Info::Layer1::S3000(3)User Contributed Perl DocumentatioInfo::Layer1::S3000(3)NAMESNMP::Info::Layer1::S3000 - SNMP Interface to Synoptics / Nortel Hubs
AUTHOR
Eric Miller
SYNOPSIS
#Let SNMP::Info determine the correct subclass for you.
my $s3000 = new SNMP::Info(
AutoSpecify => 1,
Debug => 1,
DestHost => 'myswitch',
Community => 'public',
Version => 2
)
or die "Can't connect to DestHost.\n";
my $class = $s3000->class();
print "SNMP::Info determined this device to fall under subclass : $class\n";
DESCRIPTION
Provides abstraction to the configuration information obtainable from a
Bay hub device through SNMP. Also provides device MAC to port mapping
through the proprietary MIB.
For speed or debugging purposes you can call the subclass directly, but
not after determining a more specific class using the method above.
my $s3000 = new SNMP::Info::Layer1::S3000(...);
Inherited Classes
SNMP::Info::Layer2
Required MIBs
SYNOPTICS-COMMON-MIB
SYNOPTICS-ETHERNET-MIB
Inherited MIBs
See "Required MIBs" in SNMP::Info::Layer2 for its MIB requirements.
GLOBALS
These are methods that return scalar value from SNMP
$s3000->vendor()
Returns 'nortel'
$s3000->os()
Returns 'synoptics'
$s3000->model()
Cross references $s3000->id() to the SYNOPTICS-MIB and returns the
results.
Removes "sreg-" from the model name and returns only the numeric
model identifier.
$stack->os_ver()
Returns the software version specified as major.minor.maint.
("s3AgentSwMajorVer").("s3AgentSwMinorVer").("s3AgentSwMaintVer")
$stack->os_bin()
Returns the firmware version. ("s3AgentFwVer")
$s3000->mac()
Returns MAC of the advertised IP address of the device.
Overrides
$s3000->layers()
Returns 00000011. Class emulates Layer 2 functionality through
proprietary MIBs.
Globals imported from SNMP::Info::Layer2
See "GLOBALS" in SNMP::Info::Layer2 for details.
TABLE METHODS
These are methods that return tables of information in the form of a
reference to a hash.
Overrides
$s3000->i_index()
Returns reference to map of IIDs to Interface index.
Since hubs do not support "ifIndex", the interface index is created
using the formula (board * 256 + port). This is required to
support devices with more than one module.
$s3000->interfaces()
Returns reference to map of IIDs to physical ports.
$s3000->i_duplex()
Returns half, hubs do not support full duplex.
$s3000->i_duplex_admin()
Returns half, hubs do not support full duplex.
$s3000->i_speed()
Returns 10000000. The hubs only support 10 Mbs Ethernet.
$s3000->i_up()
Returns ("s3EnetPortLinkStatus") for each port. Translates on/off
to up/down.
$s3000->i_up_admin()
Returns ("s3EnetPortPartStatus") for each port.
$s3000->set_i_up_admin(state, ifIndex)
Sets port state, must be supplied with state and port "ifIndex"
State choices are 'up' or 'down'
Example:
my %if_map = reverse %{$s3000->interfaces()};
$s3000->set_i_up_admin('down', $if_map{'1.1'})
or die "Couldn't change port state. ",$s3000->error(1);
$s3000->bp_index()
Simulates bridge MIB by returning reference to a hash containing
the index for both the keys and values.
$s3000->fw_port()
Returns reference to map of IIDs of the
"SYNOPTICS-ETHERNET-MIB::s3EnetShowNodesTable" to the Interface
index.
$s3000->fw_mac()
("s3EnetShowNodesMacAddress")
$s3000->s3000_topo_port()
Returns reference to hash. Key: Table entry, Value:Port Number
(interface iid)
("s3EnetTopNmmPort")
$s3000->s3000_topo_mac()
("s3EnetTopNmmMacAddr")
Returns reference to hash. Key: Table entry, Value:Remote MAC
address
Table Methods imported from SNMP::Info::Layer2
See "TABLE METHODS" in SNMP::Info::Layer2 for details.
perl v5.14.1 2011-09-28 Info::Layer1::S3000(3)
