curl man page on Haiku

Printed from http://www.polarhome.com/service/man/?qf=curl&af=0&tf=2&of=Haiku

curl(1)				  Curl Manual			       curl(1)

NAME
       curl - transfer a URL

SYNOPSIS
       curl [options] [URL...]

DESCRIPTION
       curl  is	 a tool to transfer data from or to a server, using one of the
       supported protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS,	 IMAP,
       IMAPS,  LDAP,  LDAPS,  POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS,
       TELNET and TFTP).  The command is designed to work without user	inter‐
       action.

       curl offers a busload of useful tricks like proxy support, user authen‐
       tication, FTP upload, HTTP post, SSL connections, cookies, file	trans‐
       fer resume and more. As you will see below, the number of features will
       make your head spin!

       curl is powered by  libcurl  for	 all  transfer-related	features.  See
       libcurl(3) for details.

URL
       The  URL	 syntax is protocol-dependent. You'll find a detailed descrip‐
       tion in RFC 3986.

       You can specify multiple URLs or parts of URLs  by  writing  part  sets
       within braces as in:

	http://site.{one,two,three}.com

       or you can get sequences of alphanumeric series by using [] as in:

	ftp://ftp.numericals.com/file[1-100].txt
	ftp://ftp.numericals.com/file[001-100].txt    (with leading zeros)
	ftp://ftp.letters.com/file[a-z].txt

       Nested  sequences  are not supported, but you can use several ones next
       to each other:

	http://any.org/archive[1996-1999]/vol[1-4]/part{a,b,c}.html

       You can specify any amount of URLs on the command line.	They  will  be
       fetched in a sequential manner in the specified order.

       You  can	 specify a step counter for the ranges to get every Nth number
       or letter:

	http://www.numericals.com/file[1-100:10].txt
	http://www.letters.com/file[a-z:2].txt

       If you specify URL without protocol:// prefix,  curl  will  attempt  to
       guess  what  protocol  you might want. It will then default to HTTP but
       try other protocols based on often-used host name prefixes.  For	 exam‐
       ple,  for  host names starting with "ftp." curl will assume you want to
       speak FTP.

       curl will do its best to use what you pass to it as a URL.  It  is  not
       trying  to  validate it as a syntactically correct URL by any means but
       is instead very liberal with what it accepts.

       Curl will attempt to re-use connections for multiple file transfers, so
       that  getting many files from the same server will not do multiple con‐
       nects / handshakes. This improves speed. Of course this is only done on
       files  specified	 on  a	single command line and cannot be used between
       separate curl invokes.

PROGRESS METER
       curl normally displays a progress meter during  operations,  indicating
       the  amount  of	transferred  data,  transfer speeds and estimated time
       left, etc.

       curl displays this data to the terminal by default, so  if  you	invoke
       curl  to do an operation and it is about to write data to the terminal,
       it disables the progress meter as otherwise it would mess up the output
       mixing progress meter and response data.

       If you want a progress meter for HTTP POST or PUT requests, you need to
       redirect the response output to a file, using shell  redirect  (>),  -o
       [file] or similar.

       It  is not the same case for FTP upload as that operation does not spit
       out any response data to the terminal.

       If you prefer a progress "bar" instead of the regular meter, -# is your
       friend.

OPTIONS
       In general, all boolean options are enabled with --option and yet again
       disabled with --no-option. That is, you use the exact same option  name
       but prefix it with "no-". However, in this list we mostly only list and
       show the --option version of them. (This concept with --no options  was
       added  in  7.19.0.  Previously  most  options  were  toggled  on/off on
       repeated use of the same command line option.)

       -#, --progress-bar
	      Make curl display progress as a simple progress bar  instead  of
	      the standard, more informational, meter.

       -0, --http1.0
	      (HTTP)  Forces curl to issue its requests using HTTP 1.0 instead
	      of using its internally preferred: HTTP 1.1.

       -1, --tlsv1
	      (SSL) Forces curl to use TLS version 1 when negotiating  with  a
	      remote TLS server.

       -2, --sslv2
	      (SSL)  Forces  curl to use SSL version 2 when negotiating with a
	      remote SSL server.

       -3, --sslv3
	      (SSL) Forces curl to use SSL version 3 when negotiating  with  a
	      remote SSL server.

       -4, --ipv4
	      If  libcurl  is  capable	of resolving an address to multiple IP
	      versions (which it is if it is IPv6-capable), this option	 tells
	      libcurl to resolve names to IPv4 addresses only.

       -6, --ipv6
	      If  libcurl  is  capable	of resolving an address to multiple IP
	      versions (which it is if it is IPv6-capable), this option	 tells
	      libcurl  to  resolve names to IPv6 addresses only.  default sta‐
	      tistics.

       -a, --append
	      (FTP/SFTP) When used in an upload, this will tell curl to append
	      to  the  target  file  instead  of  overwriting  it. If the file
	      doesn't exist, it will be	 created.   Note  that	this  flag  is
	      ignored by some SSH servers (including OpenSSH).

       -A, --user-agent <agent string>
	      (HTTP) Specify the User-Agent string to send to the HTTP server.
	      Some  badly  done	 CGIs  fail  if	 this  field  isn't   set   to
	      "Mozilla/4.0".  To  encode  blanks  in  the string, surround the
	      string with single quote marks. This can also be	set  with  the
	      -H, --header option of course.

	      If  this	option is set more than once, the last one will be the
	      one that's used.

       --anyauth
	      (HTTP) Tells curl to figure out authentication method by itself,
	      and  use	the most secure one the remote site claims to support.
	      This is done by first doing a request and checking the response-
	      headers,	thus  possibly	inducing  an extra network round-trip.
	      This is  used  instead  of  setting  a  specific	authentication
	      method,  which  you  can	do with --basic, --digest, --ntlm, and
	      --negotiate.

	      Note that using --anyauth is not recommended if you  do  uploads
	      from  stdin, since it may require data to be sent twice and then
	      the client must be able to rewind. If the need should arise when
	      uploading from stdin, the upload operation will fail.

       -b, --cookie <name=data>
	      (HTTP)  Pass the data to the HTTP server as a cookie. It is sup‐
	      posedly the data previously received from the server in a	 "Set-
	      Cookie:"	line.  The data should be in the format "NAME1=VALUE1;
	      NAME2=VALUE2".

	      If no '=' symbol is used in the line, it is treated as  a	 file‐
	      name  to	use to read previously stored cookie lines from, which
	      should be used in this session if they match. Using this	method
	      also  activates  the "cookie parser" which will make curl record
	      incoming cookies too, which may be handy if you're using this in
	      combination  with	 the -L, --location option. The file format of
	      the file to read cookies from should be plain  HTTP  headers  or
	      the Netscape/Mozilla cookie file format.

	      NOTE  that  the file specified with -b, --cookie is only used as
	      input. No cookies will be stored in the file. To store  cookies,
	      use  the -c, --cookie-jar option or you could even save the HTTP
	      headers to a file using -D, --dump-header!

	      If this option is set more than once, the last one will  be  the
	      one that's used.

       -B, --use-ascii
	      Enable  ASCII transfer when using FTP or LDAP. For FTP, this can
	      also be enforced by using an URL that ends with ";type=A".  This
	      option  causes  data sent to stdout to be in text mode for win32
	      systems.

       --basic
	      (HTTP) Tells curl to use HTTP Basic authentication. This is  the
	      default  and this option is usually pointless, unless you use it
	      to override a  previously	 set  option  that  sets  a  different
	      authentication  method  (such  as --ntlm, --digest, or --negoti‐
	      ate).

       -c, --cookie-jar <file name>
	      Specify to which file you want curl to write all cookies after a
	      completed	 operation.  Curl  writes  all cookies previously read
	      from a specified file as	well  as  all  cookies	received  from
	      remote server(s). If no cookies are known, no file will be writ‐
	      ten. The file will be written using  the	Netscape  cookie  file
	      format.  If  you	set  the  file name to a single dash, "-", the
	      cookies will be written to stdout.

	      This command line option will activate the  cookie  engine  that
	      makes curl record and use cookies. Another way to activate it is
	      to use the -b, --cookie option.

	      If the cookie jar can't be created or written to, the whole curl
	      operation	 won't	fail or even report an error clearly. Using -v
	      will get a warning displayed, but that is the only visible feed‐
	      back you get about this possibly lethal situation.

	      If  this	option	is used several times, the last specified file
	      name will be used.

       -C, --continue-at <offset>
	      Continue/Resume a previous file transfer at  the	given  offset.
	      The  given  offset  is  the  exact  number of bytes that will be
	      skipped, counting from the beginning of the source  file	before
	      it is transferred to the destination.  If used with uploads, the
	      FTP server command SIZE will not be used by curl.

	      Use "-C -" to tell curl to automatically find out	 where/how  to
	      resume  the  transfer. It then uses the given output/input files
	      to figure that out.

	      If this option is used several times, the last one will be used.

       --ciphers <list of ciphers>
	      (SSL) Specifies which ciphers to use in the connection. The list
	      of  ciphers  must	 specify  valid ciphers. Read up on SSL cipher
	      list	    details	      on	   this		  URL:
	      http://www.openssl.org/docs/apps/ciphers.html

	      NSS  ciphers  are	 done differently than OpenSSL and GnuTLS. The
	      full list of NSS ciphers is in the NSSCipherSuite entry at  this
	      URL: http://directory.fedora.redhat.com/docs/mod_nss.html#Direc‐
	      tives

	      If this option is used several times, the last one will override
	      the others.

       --compressed
	      (HTTP) Request a compressed response using one of the algorithms
	      libcurl supports, and save the uncompressed document.   If  this
	      option  is  used	and  the server sends an unsupported encoding,
	      curl will report an error.

       --connect-timeout <seconds>
	      Maximum time in seconds that you allow  the  connection  to  the
	      server  to  take.	  This	only limits the connection phase, once
	      curl has connected this option is of no more use. See  also  the
	      -m, --max-time option.

	      If this option is used several times, the last one will be used.

       --create-dirs
	      When  used  in  conjunction with the -o option, curl will create
	      the necessary local directory hierarchy as needed.  This	option
	      creates  the dirs mentioned with the -o option, nothing else. If
	      the -o file name uses no dir or if the dirs it mentions  already
	      exist, no dir will be created.

	      To  create remote directories when using FTP or SFTP, try --ftp-
	      create-dirs.

       --crlf (FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).

       --crlfile <file>
	      (HTTPS/FTPS) Provide a file using PEM format with a  Certificate
	      Revocation  List	that may specify peer certificates that are to
	      be considered revoked.

	      If this option is used several times, the last one will be used.

	      (Added in 7.19.7)

       -d, --data <data>
	      (HTTP) Sends the specified data in a POST request	 to  the  HTTP
	      server,  in  the	same  way  that a browser does when a user has
	      filled in an HTML form and presses the submit button. This  will
	      cause curl to pass the data to the server using the content-type
	      application/x-www-form-urlencoded.  Compare to -F, --form.

	      -d, --data is the same as	 --data-ascii.	To  post  data	purely
	      binary, you should instead use the --data-binary option. To URL-
	      encode the value of a form field you may use --data-urlencode.

	      If any of these options is used more than once on the same  com‐
	      mand  line,  the	data  pieces specified will be merged together
	      with a separating	 &-symbol.  Thus,  using  '-d  name=daniel  -d
	      skill=lousy'  would  generate  a	post  chunk  that  looks  like
	      'name=daniel&skill=lousy'.

	      If you start the data with the letter @, the rest	 should	 be  a
	      file  name  to read the data from, or - if you want curl to read
	      the data from stdin.  The contents of the file must  already  be
	      URL-encoded.  Multiple files can also be specified. Posting data
	      from a file named 'foobar' would thus be done with --data	 @foo‐
	      bar.

       -D, --dump-header <file>
	      Write the protocol headers to the specified file.

	      This  option  is handy to use when you want to store the headers
	      that a HTTP site sends to you. Cookies from  the	headers	 could
	      then  be	read  in  a  second  curl  invocation by using the -b,
	      --cookie option! The -c, --cookie-jar option is however a better
	      way to store cookies.

	      When  used  in FTP, the FTP server response lines are considered
	      being "headers" and thus are saved there.

	      If this option is used several times, the last one will be used.
	      IP "--data-ascii <data>" See -d, --data.

       --data-binary <data>
	      (HTTP)  This  posts data exactly as specified with no extra pro‐
	      cessing whatsoever.

	      If you start the data with the letter @, the rest	 should	 be  a
	      filename.	  Data	is  posted in a similar manner as --data-ascii
	      does, except that newlines are  preserved	 and  conversions  are
	      never done.

	      If  this	option	is  used several times, the ones following the
	      first will append data as described in -d, --data.

       --data-urlencode <data>
	      (HTTP) This posts data, similar to the other --data options with
	      the exception that this performs URL-encoding. (Added in 7.18.0)

	      To  be  CGI-compliant,  the <data> part should begin with a name
	      followed by a separator and a content specification. The	<data>
	      part can be passed to curl using one of the following syntaxes:

	      content
		     This  will make curl URL-encode the content and pass that
		     on. Just be careful so that the content  doesn't  contain
		     any  =  or	 @  symbols, as that will then make the syntax
		     match one of the other cases below!

	      =content
		     This will make curl URL-encode the content and pass  that
		     on. The preceding = symbol is not included in the data.

	      name=content
		     This  will make curl URL-encode the content part and pass
		     that on. Note that the name part is expected to  be  URL-
		     encoded already.

	      @filename
		     This  will	 make  curl  load  data	 from  the  given file
		     (including any newlines), URL-encode that data  and  pass
		     it on in the POST.

	      name@filename
		     This  will	 make  curl  load  data	 from  the  given file
		     (including any newlines), URL-encode that data  and  pass
		     it	 on  in	 the  POST.  The  name part gets an equal sign
		     appended, resulting in name=urlencoded-file-content. Note
		     that the name is expected to be URL-encoded already.

       --delegation LEVEL
	      Set LEVEL to tell the server what it is allowed to delegate when
	      it comes to user credentials. Used with GSS/kerberos.

	      none   Don't allow any delegation.

	      policy Delegates if and only if the OK-AS-DELEGATE flag  is  set
		     in	 the  Kerberos	service	 ticket,  which is a matter of
		     realm policy.

	      always Unconditionally allow the server to delegate.

       --digest
	      (HTTP) Enables HTTP Digest authentication. This is a authentica‐
	      tion that prevents the password from being sent over the wire in
	      clear text. Use this in combination with the normal  -u,	--user
	      option to set user name and password. See also --ntlm, --negoti‐
	      ate and --anyauth for related options.

	      If this option is used several times, the following  occurrences
	      make no difference.

       --disable-eprt
	      (FTP) Tell curl to disable the use of the EPRT and LPRT commands
	      when doing active FTP transfers. Curl will normally always first
	      attempt  to use EPRT, then LPRT before using PORT, but with this
	      option, it will use PORT right away. EPRT and  LPRT  are	exten‐
	      sions  to	 the  original	FTP  protocol, and may not work on all
	      servers, but they enable more functionality in a better way than
	      the traditional PORT command.

	      --eprt can be used to explicitly enable EPRT again and --no-eprt
	      is an alias for --disable-eprt.

	      Disabling EPRT only changes the active behavior. If you want  to
	      switch  to  passive  mode	 you need to not use -P, --ftp-port or
	      force it with --ftp-pasv.

       --disable-epsv
	      (FTP) Tell curl to disable the use  of  the  EPSV	 command  when
	      doing  passive  FTP  transfers.  Curl will normally always first
	      attempt to use EPSV before PASV, but with this option,  it  will
	      not try using EPSV.

	      --epsv can be used to explicitly enable EPSV again and --no-epsv
	      is an alias for --disable-epsv.

	      Disabling EPSV only changes the passive behavior. If you want to
	      switch to active mode you need to use -P, --ftp-port.

       -e, --referer <URL>
	      (HTTP)  Sends the "Referer Page" information to the HTTP server.
	      This can also be set with the -H, --header flag of course.  When
	      used with -L, --location you can append ";auto" to the --referer
	      URL to make curl automatically set the previous URL when it fol‐
	      lows  a  Location: header. The ";auto" string can be used alone,
	      even if you don't set an initial --referer.

	      If this option is used several times, the last one will be used.

       -E, --cert <certificate[:password]>
	      (SSL) Tells curl to use the specified  client  certificate  file
	      when getting a file with HTTPS, FTPS or another SSL-based proto‐
	      col. The certificate must be in PEM  format.   If	 the  optional
	      password	isn't  specified, it will be queried for on the termi‐
	      nal. Note that this option assumes a "certificate" file that  is
	      the  private  key	 and the private certificate concatenated! See
	      --cert and --key to specify them independently.

	      If curl is built against the NSS SSL library  then  this	option
	      can  tell curl the nickname of the certificate to use within the
	      NSS database defined by the environment variable SSL_DIR (or  by
	      default  /etc/pki/nssdb).	 If  the  NSS PEM PKCS#11 module (lib‐
	      nsspem.so) is available then PEM files may  be  loaded.  If  you
	      want to use a file from the current directory, please precede it
	      with "./" prefix, in order to avoid confusion with a nickname.

	      If this option is used several times, the last one will be used.

       --engine <name>
	      Select the OpenSSL crypto engine to use for  cipher  operations.
	      Use  --engine  list  to  print  a	 list  of build-time supported
	      engines. Note that not all (or  none)  of	 the  engines  may  be
	      available at run-time.

       --environment
	      (RISC  OS ONLY) Sets a range of environment variables, using the
	      names the -w option supports, to allow easier extraction of use‐
	      ful information after having run curl.

       --egd-file <file>
	      (SSL)  Specify  the  path	 name  to the Entropy Gathering Daemon
	      socket. The socket is used to seed the  random  engine  for  SSL
	      connections. See also the --random-file option.

       --cert-type <type>
	      (SSL)  Tells curl what certificate type the provided certificate
	      is in. PEM, DER and ENG are recognized types.  If not specified,
	      PEM is assumed.

	      If this option is used several times, the last one will be used.

       --cacert <CA certificate>
	      (SSL) Tells curl to use the specified certificate file to verify
	      the peer. The file may contain  multiple	CA  certificates.  The
	      certificate(s)  must be in PEM format. Normally curl is built to
	      use a default file for this, so this option is typically used to
	      alter that default file.

	      curl  recognizes the environment variable named 'CURL_CA_BUNDLE'
	      if it is set, and uses the given path as a path  to  a  CA  cert
	      bundle. This option overrides that variable.

	      The  windows  version  of	 curl will automatically look for a CA
	      certs file named ´curl-ca-bundle.crt´, either in the same direc‐
	      tory as curl.exe, or in the Current Working Directory, or in any
	      folder along your PATH.

	      If curl is built against the NSS SSL library  then  this	option
	      tells  curl the nickname of the CA certificate to use within the
	      NSS database defined by the environment variable SSL_DIR (or  by
	      default  /etc/pki/nssdb).	  If  the NSS PEM PKCS#11 module (lib‐
	      nsspem.so) is available then PEM files may be loaded.

	      If this option is used several times, the last one will be used.

       --capath <CA certificate directory>
	      (SSL) Tells curl to use the specified certificate	 directory  to
	      verify  the  peer.  Multiple paths can be provided by separating
	      them with ":" (e.g.  "path1:path2:path3"). The certificates must
	      be  in  PEM  format,  and	 if curl is built against OpenSSL, the
	      directory must have been processed using	the  c_rehash  utility
	      supplied	with OpenSSL. Using --capath can allow OpenSSL-powered
	      curl to make SSL-connections much more  efficiently  than	 using
	      --cacert if the --cacert file contains many CA certificates.

	      If this option is set, the default capath value will be ignored,
	      and if it is used several times, the last one will be used.

       -f, --fail
	      (HTTP) Fail silently (no output at all) on server	 errors.  This
	      is  mostly done to better enable scripts etc to better deal with
	      failed attempts. In normal cases when a  HTTP  server  fails  to
	      deliver  a  document,  it	 returns  an  HTML document stating so
	      (which often also describes why and more). This flag  will  pre‐
	      vent curl from outputting that and return error 22.

	      This  method is not fail-safe and there are occasions where non-
	      successful response codes will  slip  through,  especially  when
	      authentication is involved (response codes 401 and 407).

       -F, --form <name=content>
	      (HTTP)  This  lets curl emulate a filled-in form in which a user
	      has pressed the submit button. This causes  curl	to  POST  data
	      using  the  Content-Type	multipart/form-data  according	to RFC
	      2388. This enables uploading of binary files etc. To  force  the
	      'content'	 part  to  be  a  file, prefix the file name with an @
	      sign. To just get the content part from a file, prefix the  file
	      name  with  the symbol <. The difference between @ and < is then
	      that @ makes a file get attached in the post as a	 file  upload,
	      while  the  <  makes  a text field and just get the contents for
	      that text field from a file.

	      Example, to send your password file to the server, where	'pass‐
	      word' is the name of the form-field to which /etc/passwd will be
	      the input:

	      curl -F password=@/etc/passwd www.mypasswords.com

	      To read content from stdin instead of a file, use - as the file‐
	      name. This goes for both @ and < constructs.

	      You  can	also  tell  curl  what	Content-Type  to  use by using
	      'type=', in a manner similar to:

	      curl -F "web=@index.html;type=text/html" url.com

	      or

	      curl -F "name=daniel;type=text/foo" url.com

	      You can also explicitly change the name field of a  file	upload
	      part by setting filename=, like this:

	      curl -F "file=@localfile;filename=nameinpost" url.com

	      See further examples and details in the MANUAL.

	      This option can be used multiple times.

       --ftp-account [data]
	      (FTP) When an FTP server asks for "account data" after user name
	      and password has been provided, this data is sent off using  the
	      ACCT command. (Added in 7.13.0)

	      If  this option is used twice, the second will override the pre‐
	      vious use.

       --ftp-alternative-to-user <command>
	      (FTP) If authenticating with the USER and PASS  commands	fails,
	      send  this  command.   When  connecting  to  Tumbleweed's Secure
	      Transport server over FTPS using	a  client  certificate,	 using
	      "SITE  AUTH"  will tell the server to retrieve the username from
	      the certificate. (Added in 7.15.5)

       --ftp-create-dirs
	      (FTP/SFTP) When an FTP or SFTP URL/operation uses	 a  path  that
	      doesn't  currently exist on the server, the standard behavior of
	      curl is to fail. Using this option, curl will instead attempt to
	      create missing directories.

       --ftp-method [method]
	      (FTP)  Control  what method curl should use to reach a file on a
	      FTP(S) server. The method argument should be one of the  follow‐
	      ing alternatives:

	      multicwd
		     curl  does	 a  single CWD operation for each path part in
		     the given URL. For deep hierarchies this means very  many
		     commands.	This  is  how RFC 1738 says it should be done.
		     This is the default but the slowest behavior.

	      nocwd  curl does no CWD at all. curl will do  SIZE,  RETR,  STOR
		     etc and give a full path to the server for all these com‐
		     mands. This is the fastest behavior.

	      singlecwd
		     curl does one CWD with the full target directory and then
		     operates  on  the	file  "normally" (like in the multicwd
		     case). This is somewhat  more  standards  compliant  than
		     'nocwd' but without the full penalty of 'multicwd'.
       (Added in 7.15.1)

       --ftp-pasv
	      (FTP)  Use  passive mode for the data connection. Passive is the
	      internal default behavior, but using this option can be used  to
	      override a previous -P/-ftp-port option. (Added in 7.11.0)

	      If  this option is used several times, the following occurrences
	      make no difference. Undoing an  enforced	passive	 really	 isn't
	      doable  but you must then instead enforce the correct -P, --ftp-
	      port again.

	      Passive mode means that curl will try the EPSV command first and
	      then PASV, unless --disable-epsv is used.

       --ftp-skip-pasv-ip
	      (FTP) Tell curl to not use the IP address the server suggests in
	      its response to curl's PASV command when curl connects the  data
	      connection.  Instead  curl  will	re-use	the same IP address it
	      already uses for the control connection. (Added in 7.14.2)

	      This option has no effect if PORT, EPRT or EPSV is used  instead
	      of PASV.

       --ftp-pret
	      (FTP)  Tell  curl to send a PRET command before PASV (and EPSV).
	      Certain FTP servers, mainly drftpd,  require  this  non-standard
	      command  for  directory  listings as well as up and downloads in
	      PASV mode.  (Added in 7.20.x)

       --ftp-ssl-ccc
	      (FTP) Use CCC (Clear Command Channel)  Shuts  down  the  SSL/TLS
	      layer after authenticating. The rest of the control channel com‐
	      munication will be unencrypted. This allows NAT routers to  fol‐
	      low the FTP transaction. The default mode is passive. See --ftp-
	      ssl-ccc-mode for other modes.  (Added in 7.16.1)

       --ftp-ssl-ccc-mode [active/passive]
	      (FTP) Use CCC (Clear Command Channel) Sets  the  CCC  mode.  The
	      passive  mode  will  not initiate the shutdown, but instead wait
	      for the server to do it, and will not reply to the shutdown from
	      the server. The active mode initiates the shutdown and waits for
	      a reply from the server.	(Added in 7.16.2)

       --ftp-ssl-control
	      (FTP) Require SSL/TLS for the FTP	 login,	 clear	for  transfer.
	      Allows  secure  authentication, but non-encrypted data transfers
	      for efficiency.  Fails the transfer if the server	 doesn't  sup‐
	      port SSL/TLS.  (Added in 7.16.0) that can still be used but will
	      be removed in a future version.

       --form-string <name=string>
	      (HTTP) Similar to --form except that the value  string  for  the
	      named  parameter	is used literally. Leading '@' and '<' charac‐
	      ters, and the ';type=' string in the value have no special mean‐
	      ing. Use this in preference to --form if there's any possibility
	      that the string value may accidentally trigger the  '@'  or  '<'
	      features of --form.

       -g, --globoff
	      This option switches off the "URL globbing parser". When you set
	      this option, you can specify URLs that contain the letters  {}[]
	      without  having them being interpreted by curl itself. Note that
	      these letters are not normal legal URL contents but they	should
	      be encoded according to the URI standard.

       -G, --get
	      When  used,  this	 option	 will make all data specified with -d,
	      --data or --data-binary to be used in a HTTP GET request instead
	      of  the POST request that otherwise would be used. The data will
	      be appended to the URL with a '?' separator.

	      If used in combination with -I, the POST data  will  instead  be
	      appended to the URL with a HEAD request.

	      If  this option is used several times, the following occurrences
	      make no difference. This is because undoing a GET	 doesn't  make
	      sense,  but  you	should	then  instead  enforce the alternative
	      method you prefer.

       -H, --header <header>
	      (HTTP) Extra header to use when getting  a  web  page.  You  may
	      specify any number of extra headers. Note that if you should add
	      a custom header that has the same name as one  of	 the  internal
	      ones  curl  would	 use,  your externally set header will be used
	      instead of the internal one. This allows you to make even trick‐
	      ier  stuff  than	curl would normally do. You should not replace
	      internally set  headers  without	knowing	 perfectly  well  what
	      you're  doing. Remove an internal header by giving a replacement
	      without content on the right  side  of  the  colon,  as  in:  -H
	      "Host:".	If  you	 send the custom header with no-value then its
	      header must be terminated with a semicolon, such as  -H  "X-Cus‐
	      tom-Header;" to send "X-Custom-Header:".

	      curl  will  make	sure  that each header you add/replace is sent
	      with the proper end-of-line marker, you should thus not add that
	      as a part of the header content: do not add newlines or carriage
	      returns, they will only mess things up for you.

	      See also the -A, --user-agent and -e, --referer options.

	      This option can be used  multiple	 times	to  add/replace/remove
	      multiple headers.

       --hostpubmd5 <md5>
	      Pass  a  string  containing  32  hexadecimal  digits. The string
	      should be the 128 bit MD5 checksum of the remote	host's	public
	      key,  curl  will	refuse the connection with the host unless the
	      md5sums match. This option is only for SCP and  SFTP  transfers.
	      (Added in 7.17.1)

       --ignore-content-length
	      (HTTP)  Ignore  the  Content-Length header. This is particularly
	      useful for servers running Apache 1.x, which will report	incor‐
	      rect Content-Length for files larger than 2 gigabytes.

       -i, --include
	      (HTTP)  Include  the  HTTP-header in the output. The HTTP-header
	      includes things like server-name, date of	 the  document,	 HTTP-
	      version and more...

       -I, --head
	      (HTTP/FTP/FILE) Fetch the HTTP-header only! HTTP-servers feature
	      the command HEAD which this uses to get nothing but  the	header
	      of  a  document.	When used on a FTP or FILE file, curl displays
	      the file size and last modification time only.

       --interface <name>
	      Perform an operation using a specified interface. You can	 enter
	      interface	 name,	IP address or host name. An example could look
	      like:

	       curl --interface eth0:1 http://www.netscape.com/

	      If this option is used several times, the last one will be used.

       -j, --junk-session-cookies
	      (HTTP) When curl is told to read cookies from a given file, this
	      option  will  make  it  discard all "session cookies". This will
	      basically have the same effect as if a new session  is  started.
	      Typical  browsers	 always	 discard  session cookies when they're
	      closed down.

       -J, --remote-header-name
	      (HTTP) This option tells the -O, --remote-name option to use the
	      server-specified	 Content-Disposition   filename	  instead   of
	      extracting a filename from the URL.

       -k, --insecure
	      (SSL) This option explicitly allows curl to  perform  "insecure"
	      SSL connections and transfers. All SSL connections are attempted
	      to be made secure by using the CA certificate  bundle  installed
	      by  default.  This  makes	 all connections considered "insecure"
	      fail unless -k, --insecure is used.

	      See    this    online    resource	   for	  further     details:
	      http://curl.haxx.se/docs/sslcerts.html

       -K, --config <config file>
	      Specify  which config file to read curl arguments from. The con‐
	      fig file is a text file in which command line arguments  can  be
	      written  which  then will be used as if they were written on the
	      actual command line. Options and their parameters must be speci‐
	      fied  on	the  same  config  file line, separated by whitespace,
	      colon, the equals sign or any combination thereof (however,  the
	      preferred	 separator is the equals sign). If the parameter is to
	      contain  whitespace,  the	 parameter  must  be  enclosed	within
	      quotes. Within double quotes, the following escape sequences are
	      available: \\, \", \t, \n, \r and \v. A backslash preceding  any
	      other letter is ignored. If the first column of a config line is
	      a '#' character, the rest of the line will be treated as a  com‐
	      ment.  Only  write  one  option  per physical line in the config
	      file.

	      Specify the filename to -K, --config as '-' to  make  curl  read
	      the file from stdin.

	      Note  that  to  be able to specify a URL in the config file, you
	      need to specify it using the --url option,  and  not  by	simply
	      writing  the  URL	 on its own line. So, it could look similar to
	      this:

	      url = "http://curl.haxx.se/docs/"

	      Long option names can optionally be given	 in  the  config  file
	      without the initial double dashes.

	      When curl is invoked, it always (unless -q is used) checks for a
	      default config file and uses it if  found.  The  default	config
	      file is checked for in the following places in this order:

	      1)  curl	tries  to find the "home dir": It first checks for the
	      CURL_HOME and then the HOME environment variables. Failing that,
	      it  uses getpwuid() on UNIX-like systems (which returns the home
	      dir given the current user in your system). On Windows, it  then
	      checks for the APPDATA variable, or as a last resort the '%USER‐
	      PROFILE%\Application Data'.

	      2) On windows, if there is no _curlrc file in the home  dir,  it
	      checks for one in the same dir the curl executable is placed. On
	      UNIX-like systems, it will simply try to load .curlrc  from  the
	      determined home dir.

	      # --- Example file ---
	      # this is a comment
	      url = "curl.haxx.se"
	      output = "curlhere.html"
	      user-agent = "superagent/1.0"

	      # and fetch another URL too
	      url = "curl.haxx.se/docs/manpage.html"
	      -O
	      referer = "http://nowhereatall.com/"
	      # --- End of example file ---

	      This  option  can be used multiple times to load multiple config
	      files.

       --keepalive-time <seconds>
	      This option sets the time a  connection  needs  to  remain  idle
	      before  sending keepalive probes and the time between individual
	      keepalive probes. It is currently effective on operating systems
	      offering	the  TCP_KEEPIDLE  and	TCP_KEEPINTVL  socket  options
	      (meaning Linux, recent AIX, HP-UX and more). This option has  no
	      effect if --no-keepalive is used. (Added in 7.18.0)

	      If  this option is used multiple times, the last occurrence sets
	      the amount. If unspecified, the option defaults to 60 seconds.

       --key <key>
	      (SSL/SSH) Private key file name. Allows you to provide your pri‐
	      vate key in this separate file.

	      If this option is used several times, the last one will be used.

       --key-type <type>
	      (SSL)  Private key file type. Specify which type your --key pro‐
	      vided private key is. DER, PEM, and ENG are  supported.  If  not
	      specified, PEM is assumed.

	      If this option is used several times, the last one will be used.

       --krb <level>
	      (FTP)  Enable Kerberos authentication and use. The level must be
	      entered and should be one of 'clear', 'safe', 'confidential', or
	      'private'.  Should  you  use  a  level that is not one of these,
	      'private' will instead be used.

	      This option requires a library built with	 kerberos4  or	GSSAPI
	      (GSS-Negotiate) support. This is not very common. Use -V, --ver‐
	      sion to see if your curl supports it.

	      If this option is used several times, the last one will be used.

       -l, --list-only
	      (FTP) When listing an FTP directory, this switch forces a	 name-
	      only  view.   Especially useful if you want to machine-parse the
	      contents of an FTP directory since  the  normal  directory  view
	      doesn't use a standard look or format.

	      This  option  causes  an	FTP NLST command to be sent.  Some FTP
	      servers list only files in their response to NLST; they  do  not
	      include subdirectories and symbolic links.

       -L, --location
	      (HTTP/HTTPS)  If	the server reports that the requested page has
	      moved to a different location (indicated with a Location: header
	      and  a  3XX  response code), this option will make curl redo the
	      request on the new place. If used together with -i, --include or
	      -I, --head, headers from all requested pages will be shown. When
	      authentication is used, curl only sends its credentials  to  the
	      initial  host.  If a redirect takes curl to a different host, it
	      won't be able to intercept the user+password. See	 also  --loca‐
	      tion-trusted  on how to change this. You can limit the amount of
	      redirects to follow by using the --max-redirs option.

	      When curl follows a redirect and the request is not a plain  GET
	      (for example POST or PUT), it will do the following request with
	      a GET if the HTTP response was 301, 302, or 303. If the response
	      code  was	 any  other  3xx code, curl will re-send the following
	      request using the same unmodified method.

       --libcurl <file>
	      Append this option to any ordinary curl command  line,  and  you
	      will  get a libcurl-using C source code written to the file that
	      does the equivalent of what your command-line operation does!

	      If this option is used several times, the last given  file  name
	      will be used. (Added in 7.16.1)

       --limit-rate <speed>
	      Specify  the  maximum  transfer  rate you want curl to use. This
	      feature is useful if you have a limited pipe and you'd like your
	      transfer not to use your entire bandwidth.

	      The  given speed is measured in bytes/second, unless a suffix is
	      appended.	 Appending 'k' or 'K' will count the number  as	 kilo‐
	      bytes,  'm'  or M' makes it megabytes, while 'g' or 'G' makes it
	      gigabytes. Examples: 200K, 3m and 1G.

	      The given rate is the average speed counted  during  the	entire
	      transfer. It means that curl might use higher transfer speeds in
	      short bursts, but over time it uses no more than the given rate.

	      If you also use the -Y, --speed-limit option, that  option  will
	      take precedence and might cripple the rate-limiting slightly, to
	      help keeping the speed-limit logic working.

	      If this option is used several times, the last one will be used.

       --local-port <num>[-num]
	      Set a preferred number or range of local port numbers to use for
	      the  connection(s).   Note  that	port  numbers  by nature are a
	      scarce resource that will be busy at times so setting this range
	      to something too narrow might cause unnecessary connection setup
	      failures. (Added in 7.15.2)

       --location-trusted
	      (HTTP/HTTPS) Like -L, --location, but  will  allow  sending  the
	      name + password to all hosts that the site may redirect to. This
	      may or may not introduce a security breach if the site redirects
	      you  to  a  site	to  which you'll send your authentication info
	      (which is plaintext in the case of HTTP Basic authentication).

       -m, --max-time <seconds>
	      Maximum time in seconds that you allow the  whole	 operation  to
	      take.   This is useful for preventing your batch jobs from hang‐
	      ing for hours due to slow networks or  links  going  down.   See
	      also the --connect-timeout option.

	      If this option is used several times, the last one will be used.

       --mail-auth <address>
	      (SMTP)  Specify  a  single address. This will be used to specify
	      the authentication address (identity)  of	 a  submitted  message
	      that is being relayed to another server.

	      (Added in 7.25.0)

       --mail-from <address>
	      (SMTP)  Specify  a single address that the given mail should get
	      sent from.

	      (Added in 7.20.0)

       --max-filesize <bytes>
	      Specify the maximum size (in bytes) of a file  to	 download.  If
	      the  file requested is larger than this value, the transfer will
	      not start and curl will return with exit code 63.

	      NOTE: The file size is not always known prior to	download,  and
	      for such files this option has no effect even if the file trans‐
	      fer ends up being larger than this given	limit.	This  concerns
	      both FTP and HTTP transfers.

       --mail-rcpt <address>
	      (SMTP)  Specify  a single address that the given mail should get
	      sent to. This option can be used multiple times to specify  many
	      recipients.

	      (Added in 7.20.0)

       --max-redirs <num>
	      Set  maximum  number  of	redirection-followings allowed. If -L,
	      --location is used, this option can be used to prevent curl from
	      following	 redirections  "in absurdum". By default, the limit is
	      set to 50 redirections. Set this option to -1 to make it	limit‐
	      less.

	      If this option is used several times, the last one will be used.

       -n, --netrc
	      Makes  curl  scan	 the  .netrc  (_netrc  on Windows) file in the
	      user's home directory for login name and password. This is typi‐
	      cally  used for FTP on UNIX. If used with HTTP, curl will enable
	      user authentication. See netrc(4) or ftp(1) for details  on  the
	      file  format.  Curl  will not complain if that file doesn't have
	      the right permissions (it should not be either world- or	group-
	      readable).  The  environment variable "HOME" is used to find the
	      home directory.

	      A quick and very simple example of how  to  setup	 a  .netrc  to
	      allow  curl to FTP to the machine host.domain.com with user name
	      'myself' and password 'secret' should look similar to:

	      machine host.domain.com login myself password secret

       -N, --no-buffer
	      Disables the buffering of the output stream. In normal work sit‐
	      uations,	curl  will  use a standard buffered output stream that
	      will have the effect that it will output the data in chunks, not
	      necessarily  exactly  when  the data arrives.  Using this option
	      will disable that buffering.

	      Note that this is the negated option name	 documented.  You  can
	      thus use --buffer to enforce the buffering.

       --netrc-file
	      This  option  is similar to --netrc, except that you provide the
	      path (absolute or relative) to the netrc file that  Curl	should
	      use.   You  can  only  specify one netrc file per invocation. If
	      several --netrc-file options are provided,  only	the  last  one
	      will be used.  (Added in 7.21.5)

	      This  option  overrides  any use of --netrc as they are mutually
	      exclusive.  It will also abide by --netrc-optional if specified.

       --netrc-optional
	      Very similar to --netrc, but this option makes the .netrc	 usage
	      optional and not mandatory as the --netrc option does.

       --negotiate
	      (HTTP)  Enables  GSS-Negotiate authentication. The GSS-Negotiate
	      method was designed by Microsoft and is used in their web appli‐
	      cations.	It  is	primarily  meant  as  a	 support for Kerberos5
	      authentication but may be also used along with another authenti‐
	      cation method. For more information see IETF draft draft-brezak-
	      spnego-http-04.txt.

	      If you want to enable Negotiate for your	proxy  authentication,
	      then use --proxy-negotiate.

	      This  option  requires a library built with GSSAPI support. This
	      is not very common. Use -V, --version to	see  if	 your  version
	      supports GSS-Negotiate.

	      When  using this option, you must also provide a fake -u, --user
	      option to activate the authentication code properly.  Sending  a
	      '-u  :'  is  enough  as  the  user name and password from the -u
	      option aren't actually used.

	      If this option is used several times, the following  occurrences
	      make no difference.

       --no-keepalive
	      Disables the use of keepalive messages on the TCP connection, as
	      by default curl enables them.

	      Note that this is the negated option name	 documented.  You  can
	      thus use --keepalive to enforce keepalive.

       --no-sessionid
	      (SSL)  Disable curl's use of SSL session-ID caching.  By default
	      all transfers are done using the cache. Note that while  nothing
	      should  ever  get	 hurt  by attempting to reuse SSL session-IDs,
	      there seem to be broken SSL implementations in the wild that may
	      require  you to disable this in order for you to succeed. (Added
	      in 7.16.0)

	      Note that this is the negated option name	 documented.  You  can
	      thus use --sessionid to enforce session-ID caching.

       --noproxy <no-proxy-list>
	      Comma-separated  list  of hosts which do not use a proxy, if one
	      is specified.  The only wildcard is a single * character,	 which
	      matches all hosts, and effectively disables the proxy. Each name
	      in this list is matched as either a domain  which	 contains  the
	      hostname,	 or  the hostname itself. For example, local.com would
	      match  local.com,	 local.com:80,	and  www.local.com,  but   not
	      www.notlocal.com.	 (Added in 7.19.4).

       --ntlm (HTTP)  Enables  NTLM  authentication.  The  NTLM authentication
	      method was designed by Microsoft and is used by IIS web servers.
	      It  is a proprietary protocol, reverse-engineered by clever peo‐
	      ple and implemented in curl based on their efforts. This kind of
	      behavior	should	not be endorsed, you should encourage everyone
	      who uses NTLM to switch to a public and  documented  authentica‐
	      tion method instead, such as Digest.

	      If  you  want to enable NTLM for your proxy authentication, then
	      use --proxy-ntlm.

	      This option requires a library built with SSL support.  Use  -V,
	      --version to see if your curl supports NTLM.

	      If  this option is used several times, the following occurrences
	      make no difference.

       -o, --output <file>
	      Write output to <file> instead of stdout. If you are using {} or
	      []  to  fetch  multiple documents, you can use '#' followed by a
	      number in the <file> specifier. That variable will  be  replaced
	      with the current string for the URL being fetched. Like in:

		curl http://{one,two}.site.com -o "file_#1.txt"

	      or use several variables like:

		curl http://{site,host}.host[1-5].com -o "#1_#2"

	      You  may use this option as many times as the number of URLs you
	      have.

	      See also the --create-dirs option to create the  local  directo‐
	      ries  dynamically.  Specifying the output as '-' (a single dash)
	      will force the output to be done to stdout.

       -O, --remote-name
	      Write output to a local file named like the remote file we  get.
	      (Only  the file part of the remote file is used, the path is cut
	      off.)

	      The remote file name to use for saving  is  extracted  from  the
	      given URL, nothing else.

	      Consequentially,	the  file will be saved in the current working
	      directory. If you want the file saved in a different  directory,
	      make sure you change current working directory before you invoke
	      curl with the -O, --remote-name flag!

	      You may use this option as many times as the number of URLs  you
	      have.

       -p, --proxytunnel
	      When an HTTP proxy is used (-x, --proxy), this option will cause
	      non-HTTP protocols  to  attempt  to  tunnel  through  the	 proxy
	      instead  of merely using it to do HTTP-like operations. The tun‐
	      nel approach is made with the HTTP  proxy	 CONNECT  request  and
	      requires that the proxy allows direct connect to the remote port
	      number curl wants to tunnel through to.

       -P, --ftp-port <address>
	      (FTP) Reverses the default initiator/listener  roles  when  con‐
	      necting  with  FTP.  This	 switch makes curl use active mode. In
	      practice, curl then tells the server  to	connect	 back  to  the
	      client's specified address and port, while passive mode asks the
	      server to setup an IP address and port for  it  to  connect  to.
	      <address> should be one of:

	      interface
		     i.e  "eth0"  to  specify which interface's IP address you
		     want to use (Unix only)

	      IP address
		     i.e "192.168.10.1" to specify the exact IP address

	      host name
		     i.e "my.host.domain" to specify the machine

	      -	     make curl pick the same IP address that is	 already  used
		     for the control connection

       If  this	 option is used several times, the last one will be used. Dis‐
       able the use of PORT with --ftp-pasv. Disable the attempt  to  use  the
       EPRT  command  instead  of PORT by using --disable-eprt. EPRT is really
       PORT++.

       Starting in 7.19.5, you can append ":[start]-[end]" to the right of the
       address,	 to tell curl what TCP port range to use. That means you spec‐
       ify a port range, from a lower to a  higher  number.  A	single	number
       works  as well, but do note that it increases the risk of failure since
       the port may not be available.

       --pass <phrase>
	      (SSL/SSH) Passphrase for the private key

	      If this option is used several times, the last one will be used.

       --post301
	      Tells curl to respect  RFC  2616/10.3.2  and  not	 convert  POST
	      requests into GET requests when following a 301 redirection. The
	      non-RFC behaviour is ubiquitous in web browsers,	so  curl  does
	      the  conversion  by  default to maintain consistency. However, a
	      server may require a POST to remain a POST after	such  a	 redi‐
	      rection.	This  option is meaningful only when using -L, --loca‐
	      tion (Added in 7.17.1)

       --post302
	      Tells curl to respect  RFC  2616/10.3.2  and  not	 convert  POST
	      requests into GET requests when following a 302 redirection. The
	      non-RFC behaviour is ubiquitous in web browsers,	so  curl  does
	      the  conversion  by  default to maintain consistency. However, a
	      server may require a POST to remain a POST after	such  a	 redi‐
	      rection.	This  option is meaningful only when using -L, --loca‐
	      tion (Added in 7.19.1)

       --proto <protocols>
	      Tells  curl  to  use  the	 listed	 protocols  for	 its   initial
	      retrieval. Protocols are evaluated left to right, are comma sep‐
	      arated, and are each a protocol name or 'all',  optionally  pre‐
	      fixed by zero or more modifiers. Available modifiers are:

	      +	 Permit this protocol in addition to protocols already permit‐
		 ted (this is the default if no modifier is used).

	      -	 Deny this protocol, removing it from the  list	 of  protocols
		 already permitted.

	      =	 Permit	 only this protocol (ignoring the list already permit‐
		 ted), though subject  to  later  modification	by  subsequent
		 entries in the comma separated list.

	      For example:

	      --proto -ftps  uses the default protocols, but disables ftps

	      --proto -all,https,+http
			     only enables http and https

	      --proto =http,https
			     also only enables http and https

	      Unknown  protocols  produce  a  warning.	This allows scripts to
	      safely rely on being able to disable potentially dangerous  pro‐
	      tocols,  without	relying	 upon  support for that protocol being
	      built into curl to avoid an error.

	      This option can be used multiple times, in which case the effect
	      is  the same as concatenating the protocols into one instance of
	      the option.

	      (Added in 7.20.2)

       --proto-redir <protocols>
	      Tells curl to use the listed protocols  after  a	redirect.  See
	      --proto for how protocols are represented.

	      (Added in 7.20.2)

       --proxy-anyauth
	      Tells  curl to pick a suitable authentication method when commu‐
	      nicating with  the  given	 proxy.	 This  might  cause  an	 extra
	      request/response round-trip. (Added in 7.13.2)

       --proxy-basic
	      Tells  curl  to use HTTP Basic authentication when communicating
	      with the given proxy. Use --basic for enabling HTTP Basic with a
	      remote  host.  Basic  is	the default authentication method curl
	      uses with proxies.

       --proxy-digest
	      Tells curl to use HTTP Digest authentication when	 communicating
	      with the given proxy. Use --digest for enabling HTTP Digest with
	      a remote host.

       --proxy-negotiate
	      Tells curl to use HTTP Negotiate authentication when communicat‐
	      ing  with	 the  given  proxy.  Use --negotiate for enabling HTTP
	      Negotiate with a remote host. (Added in 7.17.1)

       --proxy-ntlm
	      Tells curl to use HTTP NTLM  authentication  when	 communicating
	      with the given proxy. Use --ntlm for enabling NTLM with a remote
	      host.

       --proxy1.0 <proxyhost[:port]>
	      Use the specified HTTP 1.0 proxy. If  the	 port  number  is  not
	      specified, it is assumed at port 1080.

	      The  only difference between this and the HTTP proxy option (-x,
	      --proxy), is that attempts to use CONNECT through the proxy will
	      specify an HTTP 1.0 protocol instead of the default HTTP 1.1.

       --pubkey <key>
	      (SSH)  Public  key  file name. Allows you to provide your public
	      key in this separate file.

	      If this option is used several times, the last one will be used.

       -q     If used as the first parameter on the command line,  the	curlrc
	      config  file will not be read and used. See the -K, --config for
	      details on the default config file search path.

       -Q, --quote <command>
	      (FTP/SFTP) Send an arbitrary command to the remote FTP  or  SFTP
	      server.  Quote commands are sent BEFORE the transfer takes place
	      (just after the initial PWD command in an FTP  transfer,	to  be
	      exact). To make commands take place after a successful transfer,
	      prefix them with a dash '-'.  To make  commands  be  sent	 after
	      libcurl  has  changed  the  working  directory,  just before the
	      transfer command(s), prefix the command with a '+' (this is only
	      supported	 for  FTP). You may specify any number of commands. If
	      the server returns failure for one of the commands,  the	entire
	      operation	 will  be aborted. You must send syntactically correct
	      FTP commands as RFC 959 defines to FTP servers, or  one  of  the
	      commands	listed below to SFTP servers.  This option can be used
	      multiple times. When speaking to a FTP server, prefix  the  com‐
	      mand  with  an asterisk (*) to make libcurl continue even if the
	      command fails as by default curl will stop at first failure.

	      SFTP is a binary protocol. Unlike for  FTP,  libcurl  interprets
	      SFTP  quote  commands  itself before sending them to the server.
	      File names may be quoted shell-style to embed spaces or  special
	      characters.   Following  is the list of all supported SFTP quote
	      commands:

	      chgrp group file
		     The chgrp command sets the group ID of the file named  by
		     the  file	operand to the group ID specified by the group
		     operand. The group operand is a decimal integer group ID.

	      chmod mode file
		     The chmod command modifies the  file  mode	 bits  of  the
		     specified file. The mode operand is an octal integer mode
		     number.

	      chown user file
		     The chown command sets the owner of the file named by the
		     file  operand  to the user ID specified by the user oper‐
		     and. The user operand is a decimal integer user ID.

	      ln source_file target_file
		     The ln and symlink commands create a symbolic link at the
		     target_file  location  pointing  to the source_file loca‐
		     tion.

	      mkdir directory_name
		     The mkdir command creates	the  directory	named  by  the
		     directory_name operand.

	      pwd    The pwd command returns the absolute pathname of the cur‐
		     rent working directory.

	      rename source target
		     The rename command renames the file or directory named by
		     the  source  operand to the destination path named by the
		     target operand.

	      rm file
		     The rm command removes the file specified by the file op‐
		     erand.

	      rmdir directory
		     The  rmdir	 command removes the directory entry specified
		     by the directory operand, provided it is empty.

	      symlink source_file target_file
		     See ln.

       -r, --range <range>
	      (HTTP/FTP/SFTP/FILE) Retrieve a byte range (i.e a partial	 docu‐
	      ment)  from  a  HTTP/1.1,	 FTP  or  SFTP server or a local FILE.
	      Ranges can be specified in a number of ways.

	      0-499	specifies the first 500 bytes

	      500-999	specifies the second 500 bytes

	      -500	specifies the last 500 bytes

	      9500-	specifies the bytes from offset 9500 and forward

	      0-0,-1	specifies the first and last byte only(*)(H)

	      500-700,600-799
			specifies 300 bytes from offset 500(H)

	      100-199,500-599
			specifies two separate 100-byte ranges(*)(H)

       (*) = NOTE that this will cause the server to reply  with  a  multipart
       response!

       Only  digit characters (0-9) are valid in the 'start' and 'stop' fields
       of the 'start-stop' range syntax. If a non-digit character is given  in
       the  range, the server's response will be unspecified, depending on the
       server's configuration.

       You should also be aware that many HTTP/1.1 servers do  not  have  this
       feature	enabled,  so  that  when  you  attempt	to get a range, you'll
       instead get the whole document.

       FTP and SFTP range downloads only support the simple 'start-stop'  syn‐
       tax  (optionally	 with  one of the numbers omitted). FTP use depends on
       the extended FTP command SIZE.

       If this option is used several times, the last one will be used.

       -R, --remote-time
	      When used, this will make libcurl	 attempt  to  figure  out  the
	      timestamp	 of the remote file, and if that is available make the
	      local file get that same timestamp.

       --random-file <file>
	      (SSL) Specify the path name to file containing what will be con‐
	      sidered  as  random  data.  The  data is used to seed the random
	      engine for SSL connections.  See also the --egd-file option.

       --raw  When used, it disables all internal HTTP decoding of content  or
	      transfer	encodings  and instead makes them passed on unaltered,
	      raw. (Added in 7.16.2)

       --remote-name-all
	      This option changes the default action for all given URLs to  be
	      dealt with as if -O, --remote-name were used for each one. So if
	      you want to disable that for a specific URL after --remote-name-
	      all  has	been  used,  you  must use "-o -" or --no-remote-name.
	      (Added in 7.19.0)

       --resolve <host:port:address>
	      Provide a custom address for a  specific	host  and  port	 pair.
	      Using  this,  you	 can make the curl requests(s) use a specified
	      address and prevent the otherwise normally resolved  address  to
	      be  used.	 Consider it a sort of /etc/hosts alternative provided
	      on the command line. The port number should be the  number  used
	      for  the	specific  protocol the host will be used for. It means
	      you need several entries if you want to provide address for  the
	      same host but different ports.

	      This  option  can	 be  used many times to add many host names to
	      resolve.

	      (Added in 7.21.3)

       --retry <num>
	      If a transient error is returned when curl tries	to  perform  a
	      transfer,	 it  will retry this number of times before giving up.
	      Setting the number to 0 makes curl do no retries (which  is  the
	      default).	 Transient  error  means either: a timeout, an FTP 4xx
	      response code or an HTTP 5xx response code.

	      When curl is about to retry a transfer, it will first  wait  one
	      second  and  then for all forthcoming retries it will double the
	      waiting time until it reaches 10 minutes which then will be  the
	      delay  between  the rest of the retries.	By using --retry-delay
	      you  disable  this  exponential  backoff	algorithm.  See	  also
	      --retry-max-time	to  limit  the total time allowed for retries.
	      (Added in 7.12.3)

	      If this option is	 used  multiple	 times,	 the  last  occurrence
	      decide the amount.

       --retry-delay <seconds>
	      Make  curl  sleep	 this  amount of time before each retry when a
	      transfer has failed with	a  transient  error  (it  changes  the
	      default  backoff time algorithm between retries). This option is
	      only interesting if --retry is also used. Setting this delay  to
	      zero  will  make	curl  use the default backoff time.  (Added in
	      7.12.3)

	      If this option is	 used  multiple	 times,	 the  last  occurrence
	      determines the amount.

       --retry-max-time <seconds>
	      The  retry  timer	 is  reset  before the first transfer attempt.
	      Retries will be done as usual (see --retry) as long as the timer
	      hasn't reached this given limit. Notice that if the timer hasn't
	      reached the limit, the request will be made and  while  perform‐
	      ing,  it may take longer than this given time period. To limit a
	      single request´s maximum time, use  -m,  --max-time.   Set  this
	      option to zero to not timeout retries. (Added in 7.12.3)

	      If  this	option	is  used  multiple  times, the last occurrence
	      determines the amount.

       -s, --silent
	      Silent or quiet mode. Don't show progress meter  or  error  mes‐
	      sages.  Makes Curl mute.

       -S, --show-error
	      When  used  with	-s  it	makes curl show an error message if it
	      fails.

       --ssl  (FTP, POP3, IMAP, SMTP) Try to use SSL/TLS for  the  connection.
	      Reverts to a non-secure connection if the server doesn't support
	      SSL/TLS.	See also --ftp-ssl-control and --ssl-reqd for  differ‐
	      ent levels of encryption required. (Added in 7.20.0)

	      This  option  was formerly known as --ftp-ssl (Added in 7.11.0).
	      That option name can still be used but  will  be	removed	 in  a
	      future version.

       --ssl-reqd
	      (FTP,  POP3,  IMAP,  SMTP)  Require  SSL/TLS for the connection.
	      Terminates the connection if the server doesn't support SSL/TLS.
	      (Added in 7.20.0)

	      This  option  was	 formerly  known  as  --ftp-ssl-reqd (added in
	      7.15.5). That option name can still be used but will be  removed
	      in a future version.

       --ssl-allow-beast
	      (SSL)  This option tells curl to not work around a security flaw
	      in the SSL3 and TLS1.0 protocols known as BEAST.	If this option
	      isn't  used,  the	 SSL layer may use work-arounds known to cause
	      interoperability problems with some older	 SSL  implementations.
	      WARNING: this option loosens the SSL security, and by using this
	      flag you ask for exactly that.  (Added in 7.25.0)

       --socks4 <host[:port]>
	      Use the specified SOCKS4 proxy. If the port number is not speci‐
	      fied, it is assumed at port 1080. (Added in 7.15.2)

	      This  option  overrides any previous use of -x, --proxy, as they
	      are mutually exclusive.

	      Since 7.21.7, this option is superfluous since you can specify a
	      socks4 proxy with -x, --proxy using a socks4:// protocol prefix.

	      If this option is used several times, the last one will be used.

       --socks4a <host[:port]>
	      Use the specified SOCKS4a proxy. If the port number is not spec‐
	      ified, it is assumed at port 1080. (Added in 7.18.0)

	      This option overrides any previous use of -x, --proxy,  as  they
	      are mutually exclusive.

	      Since 7.21.7, this option is superfluous since you can specify a
	      socks4a proxy with -x, --proxy using a socks4a:// protocol  pre‐
	      fix.

	      If this option is used several times, the last one will be used.

       --socks5-hostname <host[:port]>
	      Use  the	specified  SOCKS5 proxy (and let the proxy resolve the
	      host name). If the port number is not specified, it  is  assumed
	      at port 1080. (Added in 7.18.0)

	      This  option  overrides any previous use of -x, --proxy, as they
	      are mutually exclusive.

	      Since 7.21.7, this option is superfluous since you can specify a
	      socks5 hostname proxy with -x, --proxy using a socks5h:// proto‐
	      col prefix.

	      If this option is used several times, the last one will be used.
	      (This  option  was  previously  wrongly  documented  and used as
	      --socks without the number appended.)

       --socks5 <host[:port]>
	      Use the specified SOCKS5 proxy  -	 but  resolve  the  host  name
	      locally.	If  the port number is not specified, it is assumed at
	      port 1080.

	      This option overrides any previous use of -x, --proxy,  as  they
	      are mutually exclusive.

	      Since 7.21.7, this option is superfluous since you can specify a
	      socks5 proxy with -x, --proxy using a socks5:// protocol prefix.

	      If this option is used several times, the last one will be used.
	      (This  option  was  previously  wrongly  documented  and used as
	      --socks without the number appended.)

	      This option (as well as --socks4) does not work with IPV6,  FTPS
	      or LDAP.

       --socks5-gssapi-service <servicename>
	      The default service name for a socks server is rcmd/server-fqdn.
	      This option allows you to change it.

	      Examples:	 --socks5  proxy-name  --socks5-gssapi-service	 sockd
	      would  use sockd/proxy-name --socks5 proxy-name --socks5-gssapi-
	      service sockd/real-name  would  use  sockd/real-name  for	 cases
	      where  the proxy-name does not match the principal name.	(Added
	      in 7.19.4).

       --socks5-gssapi-nec
	      As part of the gssapi negotiation a protection mode  is  negoti‐
	      ated.  RFC  1961 says in section 4.3/4.4 it should be protected,
	      but the NEC  reference  implementation  does  not.   The	option
	      --socks5-gssapi-nec  allows the unprotected exchange of the pro‐
	      tection mode negotiation. (Added in 7.19.4).

       --stderr <file>
	      Redirect all writes to stderr to the specified file instead.  If
	      the file name is a plain '-', it is instead written to stdout.

	      If this option is used several times, the last one will be used.

       -t, --telnet-option <OPT=val>
	      Pass options to the telnet protocol. Supported options are:

	      TTYPE=<term> Sets the terminal type.

	      XDISPLOC=<X display> Sets the X display location.

	      NEW_ENV=<var,val> Sets an environment variable.

       -T, --upload-file <file>
	      This  transfers  the  specified local file to the remote URL. If
	      there is no file part in the specified URL, Curl will append the
	      local file name. NOTE that you must use a trailing / on the last
	      directory to really prove to Curl that there is no file name  or
	      curl will think that your last directory name is the remote file
	      name to use. That will most likely cause the upload operation to
	      fail.  If this is used on a HTTP(S) server, the PUT command will
	      be used.

	      Use the file name "-" (a single dash) to use stdin instead of  a
	      given  file.   Alternately,  the file name "." (a single period)
	      may be specified instead of "-" to  use  stdin  in  non-blocking
	      mode  to	allow  reading	server	output	while  stdin  is being
	      uploaded.

	      You can specify one -T for each URL on the command line. Each -T
	      + URL pair specifies what to upload and to where. curl also sup‐
	      ports "globbing" of the -T argument, meaning that you can upload
	      multiple	files  to  a single URL by using the same URL globbing
	      style supported in the URL, like this:

	      curl -T "{file1,file2}" http://www.uploadtothissite.com

	      or even

	      curl -T "img[1-1000].png" ftp://ftp.picturemania.com/upload/

       --tcp-nodelay
	      Turn on the TCP_NODELAY option. See the curl_easy_setopt(3)  man
	      page for details about this option. (Added in 7.11.2)

       --tftp-blksize <value>
	      (TFTP) Set TFTP BLKSIZE option (must be >512). This is the block
	      size that curl will try to use when transferring data to or from
	      a TFTP server. By default 512 bytes will be used.

	      If this option is used several times, the last one will be used.

	      (Added in 7.20.0)

       --tlsauthtype <authtype>
	      Set  TLS	authentication	type.  Currently,  the	only supported
	      option is "SRP",	for  TLS-SRP  (RFC  5054).  If	--tlsuser  and
	      --tlspassword  are specified but --tlsauthtype is not, then this
	      option defaults to "SRP".	 (Added in 7.21.4)

       --tlsuser <user>
	      Set username for use with the TLS authentication	method	speci‐
	      fied  with  --tlsauthtype.  Requires  that --tlspassword also be
	      set.  (Added in 7.21.4)

       --tlspassword <password>
	      Set password for use with the TLS authentication	method	speci‐
	      fied  with  --tlsauthtype.  Requires that --tlsuser also be set.
	      (Added in 7.21.4)

       --tr-encoding
	      (HTTP) Request a compressed Transfer-Encoding response using one
	      of  the  algorithms  libcurl  supports,  and uncompress the data
	      while receiving it.

	      (Added in 7.21.6)

       --trace <file>
	      Enables a full trace dump of all	incoming  and  outgoing	 data,
	      including descriptive information, to the given output file. Use
	      "-" as filename to have the output sent to stdout.

	      This option overrides previous uses of -v, --verbose or --trace-
	      ascii.

	      If this option is used several times, the last one will be used.

       --trace-ascii <file>
	      Enables  a  full	trace  dump of all incoming and outgoing data,
	      including descriptive information, to the given output file. Use
	      "-" as filename to have the output sent to stdout.

	      This is very similar to --trace, but leaves out the hex part and
	      only shows the ASCII part of the dump. It makes  smaller	output
	      that might be easier to read for untrained humans.

	      This option overrides previous uses of -v, --verbose or --trace.

	      If this option is used several times, the last one will be used.

       --trace-time
	      Prepends	a  time	 stamp to each trace or verbose line that curl
	      displays.	 (Added in 7.14.0)

       -u, --user <user:password>
	      Specify the user name and password to use for server authentica‐
	      tion. Overrides -n, --netrc and --netrc-optional.

	      If  you  just give the user name (without entering a colon) curl
	      will prompt for a password.

	      If you use an SSPI-enabled curl binary and do  NTLM  authentica‐
	      tion,  you  can force curl to pick up the user name and password
	      from your environment by simply specifying a single  colon  with
	      this option: "-u :".

	      If this option is used several times, the last one will be used.

       -U, --proxy-user <user:password>
	      Specify  the user name and password to use for proxy authentica‐
	      tion.

	      If you use an SSPI-enabled curl binary and do  NTLM  authentica‐
	      tion,  you  can force curl to pick up the user name and password
	      from your environment by simply specifying a single  colon  with
	      this option: "-U :".

	      If this option is used several times, the last one will be used.

       --url <URL>
	      Specify  a  URL  to  fetch. This option is mostly handy when you
	      want to specify URL(s) in a config file.

	      This option may be used any number of times.  To	control	 where
	      this  URL	 is written, use the -o, --output or the -O, --remote-
	      name options.

       -v, --verbose
	      Makes the fetching more  verbose/talkative.  Mostly  useful  for
	      debugging.  A line starting with '>' means "header data" sent by
	      curl, '<' means "header data" received by curl that is hidden in
	      normal cases, and a line starting with '*' means additional info
	      provided by curl.

	      Note that if you only want  HTTP	headers	 in  the  output,  -i,
	      --include might be the option you're looking for.

	      If  you think this option still doesn't give you enough details,
	      consider using --trace or --trace-ascii instead.

	      This option overrides previous uses of --trace-ascii or --trace.

	      Use -s, --silent to make curl quiet.

       -w, --write-out <format>
	      Defines what to display on stdout after a completed and success‐
	      ful  operation.  The  format  is a string that may contain plain
	      text mixed with any number of variables. The string can be spec‐
	      ified  as "string", to get read from a particular file you spec‐
	      ify it "@filename" and to tell curl  to  read  the  format  from
	      stdin you write "@-".

	      The  variables  present in the output format will be substituted
	      by the value or text that curl thinks fit, as  described	below.
	      All  variables are specified as %{variable_name} and to output a
	      normal % you just write them as %%. You can output a newline  by
	      using \n, a carriage return with \r and a tab space with \t.

	      NOTE: The %-symbol is a special symbol in the win32-environment,
	      where all occurrences of %  must	be  doubled  when  using  this
	      option.

	      The variables available at this point are:

	      url_effective  The URL that was fetched last. This is most mean‐
			     ingful if you've told curl	 to  follow  location:
			     headers.

	      filename_effective
			     The  ultimate  filename  that curl writes out to.
			     This is only meaningful if curl is told to	 write
			     to	 a  file  with	the  --remote-name or --output
			     option. It's most useful in combination with  the
			     --remote-header-name option. (Added in 7.25.1)

	      http_code	     The numerical response code that was found in the
			     last retrieved HTTP(S)  or	 FTP(s)	 transfer.  In
			     7.18.2  the alias response_code was added to show
			     the same info.

	      http_connect   The numerical code that was  found	 in  the  last
			     response	(from  a  proxy)  to  a	 curl  CONNECT
			     request. (Added in 7.12.4)

	      time_total     The total time, in seconds, that the full	opera‐
			     tion lasted. The time will be displayed with mil‐
			     lisecond resolution.

	      time_namelookup
			     The time, in seconds,  it	took  from  the	 start
			     until the name resolving was completed.

	      time_connect   The  time,	 in  seconds,  it  took from the start
			     until the TCP connect  to	the  remote  host  (or
			     proxy) was completed.

	      time_appconnect
			     The  time,	 in  seconds,  it  took from the start
			     until the SSL/SSH/etc  connect/handshake  to  the
			     remote host was completed. (Added in 7.19.0)

	      time_pretransfer
			     The  time,	 in  seconds,  it  took from the start
			     until the file transfer was just about to	begin.
			     This includes all pre-transfer commands and nego‐
			     tiations that are specific to the particular pro‐
			     tocol(s) involved.

	      time_redirect  The time, in seconds, it took for all redirection
			     steps include name lookup,	 connect,  pretransfer
			     and  transfer  before  the	 final transaction was
			     started. time_redirect shows the complete	execu‐
			     tion  time	 for  multiple redirections. (Added in
			     7.12.3)

	      time_starttransfer
			     The time, in seconds,  it	took  from  the	 start
			     until  the first byte was just about to be trans‐
			     ferred. This includes time_pretransfer  and  also
			     the  time	the  server  needed  to	 calculate the
			     result.

	      size_download  The total amount of bytes that were downloaded.

	      size_upload    The total amount of bytes that were uploaded.

	      size_header    The total amount of bytes of the downloaded head‐
			     ers.

	      size_request   The  total	 amount of bytes that were sent in the
			     HTTP request.

	      speed_download The average download speed that curl measured for
			     the complete download. Bytes per second.

	      speed_upload   The  average  upload speed that curl measured for
			     the complete upload. Bytes per second.

	      content_type   The Content-Type of the  requested	 document,  if
			     there was any.

	      num_connects   Number  of new connects made in the recent trans‐
			     fer. (Added in 7.12.3)

	      num_redirects  Number of redirects that  were  followed  in  the
			     request. (Added in 7.12.3)

	      redirect_url   When a HTTP request was made without -L to follow
			     redirects, this variable will show the actual URL
			     a redirect would take you to. (Added in 7.18.2)

	      ftp_entry_path The initial path libcurl ended up in when logging
			     on to the remote FTP server. (Added in 7.15.4)

	      ssl_verify_result
			     The result of the SSL peer certificate  verifica‐
			     tion that was requested. 0 means the verification
			     was successful. (Added in 7.19.0)

       If this option is used several times, the last one will be used.

       -x, --proxy <[protocol://][user:password@]proxyhost[:port]>
	      Use the specified HTTP proxy. If the port number is  not	speci‐
	      fied, it is assumed at port 1080.

	      This  option  overrides  existing environment variables that set
	      the proxy to use. If there's an environment variable  setting  a
	      proxy, you can set proxy to "" to override it.

	      All  operations that are performed over a HTTP proxy will trans‐
	      parently be converted to HTTP. It means  that  certain  protocol
	      specific operations might not be available. This is not the case
	      if you can tunnel through the proxy, as one with the -p, --prox‐
	      ytunnel option.

	      User and password that might be provided in the proxy string are
	      URL decoded by libcurl. This allows you to pass in special char‐
	      acters such as @ by using %40 or pass in a colon with %3a.

	      The  proxy host can be specified the exact same way as the proxy
	      environment variables, including the protocol  prefix  (http://)
	      and the embedded user + password.

	      From  7.21.7,  the  proxy	 string may be specified with a proto‐
	      col://  prefix  to  specify  alternative	proxy  protocols.  Use
	      socks4://,  socks4a://,  socks5://  or socks5h:// to request the
	      specific SOCKS  version  to  be  used.  No  protocol  specified,
	      http:// and all others will be treated as HTTP proxies.

	      If this option is used several times, the last one will be used.

       -X, --request <command>
	      (HTTP) Specifies a custom request method to use when communicat‐
	      ing with the HTTP server.	 The specified request	will  be  used
	      instead  of  the	method otherwise used (which defaults to GET).
	      Read the HTTP 1.1 specification for  details  and	 explanations.
	      Common  additional  HTTP	requests  include  PUT and DELETE, but
	      related technologies like WebDAV offers PROPFIND, COPY, MOVE and
	      more.

	      (FTP) Specifies a custom FTP command to use instead of LIST when
	      doing file lists with FTP.

	      If this option is used several times, the last one will be used.

       --xattr
	      When saving output to a file, this option tells  curl  to	 store
	      certain file metadata in extened file attributes. Currently, the
	      URL is stored in the xdg.origin.url attribute and, for HTTP, the
	      content  type  is stored in the mime_type attribute. If the file
	      system does  not	support	 extended  attributes,	a  warning  is
	      issued.

       -y, --speed-time <time>
	      If a download is slower than speed-limit bytes per second during
	      a speed-time period, the download gets aborted. If speed-time is
	      used, the default speed-limit will be 1 unless set with -Y.

	      This  option  controls  transfers	 and thus will not affect slow
	      connects etc. If this is a concern for you, try  the  --connect-
	      timeout option.

	      If this option is used several times, the last one will be used.

       -Y, --speed-limit <speed>
	      If a download is slower than this given speed (in bytes per sec‐
	      ond) for speed-time seconds it gets aborted. speed-time  is  set
	      with -y and is 30 if not set.

	      If this option is used several times, the last one will be used.

       -z/--time-cond <date expression>|<file>
	      (HTTP/FTP)  Request a file that has been modified later than the
	      given time and date, or one that has been modified  before  that
	      time.  The <date expression> can be all sorts of date strings or
	      if it doesn't match any internal ones, it is taken as a filename
	      and  tries  to  get  the	modification  date (mtime) from <file>
	      instead. See the curl_getdate(3) man pages for  date  expression
	      details.

	      Start the date expression with a dash (-) to make it request for
	      a document that is older than the given date/time, default is  a
	      document that is newer than the specified date/time.

	      If this option is used several times, the last one will be used.

       -h, --help
	      Usage help.

       -M, --manual
	      Manual. Display the huge help text.

       -V, --version
	      Displays information about curl and the libcurl version it uses.

	      The  first  line	includes the full version of curl, libcurl and
	      other 3rd party libraries linked with the executable.

	      The second line (starts with "Protocols:") shows	all  protocols
	      that libcurl reports to support.

	      The third line (starts with "Features:") shows specific features
	      libcurl reports to offer. Available features include:

	      IPv6   You can use IPv6 with this.

	      krb4   Krb4 for FTP is supported.

	      SSL    HTTPS and FTPS are supported.

	      libz   Automatic decompression of compressed files over HTTP  is
		     supported.

	      NTLM   NTLM authentication is supported.

	      GSS-Negotiate
		     Negotiate authentication and krb5 for FTP is supported.

	      Debug  This  curl	 uses a libcurl built with Debug. This enables
		     more error-tracking and memory debugging etc.  For	 curl-
		     developers only!

	      AsynchDNS
		     This curl uses asynchronous name resolves.

	      SPNEGO SPNEGO Negotiate authentication is supported.

	      Largefile
		     This curl supports transfers of large files, files larger
		     than 2GB.

	      IDN    This curl supports IDN - international domain names.

	      SSPI   SSPI is supported. If you use NTLM and set a  blank  user
		     name,  curl  will authenticate with your current user and
		     password.

	      TLS-SRP
		     SRP (Secure Remote Password) authentication is  supported
		     for TLS.

FILES
       ~/.curlrc
	      Default config file, see -K, --config for details.

ENVIRONMENT
       The environment variables can be specified in lower case or upper case.
       The lower case version has precedence. http_proxy is an exception as it
       is only available in lower case.

       Using  an  environment variable to set the proxy has the same effect as
       using the --proxy option.

       http_proxy [protocol://]<host>[:port]
	      Sets the proxy server to use for HTTP.

       HTTPS_PROXY [protocol://]<host>[:port]
	      Sets the proxy server to use for HTTPS.

       [url-protocol]_PROXY [protocol://]<host>[:port]
	      Sets the proxy server to use for [url-protocol], where the  pro‐
	      tocol  is	 a  protocol  that curl supports and as specified in a
	      URL. FTP, FTPS, POP3, IMAP, SMTP, LDAP etc.

       ALL_PROXY [protocol://]<host>[:port]
	      Sets the proxy server to use if no  protocol-specific  proxy  is
	      set.

       NO_PROXY <comma-separated list of hosts>
	      list  of	host names that shouldn't go through any proxy. If set
	      to a asterisk '*' only, it matches all hosts.

PROXY PROTOCOL PREFIXES
       Since curl version 7.21.7, the proxy string may	be  specified  with  a
       protocol:// prefix to specify alternative proxy protocols.

       If  no  protocol	 is  specified	in  the	 proxy string or if the string
       doesn't match a supported one, the proxy will  be  treated  as  a  HTTP
       proxy.

       The supported proxy protocol prefixes are as follows:

       socks4://
	      Makes it the equivalent of --socks4

       socks4a://
	      Makes it the equivalent of --socks4a

       socks5://
	      Makes it the equivalent of --socks5

       socks5h://
	      Makes it the equivalent of --socks5-hostname

EXIT CODES
       There  are  a  bunch  of	 different error codes and their corresponding
       error messages that may appear during bad conditions. At	 the  time  of
       this writing, the exit codes are:

       1      Unsupported protocol. This build of curl has no support for this
	      protocol.

       2      Failed to initialize.

       3      URL malformed. The syntax was not correct.

       4      A feature or option that	was  needed  to	 perform  the  desired
	      request  was  not	 enabled  or was explicitly disabled at build-
	      time. To make curl able to do this, you  probably	 need  another
	      build of libcurl!

       5      Couldn't	resolve	 proxy.	 The  given  proxy  host  could not be
	      resolved.

       6      Couldn't resolve host. The given remote host was not resolved.

       7      Failed to connect to host.

       8      FTP weird server reply.  The  server  sent  data	curl  couldn't
	      parse.

       9      FTP  access  denied. The server denied login or denied access to
	      the particular resource or directory you wanted to  reach.  Most
	      often  you  tried to change to a directory that doesn't exist on
	      the server.

       11     FTP weird PASS reply. Curl couldn't parse the reply sent to  the
	      PASS request.

       13     FTP  weird PASV reply, Curl couldn't parse the reply sent to the
	      PASV request.

       14     FTP weird 227 format.  Curl  couldn't  parse  the	 227-line  the
	      server sent.

       15     FTP  can't  get host. Couldn't resolve the host IP we got in the
	      227-line.

       17     FTP couldn't set binary.	Couldn't  change  transfer  method  to
	      binary.

       18     Partial file. Only a part of the file was transferred.

       19     FTP  couldn't download/access the given file, the RETR (or simi‐
	      lar) command failed.

       21     FTP quote error. A quote command returned error from the server.

       22     HTTP page not retrieved. The requested  url  was	not  found  or
	      returned	another	 error	with  the HTTP error code being 400 or
	      above. This return code only appears if -f, --fail is used.

       23     Write error. Curl couldn't write data to a local	filesystem  or
	      similar.

       25     FTP  couldn't  STOR  file. The server denied the STOR operation,
	      used for FTP uploading.

       26     Read error. Various reading problems.

       27     Out of memory. A memory allocation request failed.

       28     Operation timeout. The specified	time-out  period  was  reached
	      according to the conditions.

       30     FTP  PORT	 failed.  The PORT command failed. Not all FTP servers
	      support the PORT	command,  try  doing  a	 transfer  using  PASV
	      instead!

       31     FTP  couldn't use REST. The REST command failed. This command is
	      used for resumed FTP transfers.

       33     HTTP range error. The range "command" didn't work.

       34     HTTP post error. Internal post-request generation error.

       35     SSL connect error. The SSL handshaking failed.

       36     FTP bad download resume. Couldn't continue  an  earlier  aborted
	      download.

       37     FILE couldn't read file. Failed to open the file. Permissions?

       38     LDAP cannot bind. LDAP bind operation failed.

       39     LDAP search failed.

       41     Function not found. A required LDAP function was not found.

       42     Aborted by callback. An application told curl to abort the oper‐
	      ation.

       43     Internal error. A function was called with a bad parameter.

       45     Interface error. A specified outgoing  interface	could  not  be
	      used.

       47     Too many redirects. When following redirects, curl hit the maxi‐
	      mum amount.

       48     Unknown option specified to libcurl.  This  indicates  that  you
	      passed  a weird option to curl that was passed on to libcurl and
	      rejected. Read up in the manual!

       49     Malformed telnet option.

       51     The peer's SSL certificate or SSH MD5 fingerprint was not OK.

       52     The server didn't reply anything, which here  is	considered  an
	      error.

       53     SSL crypto engine not found.

       54     Cannot set SSL crypto engine as default.

       55     Failed sending network data.

       56     Failure in receiving network data.

       58     Problem with the local certificate.

       59     Couldn't use specified SSL cipher.

       60     Peer  certificate cannot be authenticated with known CA certifi‐
	      cates.

       61     Unrecognized transfer encoding.

       62     Invalid LDAP URL.

       63     Maximum file size exceeded.

       64     Requested FTP SSL level failed.

       65     Sending the data requires a rewind that failed.

       66     Failed to initialise SSL Engine.

       67     The user name, password, or similar was not  accepted  and  curl
	      failed to log in.

       68     File not found on TFTP server.

       69     Permission problem on TFTP server.

       70     Out of disk space on TFTP server.

       71     Illegal TFTP operation.

       72     Unknown TFTP transfer ID.

       73     File already exists (TFTP).

       74     No such user (TFTP).

       75     Character conversion failed.

       76     Character conversion functions required.

       77     Problem with reading the SSL CA cert (path? access rights?).

       78     The resource referenced in the URL does not exist.

       79     An unspecified error occurred during the SSH session.

       80     Failed to shut down the SSL connection.

       82     Could  not  load	CRL  file,  missing  or wrong format (added in
	      7.19.0).

       83     Issuer check failed (added in 7.19.0).

       84     The FTP PRET command failed

       85     RTSP: mismatch of CSeq numbers

       86     RTSP: mismatch of Session Identifiers

       87     unable to parse FTP file list

       88     FTP chunk callback reported error

       XX     More error codes will appear here in future releases. The exist‐
	      ing ones are meant to never change.

AUTHORS / CONTRIBUTORS
       Daniel  Stenberg is the main author, but the whole list of contributors
       is found in the separate THANKS file.

WWW
       http://curl.haxx.se

FTP
       ftp://ftp.sunet.se/pub/www/utilities/curl/

SEE ALSO
       ftp(1), wget(1)

Curl 7.25.0		       16 February 2012			       curl(1)
[top]

List of man pages available for Haiku

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net