NSR_CLIENT(5)NSR_CLIENT(5)NAMEnsr_client - NetWorker resource type ``NSR client''
SYNOPSIS
type: NSR client
DESCRIPTION
Each NSR client is described by a single resource of type NSR client
(see nsr_resource(5)). To edit the NSR client resources for a Net‐
Worker server type:
nsradmin -c "type:NSR client"
See the nsradmin(8) manual page for more information on using the Net‐
Worker administration program. The Client resource may also be edited
using NetWorker Management Console.
For each NetWorker client, this resource describes which files should
be saved, the schedule used to save these files, which directive should
be used to omit files from the save, how long the files' index entries
should be kept in the online file index and the media index, and who is
allowed to back up, browse, and recover this client's files. A client
may have more than one resource describing it.
ATTRIBUTES
The following attributes are defined for resource type NSR client. The
information in parentheses describes how the attribute values are
accessed. Read-only indicates that the value cannot be changed by an
administrator. Read/write means the value can be set as well as read.
Hidden means it is an attribute of interest only to programs or
experts. Hidden attributes can only be seen when the hidden option is
turned on in nsradmin(8). Dynamic attributes have values which change
rapidly. Encrypted attributes contain data that is not displayed in
its original form. The assumption is that the data is sensitive in
nature and needs to be protected from accidental disclosure. Several
additional attributes (for example, administrator) are common to all
resources, and are described in nsr_resource(5).
Certain client attributes (such as "Client OS type", "CPUs", "NetWorker
version" and "Enabler in use") do not get populated in the Client Set‐
up/Information window of the NetWorker interface, when the NetWorker
Server is running under Eval mode or an Enterprise license. However,
when the NetWorker server has a Workgroup/NetWork/Power Edition
enabler, these client attributes are refreshed appropriately in the
window after the client backup.
name (read-only, single string)
This attribute specifies the hostname of this NetWorker client.
Example: name: venus;
server (constant, single string)
This attribute specifies the hostname of this client's NetWorker
server. The server`s hostname will be used as the default
value.
Example: server: jupiter;
comment (read/write)
This attribute is provided for the administrator to keep any
explanatory remarks or supplementary information about this Net‐
Worker client.
Example: comment: machine located in room 243;
scheduled backup (read/write, choice)
This attribute is provided for the administrator to disable this
client for scheduled backups. This value is specific to this
client resource, it does not propagate to any other existing
resources for the same client. By default this attribute is
Enabled.
Example: scheduled backup: Disabled;
archive services (read/write, choice)
This attribute determines if this system can use archive ser‐
vices. This attribute can only be set if archive support has
been enabled on the server. The choices are enabled or dis‐
abled. Example: archive services: enabled;
schedule (read/write, choice)
This attribute specifies the name of the schedule controlling
the backup levels for the save sets listed in the `save set'
attribute. The default value is `Default'. Any currently
defined schedule names may be used, see nsr_schedule(5).
Example: schedule: Default;
browse policy (read/write, choice)
This attribute specifies the name of the policy controlling how
long entries will remain in this client's online file index.
The default value is `Month'. Any currently defined policy name
may be used as long as the period defined by the policy is not
longer than the retention policy's period, see nsr_policy(5).
Example: browse policy: Month;
retention policy (read/write, choice)
This attribute specifies the name of the policy controlling how
long entries will remain in the media index before they are
marked as recyclable. The default value is `Year'. Any cur‐
rently defined policy name may be used as long as the period
defined by the policy is not shorter than the browse policy's
period, see nsr_policy(5). The pool resource also contains a
retention policy attribute. If the pool that a clone save set
will be written to also has a defined retention policy, the
longer of the client and pool policy will be utilized. Cloned
save sets will utilize the pool retention policy if one is
defined.
Example: retention policy: Year;
directive (read/write, choice)
This attribute specifies the directive to use when backing up
the client. The default value is NULL. The valid choices for
the Directive resource are names of the currently defined `NSR
directive' resources, see nsr_directive(5).
Example: directive: UNIX with compression directives;
group (read/write, choice list)
This attribute specifies the group this client is a member of.
The group controls the start time for automatic backups. The
value may be one of the currently defined `NSR group' resources,
see nsr_group(5). The default value is `Default'.
Example: group: Default;
save set (read/write, list)
This attribute lists the path names to be saved for this client.
The names should be separated by comma space (, ). The default
value is `All'. On all NetWorker supported clients, `All'
refers to the mounted file systems. Also, NetWorker supports
`wildcard' at the filesystem level. For example, For a UNIX
NetWorker client, `/*' refers to all mounted filesystems under
`/'. And if `/space1' and `/space2' are valid filesystems, one
could use `/space*' to get both these filesystems backed up on
the particular client. Please note that `wildcard ' matching at
the subdirectory level, is not supported. So, `/space1/subdir*'
will not work.
When a client needs to have different file systems saved on dif‐
ferent schedules, a Client resource is needed for each set of
file systems on a particular schedule. For all the Client
resources with the same name in a group, a given path name may
only appear once. When a Client resource lists the save set
`All', it must be the only Client resource with its name belong‐
ing to its group.
Example: save set: /, /usr, /usr/src;
priority (hidden, read/write, choice)
This attribute controls the backup priority of this client.
Priority 1 is the highest, 1000 is the lowest. Automated save‐
grp's will attempt to back up clients with higher priorities
before clients with lower priorities. Note that this is only
one factor used to determine the next client. The savegrp com‐
mand has many parameters to consider, and may choose a lower
priority client while trying to balance the load.
Example: priority: 500;
remote access (read/write, string list)
This attribute controls who may back up, browse, and recover a
client's files. By default this attribute is an empty list,
signifying that only users on the client are allowed to back up,
browse, and recover its files. Additional users, hosts, and
netgroups may be granted permission to access this client's
files by adding their names to this attribute. Netgroup names
must be preceded by an ampersand ('&'). Each line specifies a
user or a group of users, using one of these formats:
user/host@domain , group/host@domain , user@host , user@domain ,
group@host , group@domain , &netgroup (only available on plat‐
forms that support netgroups) , user_attribute=value[, ...].
where user is a user name; host is a host name; group is a user
group name; domain is a domain name; user_attribute can be user,
group, host, nwinstname, nwinstancename, domain, or domaintype
(type of the domain, NIS or WINDOMAIN).
The user attributes: nwinstname and nwinstancename are used to
indicate a NetWorker instance name. The value that should be
entered for either of these attributes is the value in the
"name" field in the NSRLA resource for the machine where a
matched user is connecting from.
value can be any string delimited by white space. If the value
has space in it, then it can be quoted with double quotes. The
value may contain wild cards, "*". Entering just a user name
allows that user to administer NetWorker from any host (equiva‐
lent to user@* or */user or user=user). Netgroup names are
always preceded by an "&".
The format: user_attribute=value[, ...] is more secure because
the format is not overloaded. For example, if test@test.acme.com
is entered, then any users in the test group or users named test
and that are in the domain; test.acme.com or from the host;
test.acme.com will match this entry.
Example: The entries:
remote access: mars, *@jupiter, sam@pluto, */root;
remote access: host=mars, host=jupiter, "user=sam,host=pluto",
user=root;
are equivalent.
remote user (read/write, string)
This attribute has several uses. For those clients that are
accessed via the rsh(1) protocol (new clients use nsrexecd(8)
instead), this attribute specifies the user login name the Net‐
Worker server will use to authenticate itself with the client.
The default value is NULL, implying that `root' should be used.
When savegrp-p (see savegrp(8)) is run on the NetWorker server,
the server runs commands on the client to determine which files
to save. Note that when the nsrexecd(8) protocol is used to
access the client, the remote user attribute is not used for
authentication.
Certain clients, such as NetWare fileservers, use this attribute
along with the password attribute, below, to gain access to the
files being backed up. Other clients that back up application
data, such as Sybase databases, use this attribute along with
the password to gain access to the application data. There may
be a different value of this attribute for each resource that
describes the same client.
NDMP clients use this attribute along with the password
attribute to configure access to a NDMP server. The same user‐
name (remote user attribute) and password should be configured
in the Device resource as they are configured for the NDMP
server.
Example: remote user: operator;
password (read/write, encrypted)
The savegrp command uses this attribute when initiating the
savefs and save commands on the client's machine. The savefs
and save commands use the password to gain access to the files
being backed up. If a password is given, then the "remote user"
attribute for the Client resource must also be defined. There
may be a different value of this attribute for each resource
that describes the same client.
This attribute does not need to be set for existing UNIX clients
that are not backing up any application specific data.
This attribute is also used in conjunction with the remote user
attribute to configure access to a NDMP server.
backup command (read/write, string)
The remote command to run to back up data for this client and
save sets. This command can be used to perform pre and post
backup processing and defaults to the save command. The value
must not include a path and must start with the prefix "save" or
"nsr".
Example: backup command: savemsg;
executable path (read/write, string, hidden)
This attribute specifies the path to use when the NetWorker
server is executing commands on the client. When no path is
specified, the "remote user's" $PATH is used.
Example: executable path: /etc/nsr;
server network interface (read/write, string, hidden)
The name of the network interface on the server to be used for
saves and recovers.
Example: server network interface: mars-2;
aliases (read/write, string list, hidden)
This attribute is a list of aliases (nicknames) for the client
machine that queries can match. If this list is empty, match on
client name alone.
Example: aliases: mars;
owner notification (read/write, hidden)
A notification action to be executed to send the contents of
status messages to the owner/primary user of a machine (for
example, savegrp completion messages).
Example: owner notification: /usr/ucb/mail -s "mars' owner noti‐
fication" carl@mars;
statistics (constant, hidden, dynamic)
This attribute contains three values: the size of the client's
online file index in kilobytes, the number of kilobytes actually
used, and the number of entries in the index.
Example:
statistics: elapsed = 1761860, index size (KB) = 776,
amount used (KB) = 680, entries = 2216;
index save set (update-only, hidden, dynamic)
This attribute specifies the client file index save set to purge
when the index operation is set to purging oldest cycle.
Example: index save set: /;
index path (read/write, hidden)
This attribute is used to allow the NetWorker administrator to
balance NetWorker online file index disk utilization across mul‐
tiple disk partitions. If set, this attribute contains the full
path to the directory containing the client's online file index.
Note that the last component of the path must match the name
attribute of the Client resource (see above). If left blank,
the index path defaults to the path /nsr/index/name, where name
is the name attribute from the Client resource.
Example: index path: /disk2/index/venus;
index message (update-only, hidden, dynamic)
This attribute contains the ending status message for the previ‐
ous index operation. This attribute is typically blank, indi‐
cating that the previous operation completed successfully.
Example: index message:;
index operation start (update-only, hidden, dynamic)
This attribute contains the starting time of the current index
operation. This attribute is a null string ("") when the opera‐
tion is `Idle'. The format is weekday followed by hour and min‐
utes.
Example: index operation start: Wednesday 02:45;
index progress (update-only, hidden, dynamic)
This attribute contains the progress the index has made towards
finishing the current task. This attribute is blank when the
operation is `Idle'. The progress is expressed as a percentage.
Example: index progress: 45;
index operation (update-only, hidden, dynamic)
This attribute contains the current index operation. It is nor‐
mally `Idle'.
Example: index operation: Reclaiming space;
parallelism (read/write, hidden)
This attribute specifies the maximum number of saves that should
be run at the same time for the client.
Example: parallelism: 2;
archive users (read/write, string list)
This attribute specifies a list of users that are allowed to use
the archive services on the client. This attribute can only be
set if archive support has been enabled on the server. To
schedule an archive request for a client, root (or equivalent)
must be on that client's Archive users list, or else root@client
must be in the server's Administrator list. If no users are
listed and the client resides in same machine as the server,
only administrators and the local root user (that is,
root@server) are allowed to use the archive services on the
client. A value of '*' implies any user is allowed to archive
or retrieve data. The '/' and '@' characters are not allowed as
part of the user name.
Example: archive users: paul;
application information (read/write, hidden,
string list)
This attribute contains client application information. The use
of this attribute is client specific and should be utilized as
indicated by the documentation received with the product. NDMP
clients fill in various parameters and values in this attribute
separated by an equals sign ('=').
Example: application information: HIST=yes;
ndmp (read/write, choice)
This attribute indicates whether or not the Client resource is
configured for NDMP backups. If the client is used for NDMP
backups, the remote user and password attributes must be filled
in. The application information attribute may also be used.
Example: ndmp: yes;
storage nodes (read/write, string list)
This attribute is an ordered list of storage nodes for the
client to use when saving its data. Its saves are directed to
the first storage node that has an enabled device and a func‐
tional media daemon, nsrmmd(8). The default value of
'nsrserverhost' represents the server. In addition to storage
node names the keyword 'curphyhost' could also be entered into
the list. The entry 'curphyhost' denotes the current physical
host. It is only used for virtual clients on a cluster. It
should not be used on physical clients or on the client which is
tied with the virtual server. Using the curphyhost keyword would
enable the virtual clients backup to be directed to the storage
node on which the virtual client is currently residing on. See
nsr_storage_node(5) for additional detail on storage nodes.
clone storage nodes (read/write, string list)
This attribute specifies the hostnames of the storage nodes that
are to be selected for the `save' side of clone operations.
Cloned data originating from this client is directed to the
first node listed in the `clone storage node' list that has both
an enabled device and a functional media daemon, nsrmmd(8).
There is no default value. If this attribute has no value, the
server's 'clone storage nodes' will be consulted. If this
attribute also has no value, then the server's 'storage nodes'
attribute will be used to select a target node for the clone.
See nsr_storage_node(5) for additional detail on storage nodes.
recover storage nodes (read/write, string list)
This attribute is an ordered list of storage nodes for the
client to use when recovering its data. It is also used for the
recover side of a clone operation.
Exclusions:
If the volume being cloned or recovered from is already mounted,
then the recover storage node list is ignored and the volume is
used from its existing location.
If the volume is in a jukebox and the "read hostname" attribute
is set, then the recover storage node list is ignored and the
volume will be mounted on the designated host, unless the
FORCE_REC_AFFINITY environment variable is set to "yes".
licensed applications (read-only, string list)
This attribute contains names of the licensed applications used
by the client. By default, this field is blank.
EXAMPLES
Note: The hidden attributes are not shown in these examples.
A resource to define a client, called venus, backing up all of its
files to the NetWorker server mars:
type: NSR client;
name: venus;
server: mars;
archive services: Disabled;
schedule: Full Every Friday;
browse policy: Month;
retention policy: Quarter;
directive: UNIX with compression directives;
group: Default;
save set: All;
remote access: ;
remote user: ;
password: ;
backup command: ;
aliases: venus, venus.emc.com;
archive users: ;
storage nodes: nsrserverhost;
clone storage nodes: ;
The resources for a client backing up different file systems on differ‐
ent schedules:
type: NSR client;
name: saturn;
server: mars;
archive services: Disabled;
schedule: Default;
browse policy: Month;
retention policy: Quarter;
directive: ;
group: engineering;
save set: /, /usr, /usr/src;
remote access: venus, sam@*, jupiter/john;
remote user: operator;
password: ;
backup command: ;
aliases: saturn.emc.com;
archive users: ;
storage nodes: nsrserverhost;
clone storage nodes: ;
type: NSR client;
name: saturn;
server: mars;
archive services: Disabled;
schedule: Full on 1st Friday of Month;
browse policy: Month;
retention policy: Quarter;
directive: UNIX standard directives;
group: Default;
save set: /usr/src/archive;
remote access: sam@venus, &netadmins, root@*;
remote user: operator;
password: ;
backup command: ;
aliases: saturn.emc.com;
archive users: ;
storage nodes: nsrserverhost;
clone storage nodes: ;
SEE ALSOrsh(1), ruserok(3), nsr(5), nsr_schedule(5), nsr_directive(5),
nsr_group(5), nsr_policy(5), nsr_storage_node(5), save(8), savegrp(8),
savefs(8), nsradmin(8), nsrexecd(8)NetWorker 7.3.2 Aug 23, 06 NSR_CLIENT(5)