grdpaste man page on DragonFly

Printed from http://www.polarhome.com/service/man/?qf=grdpaste&af=0&tf=2&of=DragonFly

GRDPASTE(1)		     Generic Mapping Tools		   GRDPASTE(1)

NAME
       grdpaste - Paste together two .grd files along a common edge.

SYNOPSIS
       grdpaste file_a.grd file_b.grd -Goutfile.grd [ -V ] [ -f[i|o]colinfo ]

DESCRIPTION
       grdpaste	 will  combine	file_a.grd  and file_b.grd into outfile.grd by
       pasting them together along their common edge.	Files  file_a.grd  and
       file_b.grd  must	 have the same dx, dy and have one edge in common.  If
       in doubt, check with grdinfo and use grdcut and/or grdsample if	neces‐
       sary to prepare the edge joint.	For geographical grids, use -f to han‐
       dle periodic longitudes.

       file_a.grd
	      One of two files to be pasted together.

       file_b.grd
	      The other of two files to be pasted together.

       -Goutfile.grd
	      The name for the combined output.

OPTIONS
       -V     Selects verbose mode, which will send progress reports to stderr
	      [Default runs "silently"].

       -f     Special  formatting of input and/or output columns (time or geo‐
	      graphical data).	Specify i or o to  make	 this  apply  only  to
	      input  or	 output	 [Default  applies to both].  Give one or more
	      columns (or column ranges) separated by commas.  Append T (abso‐
	      lute  calendar time), t (relative time in chosen TIME_UNIT since
	      TIME_EPOCH), x (longitude), y (latitude), or f (floating	point)
	      to  each	column or column range item.  Shorthand -f[i|o]g means
	      -f[i|o]0x,1y (geographic coordinates).

GRID FILE FORMATS
       By default GMT writes out grid as single precision floats in a  COARDS-
       complaint  netCDF  file	format.	  However, GMT is able to produce grid
       files in many other commonly used grid file formats  and	 also  facili‐
       tates  so called "packing" of grids, writing out floating point data as
       2- or 4-byte integers. To specify the precision, scale and offset,  the
       user should add the suffix =id[/scale/offset[/nan]], where id is a two-
       letter identifier of the grid type and precision, and scale and	offset
       are  optional scale factor and offset to be applied to all grid values,
       and nan is the value used  to  indicate	missing	 data.	 When  reading
       grids,  the  format  is generally automatically recognized. If not, the
       same suffix can be added to input grid file names.  See	grdreformat(1)
       and  Section  4.17 of the GMT Technical Reference and Cookbook for more
       information.

       When reading a netCDF file that contains multiple grids, GMT will read,
       by default, the first 2-dimensional grid that can find in that file. To
       coax GMT into reading another multi-dimensional variable	 in  the  grid
       file,  append  ?varname	to the file name, where varname is the name of
       the variable. Note that you may need to escape the special meaning of ?
       in  your	 shell	program	 by  putting a backslash in front of it, or by
       placing the filename and suffix between quotes or double	 quotes.   The
       ?varname suffix can also be used for output grids to specify a variable
       name different from the default: "z".  See grdreformat(1)  and  Section
       4.18  of the GMT Technical Reference and Cookbook for more information,
       particularly on how to read splices of 3-, 4-, or 5-dimensional grids.

EXAMPLES
       Suppose file_a.grd is 150E - 180E and 0 - 30N, and file_b.grd is 150E -
       180E,  -30S  - 0, then you can make outfile.grd which will be 150 - 180
       and -30S - 30N by:

       grdpaste file_a.grd file_b.grd -G outfile.grd -V -fg

SEE ALSO
       GMT(1), grdcut(1), grdinfo(1), grdsample(1)

GMT 4.5.14			  1 Nov 2015			   GRDPASTE(1)
[top]

List of man pages available for DragonFly

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net