Perlbal::Manual::ConfiUsertContributed Perl DPerlbal::Manual::Configuration(3)NAMEPerlbal::Manual::Configuration - How to configure Perlbal
VERSION
Perlbal 1.78.
DESCRIPTION
By default, Perlbal looks for a configuration file at
/etc/perlbal/perlbal.conf.
You can also point perlbal at a different configuration file with the
-c flag.
$ perlbal -c /home/user/perlbal.conf
-c has the alias --conf.
Setting up Perlbal as a daemon
You can run "perlbal" as a daemon:
$ perlbal --daemon -c /home/user/perlbal.conf
--daemon has the alias -d.
A common practice is to create a "perlbal.sh" file that supports the
common operations you'll require (start, stop, restart) and place it
under "/etc/init.d". You can find a sample file in
"debian/perlbal.init".
Configuration file
A Perlbal's configuration file is a text file where you create pools
and services, add servers to pools, set services' parameters and
enable/disable services.
Indentation is not mandatory, but it's considered a good practice for
readability issues.
Configuration is case insensitive, but it's also a good practice to
uppercase all directives.
Pools
Here's a sample configuration of a pool:
CREATE POOL mywebsite
POOL mywebsite ADD 10.0.0.1:80
POOL mywebsite ADD 10.0.0.2:80
The first line creates a pool called "mywebsite". The second and third
lines add two different servers to that pool.
From here on you'll be able to use this pool in a service.
Also, note that right after creating the pool, you don't need to
specify which pool you're adding servers to, as it is considered to be
the active pool:
CREATE POOL mywebsite
POOL ADD 10.0.0.1:80
POOL ADD 10.0.0.2:80
Configuring a pool in a separate file
You can create a pool in a separate file by using the "nodefile"
parameter:
CREATE POOL dynamic
SET nodefile = conf/nodelist.dat
This separate file should contain addresses in the form of "ip:port",
one per line (empty lines are ignored, as well as comments started by
the "#" sign).
Perlbal will check the file periodically for updates.
The path to the file is relative to where perlbal was started.
Note that:
SET pool nodefile = none
(also undef, null, "", '')
...unsets the nodefile, but does not remove current members.
Also note: If you set a nodefile, then modify the pool via POOL ADD or
POOL REMOVE, Perlbal will stop checking the nodefile for updates!
Check conf/load-balancer.conf and conf/nodelist.dat for an example.
Pool balance method
You can set the pool balance method:
SET pool balance_method = 'random'
At the present time, "random" is the only load balancing method
available.
Services
Here's a sample service:
CREATE SERVICE service_mywebsite
SET role = reverse_proxy
SET pool = mywebsite
SET listen = 10.0.0.3:80
The first line creates a service called "service_mywebsite".
On the three following lines we are setting up three parameters for
that service (you can see this same example in
Perlbal::Manual::LoadBalancer in more detail).
It is good practice to always start a service with the definition of
its role; this way you'll avoid error messages caused by attempting to
set parameters that are only acceptable for certain roles while Perlbal
doesn't know which role the service is supposed to be yet.
Setting parameters
You can set parameters via commands of either forms:
SET <service-name> <param> = <value>
SET <param> = <value>
For a full list of parameters see Perlbal::Manual::LoadBalancer,
Perlbal::Manual::ReverseProxy or Perlbal::Manual::WebServer.
Note on types:
'bool' values can be set using one of 1, true, yes, on, 0, false, off,
or no.
'size' values are in integer bytes, or an integer followed by 'b', 'k',
or 'm' (case-insensitive) for bytes, KiB, or MiB.
Setting parameter defaults
Outside the scope of a service you can set parameter defaults for all
following created services:
SET <param> = <value>
This takes the same parameters as the section above ""Setting
parameters"
Enabling/Disabling services
To enable a service:
ENABLE service_mywebsite
To disable a service:
DISABLE service_mywebsite
These lines is what allows you to have several services configured in a
file even if they are not currently active (a common scenario is to
configure everything on the file and then enable/disable services on-
the-fly as required; see Perlbal::Manual::Management for more
information on this process).
Including configuration files
While Perlbal doesn't natively let you include a configuration file
within another, one of its core Plugins does.
By using Perlbal::Plugin::Include you can use this feature:
LOAD include
INCLUDE = /etc/perlbal/my.conf
INCLUDE = /etc/perlbal/other.conf /etc/perlbal/*.conf
See Perlbal::Plugin::Include for further examples and more information.
Expansions
The following things expand/interpolate in config files/commands:
"${ip:eth0}"
Expands to the configured IP for interface "eth0". Probably only
works on Linux.
Comments
Comments in Perlbal's configuration files start with a "#":
# this is a comment
ENABLE myservice # this is also a comment
Environment variables
DANGABUILD_DAEMONONLY
Used in "Makefile.PL". If set to a true value the modules will not be
built.
DANGABUILD_MODULESONLY
Used in "Makefile.PL". If set to a true value only the modules will be
built, not the "perlbal" executable.
PERLBAL_DEBUG
There are four levels of debugging in Perlbal.
By setting this variable to a value between 0 and 4 (included) you will
activate Perbal's debug.
PERLBAL_DEBUG = 0 # no debug
PERLBAL_DEBUG = 4 # debug everything
These four levels are described in more detail in
Perlbal::Manual::Debugging.
PERLBAL_DEBUG_BUFFERED_UPLOADS
By setting this variable to 1 you can tell Perlbal to add a
"X-PERLBAL-BUFFERED-UPLOAD-REASON" header to requests that have to be
buffered.
This can be useful to let your backend machine know that Perlbal is
buffering the request.
The value of the header contains the reason why the request was
buffered.
PERLBAL_DEBUG_OBJ
This is the variable you'll have to set to a true value in order to
properly use the commands "obj" or "track".
See Perlbal::Manual::Management for more information.
PERLBAL_REMOVE_FIELDS
Setting this variable true will give perlbal an extra speed boost on
perl 5.10+ by removing run-time locking of field names on internal
objects. As a tradeoff this will make code such as plugins or patch
sets that incorrectly handling fields in perlbal to silently fail
rather than giving warnings and errors.
Use with caution until you trust your combination of perlbal version,
plugins and versions and other patches you may have applied. Once you
trust you perlbal instance to have no problems this option should
simply make perlbal faster.
PERLBAL_TEST_ALPHA
This is a variable used to test Perlbal's alpha features.
If you're a developer working on one of these features, first set the
variable to a true value:
PERLBAL_TEST_ALPHA = 1
And then, on your test file, use something like:
unless ($ENV{PERLBAL_TEST_ALPHA}) {
plan skip_all => 'Alpha feature; test skipped without $ENV{PERLBAL_TEST_ALPHA}';
exit 0;
} else {
plan tests => 4;
}
PERLBAL_TRACK_STATES
This is the variable you'll have to set to a true value in order to
properly use the command "state changes".
See Perlbal::Manual::Management for more information.
PERLBAL_XS_HEADERS
By setting to a true value you can enable Perlbal::XS::HTTPHeaders, if
installed.
Note that if you enable Perlbal::XS::HTTPHeaders you won't have access
to the fields of Perlbal::HTTPHeaders.
TEST_PERLBAL_FOREGROUND
This variable is used by Perlbal::Test to test Perlbal.
"TEST_PERLBAL_FOREGROUND" with a true value tells Perlbal::Test that it
should run a server in the foreground.
See Perlbal::Test for more information.
TEST_PERLBAL_USE_EXISTING
This variable is used by Perlbal::Test to test Perlbal.
If "TEST_PERLBAL_USE_EXISTING" is set to a true value then
"Perlbal::Test::start_server" will be return a socket which is
connected to an existing server's management port.
See Perlbal::Test for more information.
SEE ALSO
Perlbal::Manual::Management.
perl v5.14.2 2012-02-20 Perlbal::Manual::Configuration(3)
