Info::RapidCity(3) User Contributed Perl Documentation Info::RapidCity(3)NAMESNMP::Info::RapidCity - SNMP Interface to the Nortel RapidCity MIB
AUTHOR
Eric Miller
SYNOPSIS
# Let SNMP::Info determine the correct subclass for you.
my $rapidcity = new SNMP::Info(
AutoSpecify => 1,
Debug => 1,
# These arguments are passed directly to SNMP::Session
DestHost => 'myswitch',
Community => 'public',
Version => 2
)
or die "Can't connect to DestHost.\n";
my $class = $rapidcity->class();
print "SNMP::Info determined this device to fall under subclass : $class\n";
DESCRIPTIONSNMP::Info::RapidCity is a subclass of SNMP::Info that provides an
interface to the "RAPID-CITY" MIB. This MIB is used across the Nortel
Ethernet Routing Switch and Ethernet Switch product lines (Formerly
known as Passport, BayStack, and Accelar).
Use or create in a subclass of SNMP::Info. Do not use directly.
Inherited Classes
None.
Required MIBs
RAPID-CITY
GLOBAL METHODS
These are methods that return scalar values from SNMP
$rapidcity->rc_base_mac()
("rc2kChassisBaseMacAddr")
$rapidcity->rc_serial()
("rcChasSerialNumber")
$rapidcity->rc_ch_rev()
("rcChasHardwareRevision")
$rapidcity->chassis()
("rcChasType")
$rapidcity->slots()
("rcChasNumSlots")
$rapidcity->rc_virt_ip()
("rcSysVirtualIpAddr")
$rapidcity->rc_virt_mask()
("rcSysVirtualNetMask")
$rapidcity->tftp_host()
("rcTftpHost")
$rapidcity->tftp_file()
("rcTftpFile")
$rapidcity->tftp_action()
("rcTftpAction")
$rapidcity->tftp_result()
("rcTftpResult")
Overrides
$rapidcity->serial()
Returns serial number of the chassis
TABLE METHODS
These are methods that return tables of information in the form of a
reference to a hash.
$rapidcity->i_duplex()
Returns reference to map of IIDs to current link duplex.
$rapidcity->i_duplex_admin()
Returns reference to hash of IIDs to admin duplex setting.
$rapidcity->i_vlan()
Returns a mapping between "ifIndex" and the PVID or default VLAN.
$rapidcity->i_vlan_membership()
Returns reference to hash of arrays: key = "ifIndex", value = array
of VLAN IDs. These are the VLANs which are members of the egress
list for the port.
Example:
my $interfaces = $rapidcity->interfaces();
my $vlans = $rapidcity->i_vlan_membership();
foreach my $iid (sort keys %$interfaces) {
my $port = $interfaces->{$iid};
my $vlan = join(',', sort(@{$vlans->{$iid}}));
print "Port: $port VLAN: $vlan\n";
}
$rapidcity->v_index()
Returns VLAN IDs
("rcVlanId")
RAPID-CITY Port Table ("rcPortTable")
$rapidcity->rc_index()
("rcPortIndex")
$rapidcity->rc_duplex()
("rcPortOperDuplex")
$rapidcity->rc_duplex_admin()
("rcPortAdminDuplex")
$rapidcity->rc_speed_admin()
("rcPortAdminSpeed")
$rapidcity->rc_auto()
("rcPortAutoNegotiate")
$rapidcity->rc_alias()
("rcPortName")
RAPID-CITY CPU Ethernet Port Table ("rc2kCpuEthernetPortTable")
$rapidcity->rc_cpu_ifindex()
("rc2kCpuEthernetPortIfIndex")
$rapidcity->rc_cpu_admin()
("rc2kCpuEthernetPortAdminStatus")
$rapidcity->rc_cpu_oper()
("rc2kCpuEthernetPortOperStatus")
$rapidcity->rc_cpu_ip()
("rc2kCpuEthernetPortAddr")
$rapidcity->rc_cpu_mask()
("rc2kCpuEthernetPortMask")
$rapidcity->rc_cpu_auto()
("rc2kCpuEthernetPortAutoNegotiate")
$rapidcity->rc_cpu_duplex_admin()
("rc2kCpuEthernetPortAdminDuplex")
$rapidcity->rc_cpu_duplex()
("rc2kCpuEthernetPortOperDuplex")
$rapidcity->rc_cpu_speed_admin()
("rc2kCpuEthernetPortAdminSpeed")
$rapidcity->rc_cpu_speed_oper()
("rc2kCpuEthernetPortOperSpeed")
$rapidcity->rc_cpu_mac()
("rc2kCpuEthernetPortMgmtMacAddr")
RAPID-CITY VLAN Port Table ("rcVlanPortTable")
$rapidcity->rc_i_vlan_if()
("rcVlanPortIndex")
$rapidcity->rc_i_vlan_num()
("rcVlanPortNumVlanIds")
$rapidcity->rc_i_vlan()
("rcVlanPortVlanIds")
$rapidcity->rc_i_vlan_type()
("rcVlanPortType")
$rapidcity->rc_i_vlan_pvid()
("rcVlanPortDefaultVlanId")
$rapidcity->rc_i_vlan_tag()
("rcVlanPortPerformTagging")
RAPID-CITY VLAN Table ("rcVlanTable")
$rapidcity->rc_vlan_id()
("rcVlanId")
$rapidcity->v_name()
("rcVlanName")
$rapidcity->rc_vlan_color()
("rcVlanColor")
$rapidcity->rc_vlan_if()
("rcVlanIfIndex")
$rapidcity->rc_vlan_stg()
("rcVlanStgId")
$rapidcity->rc_vlan_type()
("rcVlanType")
$rapidcity->rc_vlan_members()
("rcVlanPortMembers")
$rapidcity->rc_vlan_mac()
("rcVlanMacAddress")
RAPID-CITY IP Address Table ("rcIpAddrTable")
$rapidcity->rc_ip_index()
("rcIpAdEntIfIndex")
$rapidcity->rc_ip_addr()
("rcIpAdEntAddr")
$rapidcity->rc_ip_type()
("rcIpAdEntIfType")
RAPID-CITY Chassis Fan Table ("rcChasFanTable")
$rapidcity->rc_fan_op()
("rcChasFanOperStatus")
RAPID-CITY Power Supply Table ("rcChasPowerSupplyTable")
$rapidcity->rc_ps_op()
("rcChasPowerSupplyOperStatus")
RAPID-CITY Power Supply Detail Table ("rcChasPowerSupplyDetailTable")
$rapidcity->rc_ps_type()
("rcChasPowerSupplyDetailType")
$rapidcity->rc_ps_serial()
("rcChasPowerSupplyDetailSerialNumber")
$rapidcity->rc_ps_rev()
("rcChasPowerSupplyDetailHardwareRevision")
$rapidcity->rc_ps_part()
("rcChasPowerSupplyDetailPartNumber")
$rapidcity->rc_ps_detail()
("rcChasPowerSupplyDetailDescription")
RAPID-CITY Card Table ("rcCardTable")
$rapidcity->rc_c_type()
("rcCardType")
$rapidcity->rc_c_serial()
("rcCardSerialNumber")
$rapidcity->rc_c_rev()
("rcCardHardwareRevision")
$rapidcity->rc_c_part()
("rcCardPartNumber")
RAPID-CITY 2k Card Table ("rc2kCardTable")
$rapidcity->rc2k_c_ftype()
("rc2kCardFrontType")
$rapidcity->rc2k_c_fdesc()
("rc2kCardFrontDescription")
$rapidcity->rc2k_c_fserial()
("rc2kCardFrontSerialNum")
$rapidcity->rc2k_c_frev()
("rc2kCardFrontHwVersion")
$rapidcity->rc2k_c_fpart()
("rc2kCardFrontPartNumber")
$rapidcity->rc2k_c_fdate()
("rc2kCardFrontDateCode")
$rapidcity->rc2k_c_fdev()
("rc2kCardFrontDeviations")
$rapidcity->rc2k_c_btype()
("rc2kCardBackType")
$rapidcity->rc2k_c_bdesc()
("rc2kCardBackDescription")
$rapidcity->rc2k_c_bserial()
("rc2kCardBackSerialNum")
$rapidcity->rc2k_c_brev()
("rc2kCardBackHwVersion")
$rapidcity->rc2k_c_bpart()
("rc2kCardBackPartNumber")
$rapidcity->rc2k_c_bdate()
("rc2kCardBackDateCode")
$rapidcity->rc2k_c_bdev()
("rc2kCardBackDeviations")
RAPID-CITY MDA Card Table ("rc2kMdaCardTable")
$rapidcity->rc2k_mda_type()
("rc2kMdaCardType")
$rapidcity->rc2k_mda_desc()
("rc2kMdaCardDescription")
$rapidcity->rc2k_mda_serial()
("rc2kMdaCardSerialNum")
$rapidcity->rc2k_mda_rev()
("rc2kMdaCardHwVersion")
$rapidcity->rc2k_mda_part()
("rc2kMdaCardPartNumber")
$rapidcity->rc2k_mda_date()
("rc2kMdaCardDateCode")
$rapidcity->rc2k_mda_dev()
("rc2kMdaCardDeviations")
SET METHODS
These are methods that provide SNMP set functionality for overridden
methods or provide a simpler interface to complex set operations. See
"SETTING DATA VIA SNMP" in SNMP::Info for general information on set
operations.
$rapidcity->set_i_speed_admin(speed, ifIndex)
Sets port speed, must be supplied with speed and port "ifIndex".
Speed choices are 'auto', '10', '100', '1000'.
Example:
my %if_map = reverse %{$rapidcity->interfaces()};
$rapidcity->set_i_speed_admin('auto', $if_map{'1.1'})
or die "Couldn't change port speed. ",$rapidcity->error(1);
$rapidcity->set_i_duplex_admin(duplex, ifIndex)
Sets port duplex, must be supplied with duplex and port "ifIndex".
Speed choices are 'auto', 'half', 'full'.
Example:
my %if_map = reverse %{$rapidcity->interfaces()};
$rapidcity->set_i_duplex_admin('auto', $if_map{'1.1'})
or die "Couldn't change port duplex. ",$rapidcity->error(1);
$rapidcity->set_i_vlan(vlan, ifIndex)
Changes an access (untagged) port VLAN, must be supplied with the
numeric VLAN ID and port "ifIndex". This method will modify the
port's VLAN membership and PVID (default VLAN). This method should
only be used on end station (non-trunk) ports.
Example:
my %if_map = reverse %{$rapidcity->interfaces()};
$rapidcity->set_i_vlan('2', $if_map{'1.1'})
or die "Couldn't change port VLAN. ",$rapidcity->error(1);
$rapidcity->set_i_pvid(pvid, ifIndex)
Sets port PVID or default VLAN, must be supplied with the numeric
VLAN ID and port "ifIndex". This method only changes the PVID, to
modify an access (untagged) port use set_i_vlan() instead.
Example:
my %if_map = reverse %{$rapidcity->interfaces()};
$rapidcity->set_i_pvid('2', $if_map{'1.1'})
or die "Couldn't change port PVID. ",$rapidcity->error(1);
$rapidcity->set_add_i_vlan_tagged(vlan, ifIndex)
Adds the port to the egress list of the VLAN, must be supplied with
the numeric VLAN ID and port "ifIndex".
Example:
my %if_map = reverse %{$rapidcity->interfaces()};
$rapidcity->set_add_i_vlan_tagged('2', $if_map{'1.1'})
or die "Couldn't add port to egress list. ",$rapidcity->error(1);
$rapidcity->set_remove_i_vlan_tagged(vlan, ifIndex)
Removes the port from the egress list of the VLAN, must be supplied
with the numeric VLAN ID and port "ifIndex".
Example:
my %if_map = reverse %{$rapidcity->interfaces()};
$rapidcity->set_remove_i_vlan_tagged('2', $if_map{'1.1'})
or die "Couldn't add port to egress list. ",$rapidcity->error(1);
$rapidcity->set_delete_vlan(vlan)
Deletes the specified VLAN from the device.
$rapidcity->set_create_vlan(name, vlan)
Creates the specified VLAN on the device.
Note: This method only allows creation of Port type VLANs and does
not allow for the setting of the Spanning Tree Group (STG) which
defaults to 1.
perl v5.14.1 2011-09-28 Info::RapidCity(3)
