TIFFReadRGBAImage man page on DigitalUNIX

Man page or keyword search:  
man Server   12896 pages
apropos Keyword Search (all sections)
Output format
DigitalUNIX logo
[printable version]

TIFFReadRGBAImage(3T)					 TIFFReadRGBAImage(3T)

NAME
       TIFFReadRGBAImage - read and decode an image into a fixed-format raster

SYNOPSIS
       #include <tiffio.h>
       #define TIFFGetR(abgr)	((abgr) & 0xff)
       #define TIFFGetG(abgr)	(((abgr) >> 8) & 0xff)
       #define TIFFGetB(abgr)	(((abgr) >> 16) & 0xff)
       #define TIFFGetA(abgr)	(((abgr) >> 24) & 0xff)
       int TIFFReadRGBAImage(TIFF* tif, u_long width, u_long height, u_long* raster, int stopOnError)

DESCRIPTION
       TIFFReadRGBAImage reads a strip- or tile-based image into memory, stor‐
       ing the result in the user supplied raster.  The raster is  assumed  to
       be  an  array of width times height 32-bit entries, where width must be
       less than or equal to the width of the image (height may	 be  any  non-
       zero  size).   If the raster dimensions are smaller than the image, the
       image data is cropped to the raster bounds.  If the  raster  height  is
       greater	than  that of the image, then the image data are placed in the
       lower part of the raster.  (Note that the raster is assume to be	 orga‐
       nized  such that the pixel at location (x,y) is raster[y*width+x]; with
       the raster origin in the lower-left hand corner.)

       Raster pixels are 8-bit packed red, green, blue,	 alpha	samples.   The
       macros  TIFFGetR,  TIFFGetG,  TIFFGetB,	and TIFFGetA should be used to
       access individual samples.  Images  without  Associated	Alpha  matting
       information have a constant Alpha of 1.0 (255).

       TIFFReadRGBAImage  converts  non-8-bit images by scaling sample values.
       Palette, grayscale, bilevel, CMYK, and YCbCr images  are	 converted  to
       RGB  transparently.  Raster pixels are returned uncorrected by any col‐
       orimetry information present in the directory.

       The paramater stopOnError specifies how to act if an error  is  encoun‐
       tered  while  reading  the  image.  If stopOnError is non-zero, then an
       error will terminate the operation;  otherwise  TIFFReadRGBAImage  will
       continue	 processing data until all the possible data in the image have
       been requested.

NOTES
       In C++ the stopOnError parameter defaults to 0.

       Samples must be either 1, 2, 4,	8,  or	16  bits.   Colorimetric  sam‐
       ples/pixel  must	 be  either  1,	 3,  or 4 (i.e.	 SamplesPerPixel minus
       ExtraSamples).

       Palettte image colormaps that appear to be incorrectly written as 8-bit
       values are automatically scaled to 16-bits.

       TIFFReadRGBAImage is just a wrapper around the more general TIFFRGBAIm‐
       age(3T) facilities.

RETURN VALUES
       1 is returned if the image was successfully read and converted.	Other‐
       wise,  0	 is  returned  if  an error was encountered and stopOnError is
       zero.

DIAGNOSTICS
       All error messages are directed to the TIFFError(3T) routine.

       Sorry, can not handle %d-bit pictures.	The  image  had	 BitsPerSample
       other than 1, 2, 4, 8, or 16.

       Sorry, can not handle %d-channel images.	 The image had SamplesPerPixel
       other than 1, 3, or 4.

       Missing needed "PhotometricInterpretation" tag.	The image did not have
       a tag that describes how to display the data.

       No  "PhotometricInterpretation" tag, assuming RGB.  The image was miss‐
       ing a tag that describes how to display it, but because it has 3	 or  4
       samples/pixel, it is assumed to be RGB.

       No  "PhotometricInterpretation"	tag, assuming min-is-black.  The image
       was missing a tag that describes how to display it, but because it  has
       1 sample/pixel, it is assumed to be a grayscale or bilevel image.

       No space for photometric conversion table.  There was insufficient mem‐
       ory for a table used to convert image samples to 8-bit RGB.

       Missing required "Colormap" tag.	  A  Palette  image  did  not  have  a
       required Colormap tag.

       No space for tile buffer.  There was insufficient memory to allocate an
       i/o buffer.

       No space for strip buffer.  There was insufficient memory  to  allocate
       an i/o buffer.

       Can not handle format.  The image has a format (combination of BitsPer‐
       Sample, SamplesPerPixel, and PhotometricInterpretation) that  TIFFRead‐
       RGBAImage can not handle.

       No space for B&W mapping table.	There was insufficient memory to allo‐
       cate a table used to map grayscale data to RGB.

       No space for Palette mapping table.  There was insufficient  memory  to
       allocate a table used to map data to 8-bit RGB.

BUGS
       Orientations  other  than bottom-left, or top-left are not handled cor‐
       rectly.

SEE ALSO
       libtiff(3T),  TIFFOpen(3T),  TIFFRGBAImage(3T),	TIFFReadRGBAStrip(3T),
       TIFFReadRGBATile(3T)

			       February 14, 1992	 TIFFReadRGBAImage(3T)
[top]

List of man pages available for DigitalUNIX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net