Info::CiscoConfig(3) User Contributed Perl Documentation Info::CiscoConfig(3)NAMESNMP::Info::CiscoConfig - SNMP Interface to Cisco Configuration Files
AUTHOR
Justin Hunter, Eric Miller
SYNOPSIS
my $ciscoconfig = new SNMP::Info(
AutoSpecify => 1,
Debug => 1,
DestHost => 'myswitch',
Community => 'public',
Version => 2
)
or die "Can't connect to DestHost.\n";
my $class = $ciscoconfig->class();
print " Using device sub class : $class\n";
DESCRIPTIONSNMP::Info::CiscoConfig is a subclass of SNMP::Info that provides an
interface to CISCO-CONFIG-COPY-MIB, CISCO-FLASH-MIB, and OLD-CISCO-SYS-
MIB. These MIBs facilitate the writing of configuration files.
Use or create a subclass of SNMP::Info that inherits this one. Do not
use directly.
Inherited Classes
None.
Required MIBs
CISCO-CONFIG-COPY-MIB
CISCO-FLASH-MIB
OLD-CISCO-SYS-MIB
GLOBALS
These are methods that return scalar value from SNMP
$ciscoconfig->old_write_mem()
("writeMem")
$ciscoconfig->old_write_net()
("writeNet")
TABLE METHODS
These are methods that return tables of information in the form of a
reference to a hash.
Config Copy Request Table ("ccCopyTable")
$ciscoconfig->config_protocol()
("ccCopyProtocol")
$ciscoconfig->config_source_type()
("ccCopySourceFileType")
$ciscoconfig->config_dest_type()
("ccCopyDestFileType")
$ciscoconfig->config_server_addr()
("ccCopyServerAddress")
$ciscoconfig->config_filename()
("ccCopyFileName")
$ciscoconfig->config_username()
("ccCopyUserName")
$ciscoconfig->config_password()
("ccCopyUserPassword")
$ciscoconfig->config_notify_complete()
("ccCopyNotificationOnCompletion")
$ciscoconfig->config_copy_state()
("ccCopyState")
$ciscoconfig->config_copy_start_time()
("ccCopyTimeStarted")
$ciscoconfig->config_copy_complete_time()
("ccCopyTimeCompleted")
$ciscoconfig->config_fail_cause()
("ccCopyFailCause")
$ciscoconfig->config_row_status()
("ccCopyEntryRowStatus")
Flash Copy Table ("ciscoFlashCopyTable")
Table of Flash copy operation entries.
$ciscoconfig->flash_copy_cmd()
("ciscoFlashCopyCommand")
$ciscoconfig->flash_copy_protocol()
("ciscoFlashCopyProtocol")
$ciscoconfig->flash_copy_address()
("ciscoFlashCopyServerAddress")
$ciscoconfig->flash_copy_source()
("ciscoFlashCopySourceName")
$ciscoconfig->flash_copy_dest()
("ciscoFlashCopyDestinationName")
$ciscoconfig->flash_copy_row_status()
("ciscoFlashCopyEntryStatus")
SET METHODS
These are methods that provide SNMP set functionality for overridden
methods or provide a simpler interface to complex set operations. See
"SETTING DATA VIA SNMP" in SNMP::Info for general information on set
operations.
$ciscoconfig->copy_run_tftp (tftpserver, tftpfilename )
Store the running configuration on a TFTP server. Equivalent to
the CLI commands "copy running-config tftp" or "write net".
This method attempts to use newer "copy running-config tftp"
procedure first and then the older "write net" procedure if that
fails. The newer procedure is supported Cisco devices with the
CISCO-CONFIG-COPY-MIB available, Cisco IOS software release 12.0 or
on some devices as early as release 11.2P. The older procedure has
been depreciated by Cisco and is utilized only to support devices
running older code revisions.
Example:
$ciscoconfig->copy_run_tftp('1.2.3.4', 'myconfig')
or die Couldn't save config. ",$ciscoconfig->error(1);
$ciscoconfig->copy_run_start()
Copy the running configuration to the start up configuration.
Equivalent to the CLI command "copy running-config startup-config"
or "write mem".
This method attempts to use newer "copy running-config
startup-config" procedure first and then the older "write mem"
procedure if that fails. The newer procedure is supported Cisco
devices with the CISCO-CONFIG-COPY-MIB available, Cisco IOS
software release 12.0 or on some devices as early as release 11.2P.
The older procedure has been depreciated by Cisco and is utilized
only to support devices running older code revisions.
Example:
$ciscoconfig->copy_run_start()
or die "Couldn't save config. ",$ciscoconfig->error(1);
perl v5.14.1 2011-09-28 Info::CiscoConfig(3)
