RADTEST(1) FreeRADIUS Daemon RADTEST(1)NAMEradtest - send packets to a RADIUS server, show reply
SYNOPSISradtest [-d raddb_directory] [-t pap/chap/mschap] [-x ] [-4 ] [-6 ]
user password radius-server nas-port-number secret [ppphint] [nasname]
DESCRIPTIONradtest is a frontend to radclient(1). It generates a list of
attribute/value pairs based on the command line arguments, and feeds
these into radclient. It's a fast and convenient way to test a radius
server.
OPTIONS-d raddb_directory
The directory that contains the RADIUS dictionary files.
Defaults to /etc/raddb.
-t pap/chap/mschap/eap-md5
Choose the authentiction method to use. e.g. "-t pap", "-t
chap", "-t mschap", or "-t eap-md5",. Defaults to "pap". Using
EAP-MD5 requires that the "radeapclient" program is installed.
-x Enables debugging output for the RADIUS client.
-4 Use NAS-IP-Address for the NAS address (default)
-6 Use NAS-IPv6-Address for the NAS address (default)
user Username to send.
password
Password of the user.
radius-server
Hostname or IP address of the radius server. Optionally, you may
specify a port by appending :port
nas-port-number
The value of the NAS-Port attribute. Is an integer between 0 and
2^31, and it really doesn't matter what you put here. 10 will do
fine.
secret The shared secret for this client.
ppphint
If you put an integer > 0 here, radtest (or actually radclient)
will add the attribute Framed-Protocol = PPP to the request
packet.
nasname
If present, this will be resolved to an IP address and added to
the request packet as the NAS-IP-Address attribute. If you don't
specify it, the local hostname of the system will be used.
SEE ALSOradiusd(8), radclient(1).
AUTHOR
Miquel van Smoorenburg, miquels@cistron.nl.
5 April 2010 RADTEST(1)
