pegasus_openlmi_uncSELinux_Policyxpegasuspegasus_openlmi_unconfined_selinux(8)NAMEpegasus_openlmi_unconfined_selinux - Security Enhanced Linux Policy for
the pegasus_openlmi_unconfined processes
DESCRIPTION
Security-Enhanced Linux secures the pegasus_openlmi_unconfined pro‐
cesses via flexible mandatory access control.
The pegasus_openlmi_unconfined processes execute with the pega‐
sus_openlmi_unconfined_t SELinux type. You can check if you have these
processes running by executing the ps command with the -Z qualifier.
For example:
ps -eZ | grep pegasus_openlmi_unconfined_t
ENTRYPOINTS
The pegasus_openlmi_unconfined_t SELinux type can be entered via the
filesystem_type, unlabeled_t, pegasus_openlmi_unconfined_exec_t,
proc_type, file_type, sysctl_type, mtrr_device_t file types.
The default entrypoint paths for the pegasus_openlmi_unconfined_t
domain are the following:
all files on the system, /dev/cpu/mtrr
PROCESS TYPES
SELinux defines process types (domains) for each process running on the
system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux
pegasus_openlmi_unconfined policy is very flexible allowing users to
setup their pegasus_openlmi_unconfined processes in as secure a method
as possible.
The following process types are defined for pegasus_openlmi_unconfined:
pegasus_openlmi_unconfined_t
Note: semanage permissive -a pegasus_openlmi_unconfined_t can be used
to make the process type pegasus_openlmi_unconfined_t permissive.
SELinux does not deny access to permissive process types, but the AVC
(SELinux denials) messages are still generated.
BOOLEANS
SELinux policy is customizable based on least access required. pega‐
sus_openlmi_unconfined policy is extremely flexible and has several
booleans that allow you to manipulate the policy and run pega‐
sus_openlmi_unconfined with the tightest access possible.
If you want to allow all daemons to write corefiles to /, you must turn
on the daemons_dump_core boolean. Disabled by default.
setsebool -P daemons_dump_core 1
If you want to enable cluster mode for daemons, you must turn on the
daemons_enable_cluster_mode boolean. Enabled by default.
setsebool -P daemons_enable_cluster_mode 1
If you want to allow all daemons to use tcp wrappers, you must turn on
the daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals,
you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny user domains applications to map a memory region as
both executable and writable, this is dangerous and the executable
should be reported in bugzilla, you must turn on the deny_execmem bool‐
ean. Enabled by default.
setsebool -P deny_execmem 1
If you want to deny any process from ptracing or debugging any other
processes, you must turn on the deny_ptrace boolean. Enabled by
default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors,
you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you
must turn on the domain_kernel_load_modules boolean. Disabled by
default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn
on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn
on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to control the ability to mmap a low area of the address
space, as configured by /proc/sys/kernel/mmap_min_addr, you must turn
on the mmap_low_allowed boolean. Disabled by default.
setsebool -P mmap_low_allowed 1
If you want to disable kernel module loading, you must turn on the
secure_mode_insmod boolean. Enabled by default.
setsebool -P secure_mode_insmod 1
If you want to boolean to determine whether the system permits loading
policy, setting enforcing mode, and changing boolean values. Set this
to true and you have to reboot to set it back, you must turn on the
secure_mode_policyload boolean. Enabled by default.
setsebool -P secure_mode_policyload 1
If you want to allow unconfined executables to make their heap memory
executable. Doing this is a really bad idea. Probably indicates a
badly coded executable, but could indicate an attack. This executable
should be reported in bugzilla, you must turn on the selin‐
uxuser_execheap boolean. Disabled by default.
setsebool -P selinuxuser_execheap 1
If you want to allow all unconfined executables to use libraries
requiring text relocation that are not labeled textrel_shlib_t, you
must turn on the selinuxuser_execmod boolean. Enabled by default.
setsebool -P selinuxuser_execmod 1
If you want to allow unconfined executables to make their stack exe‐
cutable. This should never, ever be necessary. Probably indicates a
badly coded executable, but could indicate an attack. This executable
should be reported in bugzilla, you must turn on the selinuxuser_exec‐
stack boolean. Enabled by default.
setsebool -P selinuxuser_execstack 1
If you want to support X userspace object manager, you must turn on the
xserver_object_manager boolean. Enabled by default.
setsebool -P xserver_object_manager 1
If you want to allow ZoneMinder to run su/sudo, you must turn on the
zoneminder_run_sudo boolean. Disabled by default.
setsebool -P zoneminder_run_sudo 1
MANAGED FILES
The SELinux process type pegasus_openlmi_unconfined_t can manage files
labeled with the following file types. The paths listed are the
default paths for these file types. Note the processes UID still need
to have DAC permissions.
file_type
all files on the system
COMMANDS
semanage fcontext can also be used to manipulate default file context
mappings.
semanage permissive can also be used to manipulate whether or not a
process type is permissive.
semanage module can also be used to enable/disable/install/remove pol‐
icy modules.
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux pol‐
icy settings.
AUTHOR
This manual page was auto-generated using sepolicy manpage .
SEE ALSOselinux(8), pegasus_openlmi_unconfined(8), semanage(8), restorecon(8),
chcon(1), sepolicy(8) , setsebool(8)pegasus_openlmi_unconfined13-11-pegasus_openlmi_unconfined_selinux(8)
