifier:
=for Euclid:
h.type: integer, h > 0 && h < 100
h.type.error: <h> must be between 0 and 100 (not h)
w.type: number, Math::is_prime(w) || w % 2 == 0
w.type.error: Can't use w for <w> (must be an even prime number)
Whenever an explicit error message is provided, any occurrence within
the message of the placeholder's unbracketed name is replaced by the
placeholder's value (just as in the type test itself).
Placeholder defaults
You can also specify a default value for any placeholders that aren't
given values on the command-line (either because their argument isn't
provided at all, or because the placeholder is optional within the
argument).
For example:
=item -size <h>[x<w>]
Set the size of the simulation
=for Euclid:
h.default: 24
w.default: 80
This ensures that if no "<w>" value is supplied:
-size 20
then $ARGV{'-size'}{'w'} is set to 80.
Likewise, of the "-size" argument is omitted entirely, both
$ARGV{'-size'}{'h'} and $ARGV{'-size'}{'w'} are set to their respective
default values.
The default value can be any valid Perl compile-time expression:
=item -pi=<pi value>
=for Euclid:
pi value.default: atan2(0,-1)
Argument cuddling
Getopt::Euclid allows any "flag" argument to be "cuddled". A flag
argument consists of a single non- alphanumeric character, followed by
a single alpha-numeric character:
=item -v
=item -x
=item +1
=item =z
Cuddling means that two or more such arguments can be concatenated
after a single common non-alphanumeric. For example:
-vx
Note, however, that only flags with the same leading non-alphanumeric
can be cuddled together. Getopt::Euclid would not allow:
-vxz
That's because cuddling is recognized by progressively removing the
second character of the cuddle. In other words:
-vxz
becomes:
-v -xz
which becomes:
-v -x z
which will fail, unless a "z" argument has also been specified.
On the other hand, if the argument:
=item -e <cmd>
had been specified, the module would accept:
-vxe'print time'
as a cuddled version of:
-v -x -e'print time'
Exporting Option Variables
By default, the module only stores arguments into the global %ARGV
hash. You can request that options are exported as variables into the
calling package the special ':vars' specifier:
use Getopt::Euclid qw( :vars );
That is, if your program accepts the following arguments:
-v
--mode <modename>
<infile>
<outfile>
--auto-fudge <factor> (repeatable)
--also <a>...
--size <w>x<h>
Then these variables will be exported
$ARGV_v
$ARGV_mode
$ARGV_infile
$ARGV_outfile
@ARGV_auto_fudge
@ARGV_also
%ARGV_size # With entries $ARGV_size{w} and $ARGV_size{h}
For options that have multiple variants, only the longest variant is
exported.
The type of variable exported (scalar, hash, or array) is determined by
the type of the corresponding value in %ARGV. Command-line flags and
arguments that take single values will produce scalars, arguments that
take multiple values will produce hashes, and repeatable arguments will
produce arrays.
If you don't like the default prefix of "ARGV_", you can specify your
own, such as "opt_", like this:
use Getopt::Euclid qw( :vars<opt_> );
The major advantage of using exported variables is that any misspelling
of argument variables in your code will be caught at compile-time by
"use strict".
Standard arguments
Getopt::Euclid automatically provides four standard arguments to any
program that uses the module. The behaviours of these arguments are
"hard- wired" and cannot be changed, not even by defining your own
arguments of the same name.
The standard arguments are:
--usage
This argument cause the program to print a short usage summary and
exit.
--help
This argument cause the program to print a longer usage summary
(including a full list of required and optional arguments) and
exit.
--man
This argument cause the program to print the complete POD
documentation for the program and exit. If the standard output
stream is connected to a terminal and the POD::Text module is
available, the POD is formatted before printing. If the IO::Page or
IO::Pager::Page module is available, the formatted documentation is
then paged.
If standard output is not connected to a terminal or POD::Text is
not available, the POD is not formatted.
--version
This argument causes the program to print the version number of the
program (as specified in the "=head1 VERSION" section of the POD)
and any copyright information (as specified in the "=head1
COPYRIGHT" POD section) and then exit.
Minimalist keys
By default, the keys of %ARGV will match the program's interface
exactly. That is, if your program accepts the following arguments:
-v
--mode <modename>
<infile>
<outfile>
--auto-fudge
Then the keys that appear in %ARGV will be:
'-v'
'--mode'
'<infile>'
'<outfile>'
'--auto-fudge'
In some cases, however, it may be preferable to have Getopt::Euclid set
up those hash keys without "decorations". That is, to have the keys of
%ARGV be simply:
'v'
'mode'
'infile'
'outfile'
'auto_fudge'
You can arrange this by loading the module with the special
':minimal_keys' specifier:
use Getopt::Euclid qw( :minimal_keys );
Note that, in rare cases, using this mode may cause you to lose data
(for example, if the interface specifies both a "--step" and a "<step>"
option). The module throws an exception if this happens.
DIAGNOSTICS
Compile-time diagnostics
The following diagnostics are mainly caused by problems in the POD
specification of the command-line interface:
Getopt::Euclid was unable to access POD
Something is horribly wrong. Getopt::Euclid was unable to read your
program to extract the POD from it. Check your program's
permissions, though it's a mystery how perl was able to run the
program in the first place, if it's not readable.
.pm file cannot define an explicit import() when using Getopt::Euclid
You tried to define an "import()" subroutine in a module that was
also using Getopt::Euclid. Since the whole point of using
Getopt::Euclid in a module is to have it build an "import()" for
you, supplying your own "import()" as well defeats the purpose.
Unknown specification: %s
You specified something in a "=for Euclid" section that
Getopt::Euclid didn't understand. This is often caused by typos, or
by reversing a placeholder.type or placeholder.default
specification (that is, writing type.placeholder or
default.placeholder instead).
Unknown type (%s) in specification: %s
Unknown .type constraint: %s
Both these errors mean that you specified a type constraint that
Getopt::Euclid didn't recognize. This may have been a typo:
=for Euclid
count.type: inetger
or else the module simply doesn't know about the type you
specified:
=for Euclid
count.type: complex
See "Standard placeholder types" for a list of types that
Getopt::Euclid does recognize.
Invalid .type constraint: %s
You specified a type constraint that isn't valid Perl. For example:
=for Euclid
max.type: integer not equals 0
instead of:
=for Euclid
max.type: integer != 0
Invalid .default value: %s
You specified a default value that isn't valid Perl. For example:
=for Euclid
curse.default: *$@!&
instead of:
=for Euclid
curse.default: '*$@!&'
Invalid constraint: %s (No <%s> placeholder in argument: %s)
You attempted to define a ".type" constraint for a placeholder that
didn't exist. Typically this is the result of the misspelling of a
placeholder name:
=item -foo <bar>
=for Euclid:
baz.type: integer
or a "=for Euclid:" that has drifted away from its argument:
=item -foo <bar>
=item -verbose
=for Euclid:
bar.type: integer
Getopt::Euclid loaded a second time
You tried to load the module twice in the same program.
Getopt::Euclid doesn't work that way. Load it only once.
Unknown mode ('%s')
The only argument that a "use Getopt::Euclid" command accepts is
':minimal_keys' (see "Minimalist keys"). You specified something
else instead (or possibly forgot to put a semicolon after "use
Getopt::Euclid").
Internal error: minimalist mode caused arguments '%s' and '%s' to clash
Minimalist mode removes certain characters from the keys hat are
returned in %ARGV. This can mean that two command-line options
(such as "--step" and "<step>") map to the same key (i.e. 'step').
This in turn means that one of the two options has overwritten the
other within the %ARGV hash. The program developer should either
turn off ':minimal_keys' mode within the program, or else change
the name of one of the options so that the two no longer clash.
Run-time diagnostics
The following diagnostics are caused by problems in parsing the
command-line
Missing required argument(s): %s
At least one argument specified in the "REQUIRED ARGUMENTS" POD
section wasn't present on the command-line.
Invalid %s argument. %s must be %s but the supplied value (%s) isn't.
Getopt::Euclid recognized the argument you were trying to specify
on the command-line, but the value you gave to one of that
argument's placeholders was of the wrong type.
Unknown argument: %s
Getopt::Euclid didn't recognize an argument you were trying to
specify on the command-line. This is often caused by command-line
typos or an incomplete interface specification.
CONFIGURATION AND ENVIRONMENTGetopt::Euclid requires no configuration files or environment
variables.
DEPENDENCIES
· File::Spec::Functions
· List::Util
INCOMPATIBILITIES
None reported.
BUGS AND LIMITATIONS
Please report any bugs or feature requests to
"bug-getopt-euclid@rt.cpan.org", or through the web interface at
<http://rt.cpan.org>.
AUTHOR
Damian Conway "<DCONWAY@cpan.org>"
Kevin Galinsky "<kgalinsky+cpan at gmail.com>"
LICENCE AND COPYRIGHT
Copyright (c) 2005, Damian Conway "<DCONWAY@cpan.org>". All rights
reserved.
This module is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
DISCLAIMER OF WARRANTY
BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH
YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR, OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE
TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
perl v5.14.1 2011-06-20 Getopt::Euclid(3)
