MHLIST(1)MHLIST(1)NAMEmhlist - list information about MIME messages
SYNOPSISmhlist [+folder] [msgs] [-file file] [-part number] ... [-type con‐
tent] ... [-headers | -noheaders] [-realsize | -norealsize]
[-rcache policy] [-wcache policy] [-check | -nocheck] [-changecur
| -nochangecur] [-verbose | -noverbose] [-disposition | -nodispo‐
sition] [-version] [-help]
DESCRIPTION
The mhlist command allows you to list information (essentially a table
of contents) about the various parts of a collection of MIME (multi-
media) messages.
mhlist manipulates MIME (multi-media messages) as specified in RFC 2045
to RFC 2049 (See mhbuild(1)).
The -headers switch indicates that a one-line banner should be dis‐
played above the listing.
The -realsize switch tells mhlist to evaluate the “native” (decoded)
format of each content prior to listing. This provides an accurate
count at the expense of a small delay.
If the -verbose switch is present, then the listing will show any
“extra” information that is present in the message, such as comments in
the “Content-Type” header.
If the -disposition switch is present, then the listing will show any
relevant information from the “Content-Disposition” header.
The option -file file directs mhlist to use the specified file as the
source message, rather than a message from a folder. If you specify
this file as “-”, then mhlist will accept the source message on the
standard input. Note that the file, or input from standard input
should be a validly formatted message, just like any other nmh message.
It should NOT be in mail drop format (to convert a file in mail drop
format to a folder of nmh messages, see inc(1)).
By default, mhlist will list information about the entire message (all
of its parts). By using the -part and -type switches, you may limit
the scope of this command to particular subparts (of a multipart con‐
tent) and/or particular content types.
A part specification consists of a series of numbers separated by dots.
For example, in a multipart content containing three parts, these would
be named as 1, 2, and 3, respectively. If part 2 was also a multipart
content containing two parts, these would be named as 2.1 and 2.2,
respectively. Note that the -part switch is effective for only mes‐
sages containing a multipart content. If a message has some other kind
of content, or if the part is itself another multipart content, the
-part switch will not prevent the content from being acted upon.
A content specification consists of a content type and a subtype. The
initial list of “standard” content types and subtypes can be found in
RFC 2046.
A list of commonly used contents is briefly reproduced here:
Type Subtypes
------------
text plain, enriched
multipart mixed, alternative, digest, parallel
message rfc822, partial, external-body
application octet-stream, postscript
image jpeg, gif, png
audio basic
video mpeg
A legal MIME message must contain a subtype specification.
To specify a content, regardless of its subtype, just use the name of
the content, e.g., “audio”. To specify a specific subtype, separate
the two with a slash, e.g., “audio/basic”. Note that regardless of the
values given to the -type switch, a multipart content (of any subtype
listed above) is always acted upon. Further note that if the -type
switch is used, and it is desirable to act on a message/external-body
content, then the -type switch must be used twice: once for mes‐
sage/external-body and once for the content externally referenced.
The parts of a multipart/alternative part are listed in the reverse
order of their placement in the message. The listing therefore is in
decreasing order of preference, as defined in RFC 1521.
Checking the Contents
The -check switch tells mhlist to check each content for an integrity
checksum. If a content has such a checksum (specified as a Content-MD5
header field), then mhlist will attempt to verify the integrity of the
content.
FILES
$HOME/.mh_profile The user profile
PROFILE COMPONENTS
Path: To determine the user's nmh directory
Current-Folder: To find the default current folder
SEE ALSOmhbuild(1), mhshow(1), mhstore(1)DEFAULTS
`+folder' defaults to the current folder
`msgs' defaults to cur
`-nocheck'
`-headers'
`-realsize'
`-rcache ask'
`-wcache ask'
`-changecur'
`-noverbose'
`-nodisposition'
CONTEXT
If a folder is given, it will become the current folder. The last mes‐
sage selected will become the current message, unless the -nochangecur
option is specified.
nmh-1.6 February 12, 2013 MHLIST(1)