GPASM(1) Linux user's manual GPASM(1)NAMEgpasm - GNU PIC assembler
SYNOPSISgpasm [options] file
WARNING
The information in this man page is an extract from the full documenta‐
tion of gputils and is limited to the meaning of the options. For com‐
plete and current documentation, refer to "gputils.ps" located in the
gputils docs directory.
DESCRIPTIONgpasm is an assembler for Microchip (TM) PIC (TM) micro-controllers.
It's intended to be compatible with the manufacturer's MPASM assembler.
gpasm is part of gputils. Check the gputils(1) manpage for details on
other GNU PIC utilities.
OPTIONS
Below is a summary of the gpasm options. gpasm options always super‐
sede any settings in the source code.
-a FMT, --hex-format FMT
GPASM supports inhx8m, inhx8s, inhx16, and inhx32 hex file for‐
mats. This option controls which hex file format is used. The
default is inhx32.
-c, --object
Output a relocatable object (new COFF format).
-C, --old-coff
Output a relocatable object (old COFF format).
-d, --debug
Output debug messages.
-D SYM=VAL, --define SYM=VAL
Define SYM with value VAL. This is equivalent to placing
"#define SYM VAL" in the source.
-e [ON|OFF], --expand [ON|OFF]
Macro expansion in the listing file is controlled using the
EXPAND and NOEXPAND directives. This option can force either
directive to be ignored. When "ON" is selected the macros are
always expanded regardless of the presence of NOEXPAND. Like‐
wise, "OFF" will force macros not to be expanded.
-f, --full-address
Show full address in .lst file at the memory map region.
-g, --debug-info
Use debug directives for COFF.
-h, --help
Show the usage message and exit.
-i, --ignore-case
All user defined symbols and macros are case sensitive. This
option makes them case insensitive.
-I DIR, --include DIR
The top level assembly file is passed to gpasm as an argument.
This file can contain INCLUDE directives. These directives open
the specified file and then its contents are assembled. GPASM
searches for these files in the local directory. If the file is
not located, the default header path is checked. Finally, all
paths specified using this argument are searched.
-j, --sdcc-dev16-list
Help to the extension of the pic16devices.txt file in the sdcc
project. Using by itself, displays the all '16e' devices. Along
with the '-p' option, shows only the specified device.
-k, --error
Enables creation of the error file.
-l[12[ce]|14[cef]|16[ce]], --list-chips[=([12[ce]|14[cef]|16[ce]])]
List supported processors based on various aspects. (f => x)
-L, --force-list
Ignore NOLIST directives. This forces gpasm to print every line
assembled in the list file output.
-m, --dump
Upon completion of the final pass of assembly, display the con‐
tents of instruction memory.
--mpasm-compatible
This option sets the MPASM compatibility mode.
-M, --deps
Output a dependency file.
-n, --dos
By default, gpasm generates hex files using ISO format. How‐
ever, some device programmers required a DOS formatted file.
This option will cause gpasm to generate a DOS formatted hex
file.
-o FILE, --output FILE
Alternate name of output files. Option effect of:
-- If the "-c" option included in the command line:
FILE.o, FILE.lst, FILE.err
(The "FILE.o" should specified.)
-- If the "-c" option not included in the command line:
FILE.hex, FILE.cod, FILE.lst, FILE.err
(The "FILE.hex" should specified.)
-p PROC, --processor PROC
Select the processor.
-P FILE, --preprocess FILE
Write preprocessed asm file to FILE.
-q, --quiet
Suppress anything sent to standard output.
-r RADIX, --radix RADIX
The supported radices are BIN, DEC, OCT, and HEX. The default is
HEX.
-s[12[ce]|14[cef]|16[ce]],
--list-processor-properties[=([12[ce]|14[cef]|16[ce]])]
Lists properties of the processors. Using by itself, displays
the all devices or group of the devices. Along with the '-p'
option, shows only the specified device. (f => x)
-S [0|1|2], --strict [0|1|2]
Set the strict level of the recommended instruction-parameters
(W or F and A or B). The "strict messages" have higher priority
than the warnings. (See: -w [0|1|2]) [0]
0: Is the default. No strict messages.
1: Show warning messages if one of is missing.
2: Show error messages if one of is missing.
-t, --sdcc-dev14-list
Help to the extension of the pic14devices.txt file in the sdcc
project. Using by itself, displays the all '14' and '14e'
devices. Along with the '-p' option, shows only the specified
device.
--strict-options
If this is set, then an option may not be parameter of an
another option. For example: -I -c
-u, --absolute
Use absolute paths.
-v, --version
Show the version information and exit.
-w [0|1|2], --warning [0|1|2]
This option sets the message level.
0: Is the default. It will allow all messages, warnings and
errors to be reported.
1: Will suppress the messages.
2: Will suppress the messages and warnings.
-y, --extended
Enable 18xx extended mode.
SEE ALSOgputils(1)AUTHOR
Craig Franklin <craigfranklin@users.sourceforge.net>
COPYRIGHT
Copyright (C) 2002, 2003, 2004, 2005 James Bowman, Craig Franklin
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MER‐
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
675 Mass Ave, Cambridge, MA 02139, USA.
gputils-1.4.2 2014-05-01 GPASM(1)
