IBSYSSTAT(8) Open IB Diagnostics IBSYSSTAT(8)NAME
IBSYSSTAT -
system status on an InfiniBand address
SYNOPSIS
ibsysstat [options] <dest lid | guid> [<op>]
DESCRIPTION
ibsysstat uses vendor mads to validate connectivity between IB nodes
and obtain other information about the IB node. ibsysstat is run as
client/server. Default is to run as client.
OPTIONS
Current supported operations:
:: ping - verify connectivity to server (default) host - obtain
host information from server cpu - obtain cpu information from
server
-o, --oui
use specified OUI number to multiplex vendor mads
-S, --Server
start in server mode (do not return)
Addressing Flags
-G, --Guid The address specified is a Port GUID
-L, --Lid The address specified is a LID
-s, --sm_port <smlid> use 'smlid' as the target lid for SA queries.
Port Selection flags
-C, --Ca <ca_name> use the specified ca_name.
-P, --Port <ca_port> use the specified ca_port.
Local port Selection
Multiple port/Multiple CA support: when no IB device or port is speci‐
fied (see the "local umad parameters" below), the libibumad library
selects the port to use by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the libibumad library
attempts to fulfill the user request, and will fail if it is not
possible.
For example:
ibaddr # use the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from "mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.
Debugging flags
-d raise the IB debugging level. May be used several times (-ddd
or -d -d -d).
-e show send and receive errors (timeouts and others)
-h, --help show the usage message
-v, --verbose
increase the application verbosity level. May be used several
times (-vv or -v -v -v)
-V, --version show the version info.
Configuration flags
-t, --timeout <timeout_ms> override the default timeout for the
solicited mads.
--config, -z <config_file> Specify alternate config file.
Default: /etc/infiniband-diags/ibdiag.conf
FILES
CONFIG FILE
/etc/infiniband-diags/ibdiag.conf
A global config file is provided to set some of the common options for
all tools. See supplied config file for details.
AUTHOR
Hal Rosenstock
< halr@voltaire.com >
IBSYSSTAT(8)
