RESOLV.CONF(5) Linux Programmer's Manual RESOLV.CONF(5)NAME
resolv.conf - resolver configuration file
SYNOPSIS
/etc/resolv.conf
DESCRIPTION
The resolver is a set of routines in the C library that provide access
to the Internet Domain Name System (DNS). The resolver configuration
file contains information that is read by the resolver routines the
first time they are invoked by a process. The file is designed to be
human readable and contains a list of keywords with values that provide
various types of resolver information.
On a normally configured system this file should not be necessary. The
only name server to be queried will be on the local machine; the domain
name is determined from the hostname and the domain search path is con‐
structed from the domain name.
The different configuration options are:
nameserver Name server IP address
Internet address (in dot notation) of a name server that the
resolver should query. Up to MAXNS (currently 3, see
<resolv.h>) name servers may be listed, one per keyword. If
there are multiple servers, the resolver library queries them in
the order listed. If no nameserver entries are present, the
default is to use the name server on the local machine. (The
algorithm used is to try a name server, and if the query times
out, try the next, until out of name servers, then repeat trying
all the name servers until a maximum number of retries are
made.)
domain Local domain name.
Most queries for names within this domain can use short names
relative to the local domain. If no domain entry is present,
the domain is determined from the local hostname returned by
gethostname(2); the domain part is taken to be everything after
the first '.'. Finally, if the hostname does not contain a
domain part, the root domain is assumed.
search Search list for host-name lookup.
The search list is normally determined from the local domain
name; by default, it contains only the local domain name. This
may be changed by listing the desired domain search path follow‐
ing the search keyword with spaces or tabs separating the names.
Resolver queries having fewer than ndots dots (default is 1) in
them will be attempted using each component of the search path
in turn until a match is found. For environments with multiple
subdomains please read options ndots:n below to avoid man-in-
the-middle attacks and unnecessary traffic for the root-dns-
servers. Note that this process may be slow and will generate a
lot of network traffic if the servers for the listed domains are
not local, and that queries will time out if no server is avail‐
able for one of the domains.
The search list is currently limited to six domains with a total
of 256 characters.
sortlist
This option allows addresses returned by gethostbyname(3) to be
sorted. A sortlist is specified by IP-address-netmask pairs.
The netmask is optional and defaults to the natural netmask of
the net. The IP address and optional network pairs are sepa‐
rated by slashes. Up to 10 pairs may be specified. Here is an
example:
sortlist 130.155.160.0/255.255.240.0 130.155.0.0
options
Options allows certain internal resolver variables to be modi‐
fied. The syntax is
options option ...
where option is one of the following:
debug sets RES_DEBUG in _res.options.
ndots:n
sets a threshold for the number of dots which must appear
in a name given to res_query(3) (see resolver(3)) before
an initial absolute query will be made. The default for
n is 1, meaning that if there are any dots in a name, the
name will be tried first as an absolute name before any
search list elements are appended to it. The value for
this option is silently capped to 15.
timeout:n
sets the amount of time the resolver will wait for a
response from a remote name server before retrying the
query via a different name server. Measured in seconds,
the default is RES_TIMEOUT (currently 5, see <resolv.h>).
The value for this option is silently capped to 30.
attempts:n
sets the number of times the resolver will send a query
to its name servers before giving up and returning an
error to the calling application. The default is
RES_DFLRETRY (currently 2, see <resolv.h>). The value
for this option is silently capped to 5.
rotate sets RES_ROTATE in _res.options, which causes round robin
selection of nameservers from among those listed. This
has the effect of spreading the query load among all
listed servers, rather than having all clients try the
first listed server first every time.
no-check-names
sets RES_NOCHECKNAME in _res.options, which disables the
modern BIND checking of incoming hostnames and mail names
for invalid characters such as underscore (_), non-ASCII,
or control characters.
inet6 sets RES_USE_INET6 in _res.options. This has the effect
of trying a AAAA query before an A query inside the geth‐
ostbyname(3) function, and of mapping IPv4 responses in
IPv6 "tunneled form" if no AAAA records are found but an
A record set exists.
ip6-bytestring (since glibc 2.3.4)
sets RES_USE_BSTRING in _res.options. This causes
reverse IPv6 lookups to be made using the bit-label for‐
mat described in RFC 2673; if this option is not set,
then nibble format is used.
ip6-dotint/no-ip6-dotint (since glibc 2.3.4)
Clear/set RES_NOIP6DOTINT in _res.options. When this
option is clear (ip6-dotint), reverse IPv6 lookups are
made in the (deprecated) ip6.int zone; when this option
is set (no-ip6-dotint), reverse IPv6 lookups are made in
the ip6.arpa zone by default. This option is set by
default.
edns0 (since glibc 2.6)
sets RES_USE_EDNSO in _res.options. This enables support
for the DNS extensions described in RFC 2671.
single-request (since glibc 2.10)
sets RES_SNGLKUP in _res.options. By default, glibc per‐
forms IPv4 and IPv6 lookups in parallel since version
2.9. Some appliance DNS servers cannot handle these
queries properly and make the requests time out. This
option disables the behavior and makes glibc perform the
IPv6 and IPv4 requests sequentially (at the cost of some
slowdown of the resolving process).
single-request-reopen (since glibc 2.9)
The resolver uses the same socket for the A and AAAA
requests. Some hardware mistakenly only sends back one
reply. When that happens the client sytem will sit and
wait for the second reply. Turning this option on
changes this behavior so that if two requests from the
same port are not handled correctly it will close the
socket and open a new one before sending the second
request.
The domain and search keywords are mutually exclusive. If more than
one instance of these keywords is present, the last instance wins.
The search keyword of a system's resolv.conf file can be overridden on
a per-process basis by setting the environment variable LOCALDOMAIN to
a space-separated list of search domains.
The options keyword of a system's resolv.conf file can be amended on a
per-process basis by setting the environment variable RES_OPTIONS to a
space-separated list of resolver options as explained above under
options.
The keyword and value must appear on a single line, and the keyword
(e.g., nameserver) must start the line. The value follows the keyword,
separated by white space.
FILES
/etc/resolv.conf, <resolv.h>
SEE ALSOgethostbyname(3), resolver(3), hostname(7), named(8)
Name Server Operations Guide for BIND
COLOPHON
This page is part of release 3.35 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://man7.org/linux/man-pages/.
4th Berkeley Distribution 2009-03-01 RESOLV.CONF(5)
