sfe man page on SmartOS

Man page or keyword search:  
man Server   16655 pages
apropos Keyword Search (all sections)
Output format
SmartOS logo
[printable version]

SFE(7D)								       SFE(7D)

NAME
       sfe - SiS900 series Fast Ethernet device driver

SYNOPSIS
       /dev/sfe

DESCRIPTION
       The  sfe driver is a loadable, clonable, GLD-based  STREAMS driver sup‐
       porting the Data Link Provider Interface dlpi(7P) on Silicon Integrated
       Systems 900 series Fast Ethernet controllers.

APPLICATION PROGRAMMING INTERFACE
       The relevant fields returned as part of a DL_INFO_ACK response are:

	   o	  Maximum SDU is 1500.

	   o	  Minimum SDU is 0.

	   o	  The dlsap address length is 8.

	   o	  MAC type is DL_ETHER.

	   o	  SAP  length  is  -2. The 6-byte physical address is followed
		  immediately by a 2-byte SAP.

	   o	  Service mode is DL_CLDLS.

	   o	  Broadcast address is the 6-byte Ethernet  broadcast  address
		  (ff:ff:ff:ff:ff:ff).

       If  the	SAP provided is zero, then IEEE 802.3 mode is assumed and out‐
       bound frames will have the frame payload length written into  the  type
       field.	Likewise,  inbound frames with a SAP between zero and 1500 are
       interpreted as IEEE 802.3 frames and delivered to any streams that  are
       bound to SAP zero (the 802.3 SAP).

PROPERTIES
       The following properties	 may  be  configured  using  either ndd(1M) or
       the sfe.conf configuration file as described by driver.conf(4):

       adv_100fdx_cap

	   Enables the 100 Base TX full-duplex link option. (This is generally
	   the	fastest	 mode  if  both	 link partners support it. Most modern
	   equipment supports this mode.)

       adv_100hdx_cap

	   Enables the 100 Base TX half-duplex link  option.  (Typically  used
	   when the link partner is a 100 Mbps hub.)

       adv_10fdx_cap

	   Enables  the	 10  Base-T  full-duplex link option.  (This less-fre‐
	   quently used mode is typically used when the link partner is	 a  10
	   Mbps switch.)

       adv_10hdx_cap

	   Enables  the 10 Base-T half-duplex link option.  (This is the fall-
	   back when no other option is available.  It is typically used  when
	   the link partner is a 10 Mbps hub or is an older network card.)

ATTRIBUTES
       See attributes(5) for a description of the following attributes:

       ┌─────────────────────┬─────────────────┐
       │   ATTRIBUTE TYPE    │ ATTRIBUTE VALUE │
       ├─────────────────────┼─────────────────┤
       │Interface Stability  │ Committed       │
       └─────────────────────┴─────────────────┘

FILES
       /dev/sfe

	   Special character device.

       /kernel/drv/sfe

	   32-bit driver binary (x86).

       /kernel/drv/amd64/sfe

	   64-bit driver binary (x86).

       /kernel/drv/sparcv9/sfe

	   64-bit driver binary (SPARC).

       /kernel/drv/sfe.conf

	   Configuration file.

SEE ALSO
       ndd(1M), driver.conf(4), attributes(5), streamio(7I), dlpi(7P)

       IEEE 802.3 — Institute of Electrical and Electronics Engineers, 2002

				 Dec 12, 2007			       SFE(7D)
[top]

List of man pages available for SmartOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net