ReadKey(3) User Contributed Perl Documentation ReadKey(3)NAMETerm::ReadKey - A perl module for simple terminal control
SYNOPSIS
use Term::ReadKey;
ReadMode 4; # Turn off controls keys
while (not defined ($key = ReadKey(-1))) {
# No key yet
}
print "Get key $key\n";
ReadMode 0; # Reset tty mode before exiting
DESCRIPTIONTerm::ReadKey is a compiled perl module dedicated to providing simple
control over terminal driver modes (cbreak, raw, cooked, etc.,) support
for non-blocking reads, if the architecture allows, and some
generalized handy functions for working with terminals. One of the main
goals is to have the functions as portable as possible, so you can just
plug in "use Term::ReadKey" on any architecture and have a good
likelihood of it working.
Version 2.30.01: Added handling of arrows, page up/down, home/end,
insert/delete keys under Win32. These keys emit xterm-compatible
sequences. Works with Term::ReadLine::Perl.
ReadMode MODE [, Filehandle]
Takes an integer argument, which can currently be one of the
following values:
0 Restore original settings.
1 Change to cooked mode.
2 Change to cooked mode with echo off.
(Good for passwords)
3 Change to cbreak mode.
4 Change to raw mode.
5 Change to ultra-raw mode.
(LF to CR/LF translation turned off)
Or, you may use the synonyms:
restore
normal
noecho
cbreak
raw
ultra-raw
These functions are automatically applied to the STDIN handle
if no other handle is supplied. Modes 0 and 5 have some special
properties worth mentioning: not only will mode 0 restore
original settings, but it cause the next ReadMode call to save
a new set of default settings. Mode 5 is similar to mode 4,
except no CR/LF translation is performed, and if possible,
parity will be disabled (only if not being used by the
terminal, however. It is no different from mode 4 under
Windows.)
If you are executing another program that may be changing the
terminal mode, you will either want to say
ReadMode 1
system('someprogram');
ReadMode 1;
which resets the settings after the program has run, or:
$somemode=1;
ReadMode 0;
system('someprogram');
ReadMode 1;
which records any changes the program may have made, before
resetting the mode.
ReadKey MODE [, Filehandle]
Takes an integer argument, which can currently be one of the
following values:
0 Perform a normal read using getc
-1 Perform a non-blocked read
>0 Perform a timed read
(If the filehandle is not supplied, it will default to STDIN.)
If there is nothing waiting in the buffer during a non-blocked
read, then undef will be returned. Note that if the OS does not
provide any known mechanism for non-blocking reads, then a
"ReadKey -1" can die with a fatal error. This will hopefully
not be common.
If MODE is greater then zero, then ReadKey will use it as a
timeout value in seconds (fractional seconds are allowed), and
won't return "undef" until that time expires. (Note, again,
that some OS's may not support this timeout behaviour.) If MODE
is less then zero, then this is treated as a timeout of zero,
and thus will return immediately if no character is waiting. A
MODE of zero, however, will act like a normal getc.
There are currently some limitations with this call under
Windows. It may be possible that non-blocking reads will fail
when reading repeating keys from more then one console.
ReadLine MODE [, Filehandle]
Takes an integer argument, which can currently be one of the
following values:
0 Perform a normal read using scalar(<FileHandle>)
-1 Perform a non-blocked read
>0 Perform a timed read
If there is nothing waiting in the buffer during a non-blocked
read, then undef will be returned. Note that if the OS does not
provide any known mechanism for non-blocking reads, then a
"ReadLine 1" can die with a fatal error. This will hopefully
not be common. Note that a non-blocking test is only performed
for the first character in the line, not the entire line. This
call will probably not do what you assume, especially with
ReadMode's higher then 1. For example, pressing Space and then
Backspace would appear to leave you where you started, but any
timeouts would now be suspended.
This call is currently not available under Windows.
GetTerminalSize [Filehandle]
Returns either an empty array if this operation is unsupported,
or a four element array containing: the width of the terminal
in characters, the height of the terminal in character, the
width in pixels, and the height in pixels. (The pixel size will
only be valid in some environments.)
Under Windows, this function must be called with an "output"
filehandle, such as STDOUT, or a handle opened to CONOUT$.
SetTerminalSize WIDTH,HEIGHT,XPIX,YPIX [, Filehandle]
Return -1 on failure, 0 otherwise. Note that this terminal size
is only for informative value, and changing the size via this
mechanism will not change the size of the screen. For example,
XTerm uses a call like this when it resizes the screen. If any
of the new measurements vary from the old, the OS will probably
send a SIGWINCH signal to anything reading that tty or pty.
This call does not work under Windows.
GetSpeeds [, Filehandle]
Returns either an empty array if the operation is unsupported,
or a two value array containing the terminal in and out speeds,
in decimal. E.g, an in speed of 9600 baud and an out speed of
4800 baud would be returned as (9600,4800). Note that currently
the in and out speeds will always be identical in some OS's. No
speeds are reported under Windows.
GetControlChars [, Filehandle]
Returns an array containing key/value pairs suitable for a
hash. The pairs consist of a key, the name of the control
character/signal, and the value of that character, as a single
character. This call does nothing under Windows.
Each key will be an entry from the following list:
DISCARD
DSUSPEND
EOF
EOL
EOL2
ERASE
ERASEWORD
INTERRUPT
KILL
MIN
QUIT
QUOTENEXT
REPRINT
START
STATUS
STOP
SUSPEND
SWITCH
TIME
Thus, the following will always return the current interrupt
character, regardless of platform.
%keys = GetControlChars;
$int = $keys{INTERRUPT};
SetControlChars [, Filehandle]
Takes an array containing key/value pairs, as a hash will
produce. The pairs should consist of a key that is the name of
a legal control character/signal, and the value should be
either a single character, or a number in the range 0-255.
SetControlChars will die with a runtime error if an invalid
character name is passed or there is an error changing the
settings. The list of valid names is easily available via
%cchars = GetControlChars();
@cnames = keys %cchars;
This call does nothing under Windows.
AUTHOR
Kenneth Albanowski <kjahds@kjahds.com>
Currently maintained by Jonathan Stowe <jns@gellyfish.co.uk>
SUPPORT
The code is maintained at
https://github.com/jonathanstowe/TermReadKey
Please feel free to fork and suggest patches.
LICENSE
Prior to the 2.31 release the license statement was:
Copyright (C) 1994-1999 Kenneth Albanowski.
2001-2005 Jonathan Stowe and others
Unlimited distribution and/or modification is allowed as long as this
copyright notice remains intact.
And was only stated in the README file.
Because I believe the original author's intent was to be more open
than the other commonly used licenses I would like to leave that in
place. However if you or your lawyers require something with some
more words you can optionally choose to license this under the
standard Perl license:
This module is free software; you can redistribute it and/or modify it
under the terms of the Artistic License. For details, see the full
text of the license in the file "Artistic" that should have been provided
with the version of perl you are using.
This program is distributed in the hope that it will be useful, but
without any warranty; without even the implied warranty of merchantability
or fitness for a particular purpose.
POD ERRORS
Hey! The above document had some coding errors, which are explained
below:
Around line 213:
'=item' outside of any '=over'
=over without closing =back
perl v5.18.2 2013-10-26 ReadKey(3)