POE::Component::ClientUserTContributed Perl DocPOE::Component::Client::HTTP(3)NAMEPOE::Component::Client::HTTP - a HTTP user-agent component
SYNOPSIS
use POE qw(Component::Client::HTTP);
POE::Component::Client::HTTP->spawn(
Agent => 'SpiffCrawler/0.90', # defaults to something long
Alias => 'ua', # defaults to 'weeble'
From => 'spiffster@perl.org', # defaults to undef (no header)
Protocol => 'HTTP/0.9', # defaults to 'HTTP/1.1'
Timeout => 60, # defaults to 180 seconds
MaxSize => 16384, # defaults to entire response
Streaming => 4096, # defaults to 0 (off)
FollowRedirects => 2, # defaults to 0 (off)
Proxy => "http://localhost:80", # defaults to HTTP_PROXY env. variable
NoProxy => [ "localhost", "127.0.0.1" ], # defs to NO_PROXY env. variable
BindAddr => "12.34.56.78", # defaults to INADDR_ANY
);
$kernel->post(
'ua', # posts to the 'ua' alias
'request', # posts to ua's 'request' state
'response', # which of our states will receive the response
$request, # an HTTP::Request object
);
# This is the sub which is called when the session receives a
# 'response' event.
sub response_handler {
my ($request_packet, $response_packet) = @_[ARG0, ARG1];
# HTTP::Request
my $request_object = $request_packet->[0];
# HTTP::Response
my $response_object = $response_packet->[0];
my $stream_chunk;
if (! defined($response_object->content)) {
$stream_chunk = $response_packet->[1];
}
print(
"*" x 78, "\n",
"*** my request:\n",
"-" x 78, "\n",
$request_object->as_string(),
"*" x 78, "\n",
"*** their response:\n",
"-" x 78, "\n",
$response_object->as_string(),
);
if (defined $stream_chunk) {
print "-" x 40, "\n", $stream_chunk, "\n";
}
print "*" x 78, "\n";
}
DESCRIPTIONPOE::Component::Client::HTTP is an HTTP user-agent for POE. It lets
other sessions run while HTTP transactions are being processed, and it
lets several HTTP transactions be processed in parallel.
It supports keep-alive through POE::Component::Client::Keepalive, which
in turn uses POE::Component::Client::DNS for asynchronous name
resolution.
HTTP client components are not proper objects. Instead of being
created, as most objects are, they are "spawned" as separate sessions.
To avoid confusion (and hopefully not cause other confusion), they must
be spawned with a "spawn" method, not created anew with a "new" one.
CONSTRUCTOR
spawn
PoCo::Client::HTTP's "spawn" method takes a few named parameters:
Agent => $user_agent_string
Agent => \@list_of_agents
If a UserAgent header is not present in the HTTP::Request, a random
one will be used from those specified by the "Agent" parameter. If
none are supplied, POE::Component::Client::HTTP will advertise itself
to the server.
"Agent" may contain a reference to a list of user agents. If this is
the case, PoCo::Client::HTTP will choose one of them at random for
each request.
Alias => $session_alias
"Alias" sets the name by which the session will be known. If no
alias is given, the component defaults to "weeble". The alias lets
several sessions interact with HTTP components without keeping (or
even knowing) hard references to them. It's possible to spawn
several HTTP components with different names.
ConnectionManager => $poco_client_keepalive
"ConnectionManager" sets this component's connection pool manager.
It expects the connection manager to be a reference to a
POE::Component::Client::Keepalive object. The HTTP client component
will call "allocate()" on the connection manager itself so you should
not have done this already.
my $pool = POE::Component::Client::Keepalive->new(
keep_alive => 10, # seconds to keep connections alive
max_open => 100, # max concurrent connections - total
max_per_host => 20, # max concurrent connections - per host
timeout => 30, # max time (seconds) to establish a new connection
);
POE::Component::Client::HTTP->spawn(
# ...
ConnectionManager => $pool,
# ...
);
See POE::Component::Client::Keepalive for more information.
CookieJar => $cookie_jar
"CookieJar" sets the component's cookie jar. It expects the cookie
jar to be a reference to a HTTP::Cookies object.
From => $admin_address
"From" holds an e-mail address where the client's administrator
and/or maintainer may be reached. It defaults to undef, which means
no From header will be included in requests.
MaxSize => OCTETS
"MaxSize" specifies the largest response to accept from a server.
The content of larger responses will be truncated to OCTET octets.
This has been used to return the <head></head> section of web pages
without the need to wade through <body></body>.
NoProxy => [ $host_1, $host_2, ..., $host_N ]
NoProxy => "host1,host2,hostN"
"NoProxy" specifies a list of server hosts that will not be proxied.
It is useful for local hosts and hosts that do not properly support
proxying. If NoProxy is not specified, a list will be taken from the
NO_PROXY environment variable.
NoProxy => [ "localhost", "127.0.0.1" ],
NoProxy => "localhost,127.0.0.1",
BindAddr => $local_ip
Specify "BindAddr" to bind all client sockets to a particular local
address. The value of BindAddr will be passed through
POE::Component::Client::Keepalive to POE::Wheel::SocketFactory (as
"bind_address"). See that module's documentation for implementation
details.
BindAddr => "12.34.56.78"
Protocol => $http_protocol_string
"Protocol" advertises the protocol that the client wishes to see.
Under normal circumstances, it should be left to its default value:
"HTTP/1.1".
Proxy => [ $proxy_host, $proxy_port ]
Proxy => $proxy_url
Proxy => $proxy_url,$proxy_url,...
"Proxy" specifies one or more proxy hosts that requests will be
passed through. If not specified, proxy servers will be taken from
the HTTP_PROXY (or http_proxy) environment variable. No proxying
will occur unless Proxy is set or one of the environment variables
exists.
The proxy can be specified either as a host and port, or as one or
more URLs. Proxy URLs must specify the proxy port, even if it is 80.
Proxy => [ "127.0.0.1", 80 ],
Proxy => "http://127.0.0.1:80/",
"Proxy" may specify multiple proxies separated by commas.
PoCo::Client::HTTP will choose proxies from this list at random.
This is useful for load balancing requests through multiple gateways.
Proxy => "http://127.0.0.1:80/,http://127.0.0.1:81/",
Streaming => OCTETS
"Streaming" changes allows Client::HTTP to return large content in
chunks (of OCTETS octets each) rather than combine the entire content
into a single HTTP::Response object.
By default, Client::HTTP reads the entire content for a response into
memory before returning an HTTP::Response object. This is obviously
bad for applications like streaming MP3 clients, because they often
fetch songs that never end. Yes, they go on and on, my friend.
When "Streaming" is set to nonzero, however, the response handler
receives chunks of up to OCTETS octets apiece. The response handler
accepts slightly different parameters in this case. ARG0 is also an
HTTP::Response object but it does not contain response content, and
ARG1 contains a a chunk of raw response content, or undef if the
stream has ended.
sub streaming_response_handler {
my $response_packet = $_[ARG1];
my ($response, $data) = @$response_packet;
print SAVED_STREAM $data if defined $data;
}
FollowRedirects => $number_of_hops_to_follow
"FollowRedirects" specifies how many redirects (e.g. 302 Moved) to
follow. If not specified defaults to 0, and thus no redirection is
followed. This maintains compatibility with the previous behavior,
which was not to follow redirects at all.
If redirects are followed, a response chain should be built, and can
be accessed through $response_object->previous(). See HTTP::Response
for details here.
Timeout => $query_timeout
"Timeout" sets how long POE::Component::Client::HTTP has to process
an application's request, in seconds. "Timeout" defaults to 180
(three minutes) if not specified.
It's important to note that the timeout begins when the component
receives an application's request, not when it attempts to connect to
the web server.
Timeouts may result from sending the component too many requests at
once. Each request would need to be received and tracked in order.
Consider this:
$_[KERNEL]->post(component => request => ...) for (1..15_000);
15,000 requests are queued together in one enormous bolus. The
component would receive and initialize them in order. The first
socket activity wouldn't arrive until the 15,000th request was set
up. If that took longer than "Timeout", then the requests that have
waited too long would fail.
"ConnectionManager"'s own timeout and concurrency limits also affect
how many requests may be processed at once. For example, most of the
15,000 requests would wait in the connection manager's pool until
sockets become available. Meanwhile, the "Timeout" would be counting
down.
Applications may elect to control concurrency outside the component's
"Timeout". They may do so in a few ways.
The easiest way is to limit the initial number of requests to
something more manageable. As responses arrive, the application
should handle them and start new requests. This limits concurrency
to the initial request count.
An application may also outsource job throttling to another module,
such as POE::Component::JobQueue.
In any case, "Timeout" and "ConnectionManager" may be tuned to
maximize timeouts and concurrency limits. This may help in some
cases. Developers should be aware that doing so will increase memory
usage. POE::Component::Client::HTTP and KeepAlive track requests in
memory, while applications are free to keep pending requests on disk.
ACCEPTED EVENTS
Sessions communicate asynchronously with PoCo::Client::HTTP. They post
requests to it, and it posts responses back.
request
Requests are posted to the component's "request" state. They include
an HTTP::Request object which defines the request. For example:
$kernel->post(
'ua', 'request', # http session alias & state
'response', # my state to receive responses
GET 'http://poe.perl.org', # a simple HTTP request
'unique id', # a tag to identify the request
'progress', # an event to indicate progress
'http://1.2.3.4:80/' # proxy to use for this request
);
Requests include the state to which responses will be posted. In the
previous example, the handler for a 'response' state will be called
with each HTTP response. The "progress" handler is optional and if
installed, the component will provide progress metrics (see sample
handler below). The "proxy" parameter is optional and if not defined,
a default proxy will be used if configured. No proxy will be used if
neither a default one nor a "proxy" parameter is defined.
pending_requests_count
There's also a pending_requests_count state that returns the number of
requests currently being processed. To receive the return value, it
must be invoked with $kernel->call().
my $count = $kernel->call('ua' => 'pending_requests_count');
cancel
Cancel a specific HTTP request. Requires a reference to the original
request (blessed or stringified) so it knows which one to cancel. See
"progress handler" below for notes on canceling streaming requests.
To cancel a request based on its blessed HTTP::Request object:
$kernel->post( component => cancel => $http_request );
To cancel a request based on its stringified HTTP::Request object:
$kernel->post( component => cancel => "$http_request" );
shutdown
Responds to all pending requests with 408 (request timeout), and then
shuts down the component and all subcomponents.
SENT EVENTS
response handler
In addition to all the usual POE parameters, HTTP responses come with
two list references:
my ($request_packet, $response_packet) = @_[ARG0, ARG1];
$request_packet contains a reference to the original HTTP::Request
object. This is useful for matching responses back to the requests
that generated them.
my $http_request_object = $request_packet->[0];
my $http_request_tag = $request_packet->[1]; # from the 'request' post
$response_packet contains a reference to the resulting HTTP::Response
object.
my $http_response_object = $response_packet->[0];
Please see the HTTP::Request and HTTP::Response manpages for more
information.
progress handler
The example progress handler shows how to calculate a percentage of
download completion.
sub progress_handler {
my $gen_args = $_[ARG0]; # args passed to all calls
my $call_args = $_[ARG1]; # args specific to the call
my $req = $gen_args->[0]; # HTTP::Request object being serviced
my $tag = $gen_args->[1]; # Request ID tag from.
my $got = $call_args->[0]; # Number of bytes retrieved so far.
my $tot = $call_args->[1]; # Total bytes to be retrieved.
my $oct = $call_args->[2]; # Chunk of raw octets received this time.
my $percent = $got / $tot * 100;
printf(
"-- %.0f%% [%d/%d]: %s\n", $percent, $got, $tot, $req->uri()
);
# To cancel the request:
# $_[KERNEL]->post( component => cancel => $req );
}
DEPRECATION WARNING
The third return argument (the raw octets received) has been
deprecated. Instead of it, use the Streaming parameter to get chunks
of content in the response handler.
REQUEST CALLBACKS
The HTTP::Request object passed to the request event can contain a CODE
reference as "content". This allows for sending large files without
wasting memory. Your callback should return a chunk of data each time
it is called, and an empty string when done. Don't forget to set the
Content-Length header correctly. Example:
my $request = HTTP::Request->new( PUT => 'http://...' );
my $file = '/path/to/large_file';
open my $fh, '<', $file;
my $upload_cb = sub {
if ( sysread $fh, my $buf, 4096 ) {
return $buf;
}
else {
close $fh;
return '';
}
};
$request->content_length( -s $file );
$request->content( $upload_cb );
$kernel->post( ua => request, 'response', $request );
CONTENT ENCODING AND COMPRESSION
Transparent content decoding has been disabled as of version 0.84.
This also removes support for transparent gzip requesting and
decompression.
To re-enable gzip compression, specify the gzip Content-Encoding and
use HTTP::Response's decoded_content() method rather than content():
my $request = HTTP::Request->new(
GET => "http://www.yahoo.com/", [
'Accept-Encoding' => 'gzip'
]
);
# ... time passes ...
my $content = $response->decoded_content();
The change in POE::Component::Client::HTTP behavior was prompted by
changes in HTTP::Response that surfaced a bug in the component's
transparent gzip handling.
Allowing the application to specify and handle content encodings seems
to be the most reliable and flexible resolution.
For more information about the problem and discussions regarding the
solution, see: <http://www.perlmonks.org/?node_id=683833> and
<http://rt.cpan.org/Ticket/Display.html?id=35538>
CLIENT HEADERSPOE::Component::Client::HTTP sets its own response headers with
additional information. All of its headers begin with "X-PCCH".
X-PCCH-Peer
X-PCCH-Peer contains the remote IPv4 address and port, separated by a
period. For example, "127.0.0.1.8675" represents port 8675 on
localhost.
Proxying will render X-PCCH-Peer nearly useless, since the socket will
be connected to a proxy rather than the server itself.
This feature was added at Doreen Grey's request. Doreen wanted a means
to find the remote server's address without having to make an
additional request.
Patches for IPv6 support are welcome.
ENVIRONMENTPOE::Component::Client::HTTP uses two standard environment variables:
HTTP_PROXY and NO_PROXY.
HTTP_PROXY sets the proxy server that Client::HTTP will forward
requests through. NO_PROXY sets a list of hosts that will not be
forwarded through a proxy.
See the Proxy and NoProxy constructor parameters for more information
about these variables.
SEE ALSO
This component is built upon HTTP::Request, HTTP::Response, and POE.
Please see its source code and the documentation for its foundation
modules to learn more. If you want to use cookies, you'll need to read
about HTTP::Cookies as well.
Also see the test program, t/01_request.t, in the PoCo::Client::HTTP
distribution.
BUGS
There is no support for CGI_PROXY or CgiProxy.
Secure HTTP (https) proxying is not supported at this time.
There is no object oriented interface. See
POE::Component::Client::Keepalive and POE::Component::Client::DNS for
examples of a decent OO interface.
AUTHOR, COPYRIGHT, & LICENSE
POE::Component::Client::HTTP is
· Copyright 1999-2009 Rocco Caputo
· Copyright 2004 Rob Bloodgood
· Copyright 2004-2005 Martijn van Beers
All rights are reserved. POE::Component::Client::HTTP is free
software; you may redistribute it and/or modify it under the same terms
as Perl itself.
CONTRIBUTORS
Joel Bernstein solved some nasty race conditions. Portugal Telecom
<http://www.sapo.pt/> was kind enough to support his contributions.
Jeff Bisbee added POD tests and documentation to pass several of them
to version 0.79. He's a kwalitee-increasing machine!
BUG TRACKER
https://rt.cpan.org/Dist/Display.html?Queue=POE-Component-Client-HTTP
REPOSITORY
http://github.com/rcaputo/poe-component-client-http
http://gitorious.org/poe-component-client-http
OTHER RESOURCES
http://search.cpan.org/dist/POE-Component-Client-HTTP/
perl v5.14.1 2010-02-15 POE::Component::Client::HTTP(3)
