rpc.rigd man page on DragonFly
[printable version]
RIGD(8) RPC Rig Daemon RIGD(8)
NAME
rigd - Hamlib rig service daemon
SYNOPSIS
rpc.rigd [OPTION]...
DESCRIPTION
The rigd program is a Hamlib rig daemon that handles RPC client
requests. This allows multiple user programs to share one radio. At
this time multiple radio support is not available (help needed!).
Keep in mind that Hamlib is BETA level software. While a lot of back‐
end libraries lack complete rig support, the basic functions are usu‐
ally well supported. The API may change without publicized notice,
while an advancement of the minor version (e.g. 1.1.x to 1.2.x) indi‐
cates such a change.
Please report bugs and provide feedback at the e-mail address given in
the REPORTING BUGS section. Patches and code enhancements are also
welcome.
OPTIONS
This program follows the usual GNU command line syntax, with long
options starting with two dashes (`-').
Here is a summary of the supported options:
-m, --model=id
Select radio model number. See rig model list (use 'rigctl -l').
NB: rigctl (or third party software) will use rig model 1901
when using rigd.
-r, --rig-file=device
Use device as the file name of the port the radio is connected.
Often a serial port, but could be a USB to serial adapter. Typ‐
ically /dev/ttyS0, /dev/ttyS1, /dev/ttyUSB0, etc.
-p, --ptt-file=device
Use device as the file name of the Push-To-Talk device using a
device file as described above.
-d, --dcd-file=device
Use device as the file name of the Data Carrier Detect device
using a device file as described above.
-p, --ptt-type=type
Use type of Push-To-Talk device. Supported types are RIG, DTR,
RTS, PARALLEL, NONE.
-d, --dcd-type=type
Use type of Data Carrier Detect device. Supported types are
RIG, DSR, CTS, CD, PARALLEL, NONE.
-s, --serial-speed=baud
Set serial speed to baud rate. Uses maximum serial speed from
rig backend capabilities as the default.
-c, --civaddr=id
Use id as the CI-V address to communicate with the rig. Only
useful for Icom rigs.
NB: the id is in decimal notation, unless prefixed by 0x, in
which case it is hexadecimal.
-C, --set-conf=parm=val[,parm=val]*
Set config parameter. e.g. stop_bits=2
Use -L option of rigctl for a list.
-t, --prog=number
Use number as the RPC program number. The default is 536871065.
-v, --verbose
Set verbose mode, cumulative (see DIAGNOSTICS below).
-h, --help
Show a summary of these options and exit.
-V, --version
Show the version of rigd and exit.
Please note that the backend for the radio to be controlled, or the
radio itself may not support some commands. In that case, the operation
will fail with a Hamlib error code.
EXAMPLES
Start rigd as root for a Yaesu FT-920 using a USB to serial adapter and
backgrounding:
# rpc.rigd -m 114 -r /dev/ttyUSB1 &
Start rigd as root for a Yaesu FT-920 using COM1 while generating TRACE
output:
# rpc.rigd -m 114 -r /dev/ttyS0 -vvvvv
Start rigd as root for a Yaesu FT-920 using a USB to serial adapter
while setting baud rate and stop bits and backgrounding:
# rpc.rigd -m 114 -r /dev/ttyUSB1 -s 4800 -C stop_bits=2 &
DIAGNOSTICS
The -v, --version option allows different levels of diagnostics to be
output to stderr and correspond to -v for BUG, -vv for ERR, -vvv for
WARN, -vvvv for VERBOSE, or -vvvvv for TRACE.
A given verbose level is useful for providing needed debugging informa‐
tion to the email address below. For example, TRACE output shows all
of the values sent to and received from the radio which is very useful
for radio backend library development and may be requested by the
developers.
SECURITY
No authentication whatsoever; could be done through domain restriction,
though. Please ask if stronger security is needed.
BUGS
Does not support more than one rig that share the same serial port
(e.g. Icom radios on a CI-V bus).
Does not support more than one communication device for multiple rig
control. (e.g. for Single Operator 2 Radio) Help needed!
REPORTING BUGS
Report bugs to <hamlib-developer@lists.sourceforge.net>.
We are already aware of the bugs in the previous section :-)
AUTHORS
Written by Stephane Fillod and the Hamlib Group
<http://www.hamlib.org>.
COPYRIGHT
Copyright © 2000-2007 Stephane Fillod and the Hamlib Group.
This is free software; see the source for copying conditions. There is
NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
SEE ALSO
rigctl(1), hamlib(3)
Hamlib February 24, 2007 RIGD(8)
[top]
List of man pages available for DragonFly
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
|
Vote for polarhome
|
