PCREUNICODE(3)PCREUNICODE(3)NAME
PCRE - Perl-compatible regular expressions
UTF-8, UTF-16, UTF-32, AND UNICODE PROPERTY SUPPORT
As well as UTF-8 support, PCRE also supports UTF-16 (from release 8.30)
and UTF-32 (from release 8.32), by means of two additional libraries.
They can be built as well as, or instead of, the 8-bit library.
UTF-8 SUPPORT
In order process UTF-8 strings, you must build PCRE's 8-bit library
with UTF support, and, in addition, you must call pcre_compile() with
the PCRE_UTF8 option flag, or the pattern must start with the sequence
(*UTF8) or (*UTF). When either of these is the case, both the pattern
and any subject strings that are matched against it are treated as
UTF-8 strings instead of strings of individual 1-byte characters.
UTF-16 AND UTF-32 SUPPORT
In order process UTF-16 or UTF-32 strings, you must build PCRE's 16-bit
or 32-bit library with UTF support, and, in addition, you must call
pcre16_compile() or pcre32_compile() with the PCRE_UTF16 or PCRE_UTF32
option flag, as appropriate. Alternatively, the pattern must start with
the sequence (*UTF16), (*UTF32), as appropriate, or (*UTF), which can
be used with either library. When UTF mode is set, both the pattern and
any subject strings that are matched against it are treated as UTF-16
or UTF-32 strings instead of strings of individual 16-bit or 32-bit
characters.
UTF SUPPORT OVERHEAD
If you compile PCRE with UTF support, but do not use it at run time,
the library will be a bit bigger, but the additional run time overhead
is limited to testing the PCRE_UTF[8|16|32] flag occasionally, so
should not be very big.
UNICODE PROPERTY SUPPORT
If PCRE is built with Unicode character property support (which implies
UTF support), the escape sequences \p{..}, \P{..}, and \X can be used.
The available properties that can be tested are limited to the general
category properties such as Lu for an upper case letter or Nd for a
decimal number, the Unicode script names such as Arabic or Han, and the
derived properties Any and L&. Full lists is given in the pcrepattern
and pcresyntax documentation. Only the short names for properties are
supported. For example, \p{L} matches a letter. Its Perl synonym,
\p{Letter}, is not supported. Furthermore, in Perl, many properties
may optionally be prefixed by "Is", for compatibility with Perl 5.6.
PCRE does not support this.
Validity of UTF-8 strings
When you set the PCRE_UTF8 flag, the byte strings passed as patterns
and subjects are (by default) checked for validity on entry to the rel‐
evant functions. The entire string is checked before any other process‐
ing takes place. From release 7.3 of PCRE, the check is according the
rules of RFC 3629, which are themselves derived from the Unicode speci‐
fication. Earlier releases of PCRE followed the rules of RFC 2279,
which allows the full range of 31-bit values (0 to 0x7FFFFFFF). The
current check allows only values in the range U+0 to U+10FFFF, exclud‐
ing the surrogate area and the non-characters.
Characters in the "Surrogate Area" of Unicode are reserved for use by
UTF-16, where they are used in pairs to encode codepoints with values
greater than 0xFFFF. The code points that are encoded by UTF-16 pairs
are available independently in the UTF-8 and UTF-32 encodings. (In
other words, the whole surrogate thing is a fudge for UTF-16 which
unfortunately messes up UTF-8 and UTF-32.)
Also excluded are the "Non-Character" code points, which are U+FDD0 to
U+FDEF and the last two code points in each plane, U+??FFFE and
U+??FFFF.
If an invalid UTF-8 string is passed to PCRE, an error return is given.
At compile time, the only additional information is the offset to the
first byte of the failing character. The run-time functions pcre_exec()
and pcre_dfa_exec() also pass back this information, as well as a more
detailed reason code if the caller has provided memory in which to do
this.
In some situations, you may already know that your strings are valid,
and therefore want to skip these checks in order to improve perfor‐
mance, for example in the case of a long subject string that is being
scanned repeatedly. If you set the PCRE_NO_UTF8_CHECK flag at compile
time or at run time, PCRE assumes that the pattern or subject it is
given (respectively) contains only valid UTF-8 codes. In this case, it
does not diagnose an invalid UTF-8 string.
Note that passing PCRE_NO_UTF8_CHECK to pcre_compile() just disables
the check for the pattern; it does not also apply to subject strings.
If you want to disable the check for a subject string you must pass
this option to pcre_exec() or pcre_dfa_exec().
If you pass an invalid UTF-8 string when PCRE_NO_UTF8_CHECK is set, the
result is undefined and your program may crash.
Validity of UTF-16 strings
When you set the PCRE_UTF16 flag, the strings of 16-bit data units that
are passed as patterns and subjects are (by default) checked for valid‐
ity on entry to the relevant functions. Values other than those in the
surrogate range U+D800 to U+DFFF are independent code points. Values in
the surrogate range must be used in pairs in the correct manner.
Excluded are the "Non-Character" code points, which are U+FDD0 to
U+FDEF and the last two code points in each plane, U+??FFFE and
U+??FFFF.
If an invalid UTF-16 string is passed to PCRE, an error return is
given. At compile time, the only additional information is the offset
to the first data unit of the failing character. The run-time functions
pcre16_exec() and pcre16_dfa_exec() also pass back this information, as
well as a more detailed reason code if the caller has provided memory
in which to do this.
In some situations, you may already know that your strings are valid,
and therefore want to skip these checks in order to improve perfor‐
mance. If you set the PCRE_NO_UTF16_CHECK flag at compile time or at
run time, PCRE assumes that the pattern or subject it is given (respec‐
tively) contains only valid UTF-16 sequences. In this case, it does not
diagnose an invalid UTF-16 string. However, if an invalid string is
passed, the result is undefined.
Validity of UTF-32 strings
When you set the PCRE_UTF32 flag, the strings of 32-bit data units that
are passed as patterns and subjects are (by default) checked for valid‐
ity on entry to the relevant functions. This check allows only values
in the range U+0 to U+10FFFF, excluding the surrogate area U+D800 to
U+DFFF, and the "Non-Character" code points, which are U+FDD0 to U+FDEF
and the last two characters in each plane, U+??FFFE and U+??FFFF.
If an invalid UTF-32 string is passed to PCRE, an error return is
given. At compile time, the only additional information is the offset
to the first data unit of the failing character. The run-time functions
pcre32_exec() and pcre32_dfa_exec() also pass back this information, as
well as a more detailed reason code if the caller has provided memory
in which to do this.
In some situations, you may already know that your strings are valid,
and therefore want to skip these checks in order to improve perfor‐
mance. If you set the PCRE_NO_UTF32_CHECK flag at compile time or at
run time, PCRE assumes that the pattern or subject it is given (respec‐
tively) contains only valid UTF-32 sequences. In this case, it does not
diagnose an invalid UTF-32 string. However, if an invalid string is
passed, the result is undefined.
General comments about UTF modes
1. Codepoints less than 256 can be specified in patterns by either
braced or unbraced hexadecimal escape sequences (for example, \x{b3} or
\xb3). Larger values have to use braced sequences.
2. Octal numbers up to \777 are recognized, and in UTF-8 mode they
match two-byte characters for values greater than \177.
3. Repeat quantifiers apply to complete UTF characters, not to individ‐
ual data units, for example: \x{100}{3}.
4. The dot metacharacter matches one UTF character instead of a single
data unit.
5. The escape sequence \C can be used to match a single byte in UTF-8
mode, or a single 16-bit data unit in UTF-16 mode, or a single 32-bit
data unit in UTF-32 mode, but its use can lead to some strange effects
because it breaks up multi-unit characters (see the description of \C
in the pcrepattern documentation). The use of \C is not supported in
the alternative matching function pcre[16|32]_dfa_exec(), nor is it
supported in UTF mode by the JIT optimization of pcre[16|32]_exec(). If
JIT optimization is requested for a UTF pattern that contains \C, it
will not succeed, and so the matching will be carried out by the normal
interpretive function.
6. The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly
test characters of any code value, but, by default, the characters that
PCRE recognizes as digits, spaces, or word characters remain the same
set as in non-UTF mode, all with values less than 256. This remains
true even when PCRE is built to include Unicode property support,
because to do otherwise would slow down PCRE in many common cases. Note
in particular that this applies to \b and \B, because they are defined
in terms of \w and \W. If you really want to test for a wider sense of,
say, "digit", you can use explicit Unicode property tests such as
\p{Nd}. Alternatively, if you set the PCRE_UCP option, the way that the
character escapes work is changed so that Unicode properties are used
to determine which characters match. There are more details in the sec‐
tion on generic character types in the pcrepattern documentation.
7. Similarly, characters that match the POSIX named character classes
are all low-valued characters, unless the PCRE_UCP option is set.
8. However, the horizontal and vertical white space matching escapes
(\h, \H, \v, and \V) do match all the appropriate Unicode characters,
whether or not PCRE_UCP is set.
9. Case-insensitive matching applies only to characters whose values
are less than 128, unless PCRE is built with Unicode property support.
A few Unicode characters such as Greek sigma have more than two code‐
points that are case-equivalent. Up to and including PCRE release 8.31,
only one-to-one case mappings were supported, but later releases (with
Unicode property support) do treat as case-equivalent all versions of
characters such as Greek sigma.
AUTHOR
Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.
REVISION
Last updated: 11 November 2012
Copyright (c) 1997-2012 University of Cambridge.
PCRE 8.32 11 November 2012 PCREUNICODE(3)
