rwgroup(1) SiLK Tool Suite rwgroup(1)NAMErwgroup - Tag similar SiLK records with a common next hop IP value
SYNOPSISrwgroup
{--id-fields=KEY | --delta-field=FIELD --delta-value=DELTA}
[--objective] [--summarize] [--rec-threshold=THRESHOLD]
[--group-offset=IP]
[--note-add=TEXT] [--note-file-add=FILE] [--output-path=PATH]
[--copy-input=PATH] [--compression-method=COMP_METHOD]
[--site-config-file=FILENAME]
[--plugin=PLUGIN [--plugin=PLUGIN ...]]
[--python-file=PATH [--python-file=PATH ...]]
[--pmap-file=MAPNAME:PATH [--pmap-file=MAPNAME:PATH ...]]
[FILE]
rwgroup [--pmap-file=MAPNAME:PATH [--pmap-file=MAPNAME:PATH ...]]
[--plugin=PLUGIN ...] [--python-file=PATH ...] --help
rwgroup [--pmap-file=MAPNAME:PATH [--pmap-file=MAPNAME:PATH ...]]
[--plugin=PLUGIN ...] [--python-file=PATH ...] --help-fields
rwgroup--version
DESCRIPTIONrwgroup reads sorted SiLK Flow records (c.f. rwsort(1)) from the
standard input or from a single file name listed on the command line,
marks records that form a group with an identifier in the Next Hop IP
field, and prints the binary SiLK Flow records to the standard output.
In some ways rwgroup is similar to rwuniq(1), but rwgroup writes SiLK
flow records instead of textual output.
Two SiLK records are defined as being in the same group when the fields
specified in the --id-fields switch match exactly and when the field
listed in the --delta-field matches within the value given by the
--delta-value switch. Either --id-fields or --delta-fields is
required; both may be specified. A --delta-value must be given when
--delta-fields is present.
The first group of records gets the identifer 0, and rwgroup writes
that value into each record's Next Hop IP field. The ID for each
subsequent group is incremented by 1. The --group-offset switch may be
used to set the identifier of the initial group.
The --rec-threshold switch may be used to only write groups that
contain a certain number of records. The --summarize switch attempts
to merge records in the same group to a single output record.
rwgroup requires that the records are sorted on the fields listed in
the --id-fields and --delta-fields switches. For example, a call using
rwgroup --id-field=2 --delta-field=9 --delta-value=3
should read the output of
rwsort --field=2,9
otherwise the results are unpredictable.
OPTIONS
Option names may be abbreviated if the abbreviation is unique or is an
exact match for an option. A parameter to an option may be specified
as --arg=param or --arg param, though the first form is required for
options that take optional parameters.
At least one value for --id-field or --delta-field must be provided;
rwgroup terminates with an error if no fields are specified.
--id-fields=KEY
KEY contains the list of flow attributes (a.k.a. fields or columns)
that must match exactly for flows to be considered part of the same
group. Each field may be specified once only. KEY is a comma
separated list of field-names, field-integers, and ranges of field-
integers; a range is specified by separating the start and end of
the range with a hyphen (-). Field-names are case insensitive.
Example:
--id-fields=stime,10,1-5
There is no default value for the --id-fields switch.
The complete list of built-in fields that the SiLK tool suite
supports follows, though note that not all fields are present in
all SiLK file formats; when a field is not present, its value is 0.
sIP,1
source IP address
dIP,2
destination IP address
sPort,3
source port for TCP and UDP, or equivalent
dPort,4
destination port for TCP and UDP, or equivalent
protocol,5
IP protocol
packets,pkts,6
packet count
bytes,7
byte count
flags,8
bit-wise OR of TCP flags over all packets
sTime,9
starting time of flow (seconds resolution)
duration,10
duration of flow (seconds resolution)
eTime,11
end time of flow (seconds resolution)
sensor,12
name or ID of sensor at the collection point
class,20
class of sensor at the collection point
type,21
type of sensor at the collection point
iType
the ICMP type value for ICMP or ICMPv6 flows and zero for non-
ICMP flows. Internally, SiLK stores the ICMP type and code in
the "dPort" field, so there is no need have both "dPort" and
"iType" or "iCode" in the sort key. This field was introduced
in SiLK 3.8.1.
iCode
the ICMP code value for ICMP or ICMPv6 flows and zero for non-
ICMP flows. See note at "iType".
icmpTypeCode,25
equivalent to "iType","iCode" in --id-fields. This field may
not be mixed with "iType" or "iCode", and this field is
deprecated as of SiLK 3.8.1. As of SiLK 3.8.1, "icmpTypeCode"
may no longer be used as the argument to --delta-field; the
"dPort" field will provide an equivalent result as long as the
input is limited to ICMP flow records.
Many SiLK file formats do not store the following fields and their
values will always be 0; they are listed here for completeness:
in,13
router SNMP input interface or vlanId if packing tools were
configured to capture it (see sensor.conf(5))
out,14
router SNMP output interface or postVlanId
SiLK can store flows generated by enhanced collection software that
provides more information than NetFlow v5. These flows may support
some or all of these additional fields; for flows without this
additional information, the field's value is always 0.
initialFlags,26
TCP flags on first packet in the flow
sessionFlags,27
bit-wise OR of TCP flags over all packets except the first in
the flow
attributes,28
flow attributes set by the flow generator:
"S" all the packets in this flow record are exactly the same
size
"F" flow generator saw additional packets in this flow
following a packet with a FIN flag (excluding ACK packets)
"T" flow generator prematurely created a record for a long-
running connection due to a timeout. (When the flow
generator yaf(1) is run with the --silk switch, it will
prematurely create a flow and mark it with "T" if the byte
count of the flow cannot be stored in a 32-bit value.)
"C" flow generator created this flow as a continuation of long-
running connection, where the previous flow for this
connection met a timeout (or a byte threshold in the case
of yaf).
Consider a long-running ssh session that exceeds the flow
generator's active timeout. (This is the active timeout since
the flow generator creates a flow for a connection that still
has activity). The flow generator will create multiple flow
records for this ssh session, each spanning some portion of the
total session. The first flow record will be marked with a "T"
indicating that it hit the timeout. The second through next-
to-last records will be marked with "TC" indicating that this
flow both timed out and is a continuation of a flow that timed
out. The final flow will be marked with a "C", indicating that
it was created as a continuation of an active flow.
application,29
guess as to the content of the flow. Some software that
generates flow records from packet data, such as yaf, will
inspect the contents of the packets that make up a flow and use
traffic signatures to label the content of the flow. SiLK
calls this label the application; yaf refers to it as the
appLabel. The application is the port number that is
traditionally used for that type of traffic (see the
/etc/services file on most UNIX systems). For example, traffic
that the flow generator recognizes as FTP will have a value of
21, even if that traffic is being routed through the standard
HTTP/web port (80).
The following fields provide a way to label the IPs or ports on a
record. These fields require external files to provide the mapping
from the IP or port to the label:
sType,16
categorize the source IP address as "non-routable", "internal",
or "external" and group based on the category. Uses the
mapping file specified by the SILK_ADDRESS_TYPES environment
variable, or the address_types.pmap mapping file, as described
in addrtype(3).
dType,17
as sType for the destination IP address
scc,18
the country code of the source IP address. Uses the mapping
file specified by the SILK_COUNTRY_CODES environment variable,
or the country_codes.pmap mapping file, as described in
ccfilter(3).
dcc,19
as scc for the destination IP
src-MAPNAME
value determined by passing the source IP or the
protocol/source-port to the user-defined mapping defined in the
prefix map associated with MAPNAME. See the description of the
--pmap-file switch below and the pmapfilter(3) manual page.
dst-MAPNAME
as src-MAPNAME for the destination IP or
protocol/destination-port.
sval
dval
These are deprecated field names created by pmapfilter that
correspond to src-MAPNAME and dst-MAPNAME, respectively. These
fields are available when a prefix map is used that is not
associated with a MAPNAME.
Finally, the list of built-in fields may be augmented by the run-
time loading of PySiLK code or plug-ins written in C (also called
shared object files or dynamic libraries), as described by the
--python-file and --plugin switches.
--delta-field=FIELD
Specify a single field that can differ by a specified delta-value
among the SiLK records that make up a group. The FIELD identifiers
include most of those specified for --id-fields. The exceptions
are that plug-in fields are not supported, nor are fields that do
not have numeric values (e.g., class, type, flags). The most
common value for this switch is "stime", which allows records that
are identical in the id-fields but temporally far apart to be in
different groups. The switch takes a single argument; multiple
delta fields cannot be specified. When this switch is specified,
the --delta-value switch is required.
--delta-value=DELTA_VALUE
Specify the acceptable difference between the values of the
--delta-field. The --delta-value switch is required when the
--delta-field switch is provided. For fields other than those
holding IPs, when two consecutive records have values less than or
equal to DELTA_VALUE, the records are considered members of the
same group. When the delta-field refers to an IP field,
DELTA_VALUE is the number of least significant bits of the IPs to
remove before comparing them. For example, when --delta-field=sIP
--delta-value=8 is specified, two records are the same group if
their source IPv4 addresses belong to the same /24 or if their
source IPv6 addresses belong to the same /120. The --objective
switch affects the meaning of this switch.
--objective
Change the behavior of the --delta-value switch so that a record is
considered part of a group if the value of its --delta-field is
within the DELTA_VALUE of the first record in the group. (When
this switch is not specified, consecutive records are compared.)
--summarize
Cause rwgroup to print (typically) a single record for each group.
By default, all records in each group having at least
--rec-threshold members is printed. When --summarize is active,
the record that is written for the group is the first record in the
group with the following modifications:
· The packets and bytes values are the sum of the packets and
bytes values, respectively, for all records in the group.
· The start-time value is the earliest start time for the records
in the group.
· The end-time value is the latest end time for the records in
the group.
· The flags and session-flags values are the bitwise-OR of all
flags and session-flags values, respectively, for the records
in the group.
Note that multiple records for a group may be printed if the bytes,
packets, or elapsed time values are too large to be stored in a
SiLK flow record.
--plugin=PLUGIN
Augment the list of fields by using run-time loading of the plug-in
(shared object) whose path is PLUGIN. The switch may be repeated
to load multiple plug-ins. The creation of plug-ins is described
in the silk-plugin(3) manual page. When PLUGIN does not contain a
slash ("/"), rwgroup will attempt to find a file named PLUGIN in
the directories listed in the "FILES" section. If rwgroup finds
the file, it uses that path. If PLUGIN contains a slash or if
rwgroup does not find the file, rwgroup relies on your operating
system's dlopen(3) call to find the file. When the
SILK_PLUGIN_DEBUG environment variable is non-empty, rwgroup prints
status messages to the standard error as it attempts to find and
open each of its plug-ins.
--rec-threshold=THRESHOLD
Specify the minimum number of SiLK records a group must contain
before the records in the group are written to the output stream.
The default is 1; i.e., write all records. The maximum threshold
is 65535.
--group-offset=IP
Specify the value to write into the Next Hop IP for the records
that comprise the first group. The value IP may be an integer, or
an IPv4 or IPv6 address in the canonical presentation form. If not
specified, counting begins at 0. The value for each subsequent
group is incremented by 1.
--note-add=TEXT
Add the specified TEXT to the header of the output file as an
annotation. This switch may be repeated to add multiple
annotations to a file. To view the annotations, use the
rwfileinfo(1) tool.
--note-file-add=FILENAME
Open FILENAME and add the contents of that file to the header of
the output file as an annotation. This switch may be repeated to
add multiple annotations. Currently the application makes no
effort to ensure that FILENAME contains text; be careful that you
do not attempt to add a SiLK data file as an annotation.
--copy-input=PATH
Copy all binary input to the specified file or named pipe. PATH
can be "stdout" to print flows to the standard output as long as
the --output-path switch has been used to redirect rwgroup's
output.
--output-path=PATH
Determines where the output of rwgroup is written. If this option
is not given, output is written to the standard output.
--compression-method=COMP_METHOD
Specify how to compress the output. When this switch is not given,
output to the standard output or to named pipes is not compressed,
and output to files is compressed using the default chosen when
SiLK was compiled. The valid values for COMP_METHOD are determined
by which external libraries were found when SiLK was compiled. To
see the available compression methods and the default method, use
the --help or --version switch. SiLK can support the following
COMP_METHOD values when the required libraries are available.
none
Do not compress the output using an external library.
zlib
Use the zlib(3) library for compressing the output, and always
compress the output regardless of the destination. Using zlib
produces the smallest output files at the cost of speed.
lzo1x
Use the lzo1x algorithm from the LZO real time compression
library for compression, and always compress the output
regardless of the destination. This compression provides good
compression with less memory and CPU overhead.
best
Use lzo1x if available, otherwise use zlib. Only compress the
output when writing to a file.
--site-config-file=FILENAME
Read the SiLK site configuration from the named file FILENAME.
When this switch is not provided, rwgroup searches for the site
configuration file in the locations specified in the "FILES"
section.
--help
Print the available options and exit. Specifying switches that add
new fields or additional switches before --help will allow the
output to include descriptions of those fields or switches.
--help-fields
Print the description and alias(es) of each field and exit.
Specifying switches that add new fields before --help-fields will
allow the output to include descriptions of those fields.
--version
Print the version number and information about how SiLK was
configured, then exit the application.
--pmap-file=MAPNAME:PATH
--pmap-file=PATH
Instruct rwgroup to load the mapping file located at PATH and
create the src-MAPNAME and dst-MAPNAME fields. When MAPNAME is
provided explicitly, it will be used to refer to the fields
specific to that prefix map. If MAPNAME is not provided, rwgroup
will check the prefix map file to see if a map-name was specified
when the file was created. If no map-name is available, rwgroup
creates the fields sval and dval. Multiple --pmap-file switches
are supported as long as each uses a unique value for map-name.
The --pmap-fileswitch(es) must precede the --id-fields switch.
For more information, see pmapfilter(3).
--python-file=PATH
When the SiLK Python plug-in is used, rwgroup reads the Python code
from the file PATH to define additional fields that can be used as
part of the group key. This file should call register_field() for
each field it wishes to define. For details and examples, see the
silkpython(3) and pysilk(3) manual pages.
LIMITATIONSrwgroup requires sorted data. The application works by comparing
records in the order that the records are received (similar to the UNIX
uniq(1) command), odd orders will produce odd groupings.
EXAMPLES
In the following example, the dollar sign ("$") represents the shell
prompt. The text after the dollar sign represents the command line.
Lines have been wrapped for improved readability, and the back slash
("\") is used to indicate a wrapped line.
As a rule of thumb, the --id-fields and --delta-field parameters should
match rwsort(1)'s call, with --delta-field being the last parameter. A
call to group all web traffic by queries from the same addresses
(field=2) within 10 seconds (field=9) of the first query from that
address will be:
$ rwfilter --proto=6 --dport=80 --pass=stdout \
| rwsort --field=2,9 \
| rwgroup --id-field=2 --delta-field=9 --delta-value=10 \
--objective
ENVIRONMENT
PYTHONPATH
This environment variable is used by Python to locate modules.
When --python-file is specified, rwgroup must load the Python files
that comprise the PySiLK package, such as silk/__init__.py. If
this silk/ directory is located outside Python's normal search path
(for example, in the SiLK installation tree), it may be necessary
to set or modify the PYTHONPATH environment variable to include the
parent directory of silk/ so that Python can find the PySiLK
module.
SILK_PYTHON_TRACEBACK
When set, Python plug-ins will output traceback information on
Python errors to the standard error.
SILK_COUNTRY_CODES
This environment variable allows the user to specify the country
code mapping file that rwgroup uses when computing the scc and dcc
fields. The value may be a complete path or a file relative to the
SILK_PATH. See the "FILES" section for standard locations of this
file.
SILK_ADDRESS_TYPES
This environment variable allows the user to specify the address
type mapping file that rwgroup uses when computing the sType and
dType fields. The value may be a complete path or a file relative
to the SILK_PATH. See the "FILES" section for standard locations
of this file.
SILK_CLOBBER
The SiLK tools normally refuse to overwrite existing files.
Setting SILK_CLOBBER to a non-empty value removes this restriction.
SILK_CONFIG_FILE
This environment variable is used as the value for the
--site-config-file when that switch is not provided.
SILK_DATA_ROOTDIR
This environment variable specifies the root directory of data
repository. As described in the "FILES" section, rwgroup may use
this environment variable when searching for the SiLK site
configuration file.
SILK_PATH
This environment variable gives the root of the install tree. When
searching for configuration files and plug-ins, rwgroup may use
this environment variable. See the "FILES" section for details.
SILK_PLUGIN_DEBUG
When set to 1, rwgroup prints status messages to the standard error
as it attempts to find and open each of its plug-ins. In addition,
when an attempt to register a field fails, rwgroup prints a message
specifying the additional function(s) that must be defined to
register the field in rwgroup. Be aware that the output can be
rather verbose.
FILES
${SILK_ADDRESS_TYPES}
${SILK_PATH}/share/silk/address_types.pmap
${SILK_PATH}/share/address_types.pmap
/usr/local/share/silk/address_types.pmap
/usr/local/share/address_types.pmap
Possible locations for the address types mapping file required by
the sType and dType fields.
${SILK_CONFIG_FILE}
${SILK_DATA_ROOTDIR}/silk.conf
/data/silk.conf
${SILK_PATH}/share/silk/silk.conf
${SILK_PATH}/share/silk.conf
/usr/local/share/silk/silk.conf
/usr/local/share/silk.conf
Possible locations for the SiLK site configuration file which are
checked when the --site-config-file switch is not provided.
${SILK_COUNTRY_CODES}
${SILK_PATH}/share/silk/country_codes.pmap
${SILK_PATH}/share/country_codes.pmap
/usr/local/share/silk/country_codes.pmap
/usr/local/share/country_codes.pmap
Possible locations for the country code mapping file required by
the scc and dcc fields.
${SILK_PATH}/lib64/silk/
${SILK_PATH}/lib64/
${SILK_PATH}/lib/silk/
${SILK_PATH}/lib/
/usr/local/lib64/silk/
/usr/local/lib64/
/usr/local/lib/silk/
/usr/local/lib/
Directories that rwgroup checks when attempting to load a plug-in.
SEE ALSOrwfilter(1), rwfileinfo(1), rwsort(1), rwuniq(1), addrtype(3),
ccfilter(3), pmapfilter(3), pysilk(3), silkpython(3), silk-plugin(3),
sensor.conf(5), uniq(1), silk(7), yaf(1), dlopen(3), zlib(3)SiLK 3.11.0.1 2016-02-19 rwgroup(1)