ibdiagnet man page on RedHat

Man page or keyword search:  
man Server   29550 pages
apropos Keyword Search (all sections)
Output format
RedHat logo
[printable version]

IBDIAGNET(1)		     IB DIAGNOSTIC PACKAGE		  IBDIAGNET(1)

NAME
       ibdiagnet - IB diagnostic net

SYNOPSYS
       ibdiagnet [-c <count>] [-v] [-r] [-vlr] [-u] [-o <out-dir>]
	 [-t <topo-file>] [-s <sys-name>] [-i <dev-index>] [-p <port-num>]
       [-wt]
	 [-pm] [-pc] [-P <<PM>=<Value>>]
	 [-lw <1x|4x|12x>] [-ls <2.5|5|10>]
	 [-skip <ibdiag_check/s>] [-load_db <db_file>]

DESCRIPTION
       ibdiagnet scans the fabric using directed route packets and extracts
       all the available information regarding its connectivity and devices.
       It then produces the following files in the output directory (which
       defined by the -o option (see below)).

FILES
       ibdiagnet.log -
	   A dump of all the application reports generate according to the
	   provided flags

       ibdiagnet.lst -
	   List of all the nodes, ports and links in the fabric

       ibdiagnet.fdbs -
	   A dump of the unicast forwarding tables of the fabric switches

       ibdiagnet.mcfdbs -
	   A dump of the multicast forwarding tables of the fabric switches

       ibdiagnet.masks -
	   In case of duplicate port/node Guids, these file include the map
	   between masked Guid and real Guids

       ibdiagnet.sm -
	   List of all the SM (state and priority) in the fabric

       ibdiagnet.pm -
	   A dump of the pm Counters values, of the fabric links

       ibdiagnet.pkey -
	   A dump of the the existing partitions and their member host ports

       ibdiagnet.mcgs -
	   A dump of the multicast groups, their properties and member host
	   ports

       ibdiagnet.psl -
	   A dump of the path record SL of each possible source node guid and
	   DLID pairs.	Created only if -vlr option is provided

       ibdiagnet.slvl -
	   A dump of the SL2VL Tables from all the switches.  Created only if
	   -vlr option is provided

       ibdiagnet.db -
	   A dump of the internal subnet database. This file can be loaded in
	   later runs using the -load_db option

       In addition to generating the files above, the discovery phase also
       checks for duplicate node/port GUIDs in the IB fabric. If such an error
       is detected, it is displayed on the standard output. After the
       discovery phase is completed, directed route packets are sent multiple
       times (according to the -c option) to detect possible problematic paths
       on which packets may be lost. Such paths are explored, and a report of
       the suspected bad links is displayed on the standard output.

       After scanning the fabric, if the -r option is provided, a full report
       of the fabric qualities is displayed.  This report includes:

       ·   SM report

       ·   Number of nodes and systems

       ·   Hop-count information

	    maximal hop-count, an example path, and a hop-count histogram
       ·   All CA-to-CA paths traced

       ·   Credit loop report

       ·   mgid-mlid-HCAs multicast group and report

       ·   Partitions report

       ·   IPoIB report

       Note: In case the IB fabric includes only one CA, then CA-to-CA paths
       are not reported.  Furthermore, if a topology file is provided,
       ibdiagnet uses the names defined in it for the output reports.

OPTIONS
       -c <count>      :
	    Min number of packets to be sent across each link (default = 10)
       -v	       :
	    Enable verbose mode
       -r	       :
	    Provides a report of the fabric qualities
       -u	       :
	    Credit loop check based on UpDown rules
       -t <topo-file>  :
	    Specifies the topology file name
       -s <sys-name>   :
	    Specifies the local system name. Meaningful only if a topology
	   file is specified
       -i <dev-index>  :
	    Specifies the index of the device of the port used to connect to
	   the IB fabric (in case of multiple devices on the local system)
       -p <port-num>   :
	    Specifies the local device's port num used to connect to the IB
	   fabric
       -o <out-dir>    :
	    Specifies the directory where the output files will be placed
	   (default = /var/cache/ibutils)
       -lw <1x|4x|12x> :
	    Specifies the expected link width
       -ls <2.5|5|10>  :
	    Specifies the expected link speed
       -pm	       :
	    Dump all the fabric links, pm Counters into ibdiagnet.pm
       -pc	       :
	    Reset all the fabric links pmCounters
       -P <PM=<Trash>> :
	    If any of the provided pm is greater then its provided value,
	   print it to screen
       -skip <skip-option(s)> :
	    Skip the executions of the selected checks. Skip options (one or
	   more can be specified) : dup_guids  zero_guids pm logical_state
	   part ipoib all
       -wt <file-name>> :
	    Write out the discovered topology into the given file. This flag
	   is useful if you later want to check for changes from the current
	   state of the fabric. A directory named ibdiag_ibnl is also created
	   by this option, and holds the IBNL files required to load this
	   topology. To use these files you will need to set the environment
	   variable named IBDM_IBNL_PATH to that directory. The directory is
	   located in /var/cache/ibutils or in the output directory provided
	   by the -o flag.
       -load_db <file-name>> :
	    Load subnet data from the given .db file, and skip subnet
	   discovery stage. Note: Some of the checks require actual subnet
	   discovery, and therefore would not run when load_db is specified.
	   These checks are : Duplicated/zero guids, link state, SMs status.
       -vlr :
	    VL based Routing - provide this option to create the paths SL file
	   (psl), SL2VL file (slvl) and use them in credit loops check (if -r
	   option is provided).
	       NOTE: Since number of paths is N^2 extracting the PSL file may
	       take some time.

       -h|--help       :
	    Prints the help page information
       -V|--version    :
	    Prints the version of the tool
       --vars	       :
	    Prints the tool's environment variables and their values

ERROR CODES
       1 - Failed to fully discover the fabric
       2 - Failed to parse command line options
       3 - Failed to intract with IB fabric
       4 - Failed to use local device or local port
       5 - Failed to use Topology File
       6 - Failed to load requierd Package

IBDIAG 1.0			  2013-08-28			  IBDIAGNET(1)
[top]

List of man pages available for RedHat

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net