IOPSP(4) OpenBSD Programmer's Manual IOPSP(4)NAMEiopsp - I2O SCSI port driver
SYNOPSIS
iopsp* at iop?
scsibus* at iopsp?
DESCRIPTION
The iopsp driver provides support for I2O SCSI bus adapter ports and
child peripherals.
IOPs present each child peripheral attached to a bus adapter port as an
individual device. In order to present the appearance of a bus, the
iopsp driver groups child peripherals by controlling port.
On IOPs containing a SCSI port and block or tape driver modules, some
SCSI devices may not be directly accessible. For each inaccessible
device, a message will be displayed during configuration. For example:
iopsp0: target 0,0 (tid 70): in use by tid 47
Such devices will usually be indirectly accessible as block devices,
either individually or as part of an array. For accessing these, there
is the ioprbs driver.
SEE ALSOintro(4), iop(4), ioprbs(4), scsibus(4)HISTORY
The iopsp driver first appeared in NetBSD 1.6, OpenBSD support was added
in OpenBSD 3.0.
AUTHORS
The iopsp driver was written by Andrew Doran <ad@netbsd.org> and ported
to OpenBSD 3.0 by Niklas Hallqvist <niklas@openbsd.org> and Michael
Shalayeff <mickey@openbsd.org>.
OpenBSD 4.9 June 26, 2008 OpenBSD 4.9