Net::FTP man page on OpenBSD

Printed from http://www.polarhome.com/service/man/?qf=Net%3A%3AFTP&af=0&tf=2&of=OpenBSD

Net::FTP(3p)	       Perl Programmers Reference Guide		  Net::FTP(3p)

NAME
       Net::FTP - FTP Client class

SYNOPSIS
	   use Net::FTP;

	   $ftp = Net::FTP->new("some.host.name", Debug => 0)
	     or die "Cannot connect to some.host.name: $@";

	   $ftp->login("anonymous",'-anonymous@')
	     or die "Cannot login ", $ftp->message;

	   $ftp->cwd("/pub")
	     or die "Cannot change working directory ", $ftp->message;

	   $ftp->get("that.file")
	     or die "get failed ", $ftp->message;

	   $ftp->quit;

DESCRIPTION
       "Net::FTP" is a class implementing a simple FTP client in Perl as
       described in RFC959.  It provides wrappers for a subset of the RFC959
       commands.

OVERVIEW
       FTP stands for File Transfer Protocol.  It is a way of transferring
       files between networked machines.  The protocol defines a client (whose
       commands are provided by this module) and a server (not implemented in
       this module).  Communication is always initiated by the client, and the
       server responds with a message and a status code (and sometimes with
       data).

       The FTP protocol allows files to be sent to or fetched from the server.
       Each transfer involves a local file (on the client) and a remote file
       (on the server).	 In this module, the same file name will be used for
       both local and remote if only one is specified.	This means that
       transferring remote file "/path/to/file" will try to put that file in
       "/path/to/file" locally, unless you specify a local file name.

       The protocol also defines several standard translations which the file
       can undergo during transfer.  These are ASCII, EBCDIC, binary, and
       byte.  ASCII is the default type, and indicates that the sender of
       files will translate the ends of lines to a standard representation
       which the receiver will then translate back into their local
       representation.	EBCDIC indicates the file being transferred is in
       EBCDIC format.  Binary (also known as image) format sends the data as a
       contiguous bit stream.  Byte format transfers the data as bytes, the
       values of which remain the same regardless of differences in byte size
       between the two machines (in theory - in practice you should only use
       this if you really know what you're doing).

CONSTRUCTOR
       new ([ HOST ] [, OPTIONS ])
	   This is the constructor for a new Net::FTP object. "HOST" is the
	   name of the remote host to which an FTP connection is required.

	   "HOST" is optional. If "HOST" is not given then it may instead be
	   passed as the "Host" option described below.

	   "OPTIONS" are passed in a hash like fashion, using key and value
	   pairs.  Possible options are:

	   Host - FTP host to connect to. It may be a single scalar, as
	   defined for the "PeerAddr" option in IO::Socket::INET, or a
	   reference to an array with hosts to try in turn. The "host" method
	   will return the value which was used to connect to the host.

	   Firewall - The name of a machine which acts as an FTP firewall.
	   This can be overridden by an environment variable "FTP_FIREWALL".
	   If specified, and the given host cannot be directly connected to,
	   then the connection is made to the firewall machine and the string
	   @hostname is appended to the login identifier. This kind of setup
	   is also referred to as an ftp proxy.

	   FirewallType - The type of firewall running on the machine
	   indicated by Firewall. This can be overridden by an environment
	   variable "FTP_FIREWALL_TYPE". For a list of permissible types, see
	   the description of ftp_firewall_type in Net::Config.

	   BlockSize - This is the block size that Net::FTP will use when
	   doing transfers. (defaults to 10240)

	   Port - The port number to connect to on the remote machine for the
	   FTP connection

	   Timeout - Set a timeout value (defaults to 120)

	   Debug - debug level (see the debug method in Net::Cmd)

	   Passive - If set to a non-zero value then all data transfers will
	   be done using passive mode. If set to zero then data transfers will
	   be done using active mode.  If the machine is connected to the
	   Internet directly, both passive and active mode should work equally
	   well.  Behind most firewall and NAT configurations passive mode has
	   a better chance of working.	However, in some rare firewall
	   configurations, active mode actually works when passive mode
	   doesn't.  Some really old FTP servers might not implement passive
	   transfers.  If not specified, then the transfer mode is set by the
	   environment variable "FTP_PASSIVE" or if that one is not set by the
	   settings done by the libnetcfg utility.  If none of these apply
	   then passive mode is used.

	   Hash - If given a reference to a file handle (e.g., "\*STDERR"),
	   print hash marks (#) on that filehandle every 1024 bytes.  This
	   simply invokes the "hash()" method for you, so that hash marks are
	   displayed for all transfers.	 You can, of course, call "hash()"
	   explicitly whenever you'd like.

	   LocalAddr - Local address to use for all socket connections, this
	   argument will be passed to IO::Socket::INET

	   If the constructor fails undef will be returned and an error
	   message will be in $@

METHODS
       Unless otherwise stated all methods return either a true or false
       value, with true meaning that the operation was a success. When a
       method states that it returns a value, failure will be returned as
       undef or an empty list.

       login ([LOGIN [,PASSWORD [, ACCOUNT] ] ])
	   Log into the remote FTP server with the given login information. If
	   no arguments are given then the "Net::FTP" uses the "Net::Netrc"
	   package to lookup the login information for the connected host.  If
	   no information is found then a login of anonymous is used.  If no
	   password is given and the login is anonymous then anonymous@ will
	   be used for password.

	   If the connection is via a firewall then the "authorize" method
	   will be called with no arguments.

       authorize ( [AUTH [, RESP]])
	   This is a protocol used by some firewall ftp proxies. It is used to
	   authorise the user to send data out.	 If both arguments are not
	   specified then "authorize" uses "Net::Netrc" to do a lookup.

       site (ARGS)
	   Send a SITE command to the remote server and wait for a response.

	   Returns most significant digit of the response code.

       ascii
	   Transfer file in ASCII. CRLF translation will be done if required

       binary
	   Transfer file in binary mode. No transformation will be done.

	   Hint: If both server and client machines use the same line ending
	   for text files, then it will be faster to transfer all files in
	   binary mode.

       rename ( OLDNAME, NEWNAME )
	   Rename a file on the remote FTP server from "OLDNAME" to "NEWNAME".
	   This is done by sending the RNFR and RNTO commands.

       delete ( FILENAME )
	   Send a request to the server to delete "FILENAME".

       cwd ( [ DIR ] )
	   Attempt to change directory to the directory given in $dir.	If
	   $dir is "..", the FTP "CDUP" command is used to attempt to move up
	   one directory. If no directory is given then an attempt is made to
	   change the directory to the root directory.

       cdup ()
	   Change directory to the parent of the current directory.

       pwd ()
	   Returns the full pathname of the current directory.

       restart ( WHERE )
	   Set the byte offset at which to begin the next data transfer.
	   Net::FTP simply records this value and uses it when during the next
	   data transfer. For this reason this method will not return an
	   error, but setting it may cause a subsequent data transfer to fail.

       rmdir ( DIR [, RECURSE ])
	   Remove the directory with the name "DIR". If "RECURSE" is true then
	   "rmdir" will attempt to delete everything inside the directory.

       mkdir ( DIR [, RECURSE ])
	   Create a new directory with the name "DIR". If "RECURSE" is true
	   then "mkdir" will attempt to create all the directories in the
	   given path.

	   Returns the full pathname to the new directory.

       alloc ( SIZE [, RECORD_SIZE] )
	   The alloc command allows you to give the ftp server a hint about
	   the size of the file about to be transferred using the ALLO ftp
	   command. Some storage systems use this to make intelligent
	   decisions about how to store the file.  The "SIZE" argument
	   represents the size of the file in bytes. The "RECORD_SIZE"
	   argument indicates a maximum record or page size for files sent
	   with a record or page structure.

	   The size of the file will be determined, and sent to the server
	   automatically for normal files so that this method need only be
	   called if you are transferring data from a socket, named pipe, or
	   other stream not associated with a normal file.

       ls ( [ DIR ] )
	   Get a directory listing of "DIR", or the current directory.

	   In an array context, returns a list of lines returned from the
	   server. In a scalar context, returns a reference to a list.

       dir ( [ DIR ] )
	   Get a directory listing of "DIR", or the current directory in long
	   format.

	   In an array context, returns a list of lines returned from the
	   server. In a scalar context, returns a reference to a list.

       get ( REMOTE_FILE [, LOCAL_FILE [, WHERE]] )
	   Get "REMOTE_FILE" from the server and store locally. "LOCAL_FILE"
	   may be a filename or a filehandle. If not specified, the file will
	   be stored in the current directory with the same leafname as the
	   remote file.

	   If "WHERE" is given then the first "WHERE" bytes of the file will
	   not be transferred, and the remaining bytes will be appended to the
	   local file if it already exists.

	   Returns "LOCAL_FILE", or the generated local file name if
	   "LOCAL_FILE" is not given. If an error was encountered undef is
	   returned.

       put ( LOCAL_FILE [, REMOTE_FILE ] )
	   Put a file on the remote server. "LOCAL_FILE" may be a name or a
	   filehandle.	If "LOCAL_FILE" is a filehandle then "REMOTE_FILE"
	   must be specified. If "REMOTE_FILE" is not specified then the file
	   will be stored in the current directory with the same leafname as
	   "LOCAL_FILE".

	   Returns "REMOTE_FILE", or the generated remote filename if
	   "REMOTE_FILE" is not given.

	   NOTE: If for some reason the transfer does not complete and an
	   error is returned then the contents that had been transferred will
	   not be remove automatically.

       put_unique ( LOCAL_FILE [, REMOTE_FILE ] )
	   Same as put but uses the "STOU" command.

	   Returns the name of the file on the server.

       append ( LOCAL_FILE [, REMOTE_FILE ] )
	   Same as put but appends to the file on the remote server.

	   Returns "REMOTE_FILE", or the generated remote filename if
	   "REMOTE_FILE" is not given.

       unique_name ()
	   Returns the name of the last file stored on the server using the
	   "STOU" command.

       mdtm ( FILE )
	   Returns the modification time of the given file

       size ( FILE )
	   Returns the size in bytes for the given file as stored on the
	   remote server.

	   NOTE: The size reported is the size of the stored file on the
	   remote server.  If the file is subsequently transferred from the
	   server in ASCII mode and the remote server and local machine have
	   different ideas about "End Of Line" then the size of file on the
	   local machine after transfer may be different.

       supported ( CMD )
	   Returns TRUE if the remote server supports the given command.

       hash ( [FILEHANDLE_GLOB_REF],[ BYTES_PER_HASH_MARK] )
	   Called without parameters, or with the first argument false, hash
	   marks are suppressed.  If the first argument is true but not a
	   reference to a file handle glob, then \*STDERR is used.  The second
	   argument is the number of bytes per hash mark printed, and defaults
	   to 1024.  In all cases the return value is a reference to an array
	   of two:  the filehandle glob reference and the bytes per hash mark.

       feature ( NAME )
	   Determine if the server supports the specified feature. The return
	   value is a list of lines the server responded with to describe the
	   options that it supports for the given feature. If the feature is
	   unsupported then the empty list is returned.

	     if ($ftp->feature( 'MDTM' )) {
	       # Do something
	     }

	     if (grep { /\bTLS\b/ } $ftp->feature('AUTH')) {
	       # Server supports TLS
	     }

       The following methods can return different results depending on how
       they are called. If the user explicitly calls either of the "pasv" or
       "port" methods then these methods will return a true or false value. If
       the user does not call either of these methods then the result will be
       a reference to a "Net::FTP::dataconn" based object.

       nlst ( [ DIR ] )
	   Send an "NLST" command to the server, with an optional parameter.

       list ( [ DIR ] )
	   Same as "nlst" but using the "LIST" command

       retr ( FILE )
	   Begin the retrieval of a file called "FILE" from the remote server.

       stor ( FILE )
	   Tell the server that you wish to store a file. "FILE" is the name
	   of the new file that should be created.

       stou ( FILE )
	   Same as "stor" but using the "STOU" command. The name of the unique
	   file which was created on the server will be available via the
	   "unique_name" method after the data connection has been closed.

       appe ( FILE )
	   Tell the server that we want to append some data to the end of a
	   file called "FILE". If this file does not exist then create it.

       If for some reason you want to have complete control over the data
       connection, this includes generating it and calling the "response"
       method when required, then the user can use these methods to do so.

       However calling these methods only affects the use of the methods above
       that can return a data connection. They have no effect on methods
       "get", "put", "put_unique" and those that do not require data
       connections.

       port ( [ PORT ] )
	   Send a "PORT" command to the server. If "PORT" is specified then it
	   is sent to the server. If not, then a listen socket is created and
	   the correct information sent to the server.

       pasv ()
	   Tell the server to go into passive mode. Returns the text that
	   represents the port on which the server is listening, this text is
	   in a suitable form to sent to another ftp server using the "port"
	   method.

       The following methods can be used to transfer files between two remote
       servers, providing that these two servers can connect directly to each
       other.

       pasv_xfer ( SRC_FILE, DEST_SERVER [, DEST_FILE ] )
	   This method will do a file transfer between two remote ftp servers.
	   If "DEST_FILE" is omitted then the leaf name of "SRC_FILE" will be
	   used.

       pasv_xfer_unique ( SRC_FILE, DEST_SERVER [, DEST_FILE ] )
	   Like "pasv_xfer" but the file is stored on the remote server using
	   the STOU command.

       pasv_wait ( NON_PASV_SERVER )
	   This method can be used to wait for a transfer to complete between
	   a passive server and a non-passive server. The method should be
	   called on the passive server with the "Net::FTP" object for the
	   non-passive server passed as an argument.

       abort ()
	   Abort the current data transfer.

       quit ()
	   Send the QUIT command to the remote FTP server and close the socket
	   connection.

   Methods for the adventurous
       "Net::FTP" inherits from "Net::Cmd" so methods defined in "Net::Cmd"
       may be used to send commands to the remote FTP server.

       quot (CMD [,ARGS])
	   Send a command, that Net::FTP does not directly support, to the
	   remote server and wait for a response.

	   Returns most significant digit of the response code.

	   WARNING This call should only be used on commands that do not
	   require data connections. Misuse of this method can hang the
	   connection.

THE dataconn CLASS
       Some of the methods defined in "Net::FTP" return an object which will
       be derived from this class.The dataconn class itself is derived from
       the "IO::Socket::INET" class, so any normal IO operations can be
       performed.  However the following methods are defined in the dataconn
       class and IO should be performed using these.

       read ( BUFFER, SIZE [, TIMEOUT ] )
	   Read "SIZE" bytes of data from the server and place it into
	   "BUFFER", also performing any <CRLF> translation necessary.
	   "TIMEOUT" is optional, if not given, the timeout value from the
	   command connection will be used.

	   Returns the number of bytes read before any <CRLF> translation.

       write ( BUFFER, SIZE [, TIMEOUT ] )
	   Write "SIZE" bytes of data from "BUFFER" to the server, also
	   performing any <CRLF> translation necessary. "TIMEOUT" is optional,
	   if not given, the timeout value from the command connection will be
	   used.

	   Returns the number of bytes written before any <CRLF> translation.

       bytes_read ()
	   Returns the number of bytes read so far.

       abort ()
	   Abort the current data transfer.

       close ()
	   Close the data connection and get a response from the FTP server.
	   Returns true if the connection was closed successfully and the
	   first digit of the response from the server was a '2'.

UNIMPLEMENTED
       The following RFC959 commands have not been implemented:

       SMNT
	   Mount a different file system structure without changing login or
	   accounting information.

       HELP
	   Ask the server for "helpful information" (that's what the RFC says)
	   on the commands it accepts.

       MODE
	   Specifies transfer mode (stream, block or compressed) for file to
	   be transferred.

       SYST
	   Request remote server system identification.

       STAT
	   Request remote server status.

       STRU
	   Specifies file structure for file to be transferred.

       REIN
	   Reinitialize the connection, flushing all I/O and account
	   information.

REPORTING BUGS
       When reporting bugs/problems please include as much information as
       possible.  It may be difficult for me to reproduce the problem as
       almost every setup is different.

       A small script which yields the problem will probably be of help. It
       would also be useful if this script was run with the extra options
       "Debug =" 1> passed to the constructor, and the output sent with the
       bug report. If you cannot include a small script then please include a
       Debug trace from a run of your program which does yield the problem.

AUTHOR
       Graham Barr <gbarr@pobox.com>

SEE ALSO
       Net::Netrc Net::Cmd

       ftp(1), ftpd(8), RFC 959
       http://www.cis.ohio-state.edu/htbin/rfc/rfc959.html

USE EXAMPLES
       For an example of the use of Net::FTP see

       http://www.csh.rit.edu/~adam/Progs/
	   "autoftp" is a program that can retrieve, send, or list files via
	   the FTP protocol in a non-interactive manner.

CREDITS
       Henry Gabryjelski <henryg@WPI.EDU> - for the suggestion of creating
       directories recursively.

       Nathan Torkington <gnat@frii.com> - for some input on the
       documentation.

       Roderick Schertler <roderick@gate.net> - for various inputs

COPYRIGHT
       Copyright (c) 1995-2004 Graham Barr. All rights reserved.  This program
       is free software; you can redistribute it and/or modify it under the
       same terms as Perl itself.

perl v5.12.2						    September 28, 2010
[top]

List of man pages available for OpenBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net