PG_CTL(1) PostgreSQL Server Applications PG_CTL(1)NAMEpg_ctl - start, stop, or restart a PostgreSQL server
SYNOPSISpg_ctl start [ -w ] [ -t seconds ] [ -s ] [ -D datadir ] [ -l file‐
name ] [ -o options ] [ -p path ] [ -c ]
pg_ctl stop [ -W ] [ -t seconds ] [ -s ] [ -D datadir ] [ -m
[ s[mart] ] [ f[ast] ] [ i[mmediate] ]
]
pg_ctl restart [ -w ] [ -t seconds ] [ -s ] [ -D datadir ] [ -c ]
[ -m
[ s[mart] ] [ f[ast] ] [ i[mmediate] ]
] [ -o options ]
pg_ctl reload [ -s ] [ -D datadir ]
pg_ctl status [ -D datadir ]
pg_ctl kill signal_name process_id
pg_ctl register [ -N servicename ] [ -U username ] [ -P password ] [
-D datadir ] [ -w ] [ -t seconds ] [ -s ] [ -o options ]
pg_ctl unregister [ -N servicename ]
DESCRIPTIONpg_ctl is a utility for starting, stopping, or restarting the Post‐
greSQL backend server (postgres(1)), or displaying the status of a run‐
ning server. Although the server can be started manually, pg_ctl encap‐
sulates tasks such as redirecting log output and properly detaching
from the terminal and process group. It also provides convenient
options for controlled shutdown.
In start mode, a new server is launched. The server is started in the
background, and standard input is attached to /dev/null. The standard
output and standard error are either appended to a log file (if the -l
option is used), or redirected to pg_ctl's standard output (not stan‐
dard error). If no log file is chosen, the standard output of pg_ctl
should be redirected to a file or piped to another process such as a
log rotating program like rotatelogs; otherwise postgres will write its
output to the controlling terminal (from the background) and will not
leave the shell's process group.
In stop mode, the server that is running in the specified data direc‐
tory is shut down. Three different shutdown methods can be selected
with the -m option: ``Smart'' mode waits for all the clients to discon‐
nect. This is the default. ``Fast'' mode does not wait for clients to
disconnect. All active transactions are rolled back and clients are
forcibly disconnected, then the server is shut down. ``Immediate'' mode
will abort all server processes without a clean shutdown. This will
lead to a recovery run on restart.
restart mode effectively executes a stop followed by a start. This
allows changing the postgres command-line options.
reload mode simply sends the postgres process a SIGHUP signal, causing
it to reread its configuration files (postgresql.conf, pg_hba.conf,
etc.). This allows changing of configuration-file options that do not
require a complete restart to take effect.
status mode checks whether a server is running in the specified data
directory. If it is, the PID and the command line options that were
used to invoke it are displayed.
kill mode allows you to send a signal to a specified process. This is
particularly valuable for Microsoft Windows which does not have a kill
command. Use --help to see a list of supported signal names.
register mode allows you to register a system service on Microsoft Win‐
dows.
unregister mode allows you to unregister a system service on Microsoft
Windows, previously registered with the register command.
OPTIONS-c Attempt to allow server crashes to produce core files, on plat‐
forms where this available, by lifting any soft resource limit
placed on them. This is useful in debugging or diagnosing prob‐
lems by allowing a stack trace to be obtained from a failed
server process.
-D datadir
Specifies the file system location of the database files. If
this is omitted, the environment variable PGDATA is used.
-l filename
Append the server log output to filename. If the file does not
exist, it is created. The umask is set to 077, so access to the
log file from other users is disallowed by default.
-m mode
Specifies the shutdown mode. mode can be smart, fast, or immedi‐
ate, or the first letter of one of these three.
-o options
Specifies options to be passed directly to the postgres command.
The options are usually surrounded by single or double quotes to
ensure that they are passed through as a group.
-p path
Specifies the location of the postgres executable. By default
the postgres executable is taken from the same directory as
pg_ctl, or failing that, the hard-wired installation directory.
It is not necessary to use this option unless you are doing
something unusual and get errors that the postgres executable
was not found.
-s Only print errors, no informational messages.
-t The number of seconds to wait when waiting for start or shutdown
to complete.
-w Wait for the start or shutdown to complete. The default wait
time is 60 seconds. This is the default option for shutdowns. A
successful shutdown is indicated by removal of the PID file. For
starting up, a successful psql -l indicates success. pg_ctl will
attempt to use the proper port for psql. If the environment
variable PGPORT exists, that is used. Otherwise, it will see if
a port has been set in the postgresql.conf file. If neither of
those is used, it will use the default port that PostgreSQL was
compiled with (5432 by default). When waiting, pg_ctl will
return an accurate exit code based on the success of the startup
or shutdown.
-W Do not wait for start or shutdown to complete. This is the
default for starts and restarts.
OPTIONS FOR WINDOWS
-N servicename
Name of the system service to register. The name will be used as
both the service name and the display name.
-P password
Password for the user to start the service.
-U username
User name for the user to start the service. For domain users,
use the format DOMAIN\username.
ENVIRONMENT
PGDATA Default data directory location.
PGPORT Default port for psql(1) (used by the -w option).
For additional server variables, see postgres(1). This utility, like
most other PostgreSQL utilities, also uses the environment variables
supported by libpq (see in the documentation).
FILES
postmaster.pid
The existence of this file in the data directory is used to help
pg_ctl determine if the server is currently running or not.
postmaster.opts.default
If this file exists in the data directory, pg_ctl (in start
mode) will pass the contents of the file as options to the post‐
gres command, unless overridden by the -o option.
postmaster.opts
If this file exists in the data directory, pg_ctl (in restart
mode) will pass the contents of the file as options to postgres,
unless overridden by the -o option. The contents of this file
are also displayed in status mode.
postgresql.conf
This file, located in the data directory, is parsed to find the
proper port to use with psql when the -w is given in start mode.
NOTES
Waiting for complete start is not a well-defined operation and might
fail if access control is set up so that a local client cannot connect
without manual interaction (e.g., password authentication). For addi‐
tional connection variables, see in the documentation, and for pass‐
words, also see in the documentation.
EXAMPLES
STARTING THE SERVER
To start up a server:
$ pg_ctl start
An example of starting the server, blocking until the server has come
up is:
$ pg_ctl-w start
For a server using port 5433, and running without fsync, use:
$ pg_ctl-o "-F -p 5433" start
STOPPING THE SERVER
$ pg_ctl stop
stops the server. Using the -m switch allows one to control how the
backend shuts down.
RESTARTING THE SERVER
Restarting the server is almost equivalent to stopping the server and
starting it again except that pg_ctl saves and reuses the command line
options that were passed to the previously running instance. To restart
the server in the simplest form, use:
$ pg_ctl restart
To restart server, waiting for it to shut down and to come up:
$ pg_ctl-w restart
To restart using port 5433 and disabling fsync after restarting:
$ pg_ctl-o "-F -p 5433" restart
SHOWING THE SERVER STATUS
Here is a sample status output from pg_ctl:
$ pg_ctl status
pg_ctl: server is running (pid: 13718)
Command line was:
/usr/local/pgsql/bin/postgres '-D' '/usr/local/pgsql/data' '-p' '5433' '-B' '128'
This is the command line that would be invoked in restart mode.
SEE ALSOpostgres(1)Application 2013-02-04 PG_CTL(1)
