CHIO.CONF(5) OpenBSD Programmer's Manual CHIO.CONF(5)NAMEchio.conf - medium changer configuration file
DESCRIPTIONchio.conf is used to configure some aspects of chio(1), a medium changer.
The configuration file consists of a series of stanzas, one per changer,
enclosed in curly braces. Empty lines and lines beginning with `#' in
either file are ignored.
The following aspects may be configured:
drive Provides a non-default mapping between st(4) devices and changer
drives. For example, to map drive 0 to rst3 and drive 1 to rst2,
for changer /dev/ch0:
changer ch0 {
drive rst3
drive rst2
}
FILES
/dev/ch0 Default changer device.
/etc/chio.conf Default location for chio(1) configuration file.
SEE ALSOchio(1), mt(1)HISTORY
The chio.conf file format first appeared in OpenBSD 4.0.
OpenBSD 4.9 November 2, 2007 OpenBSD 4.9