Man page or keyword search:   man All Sections 1 - General Commands 2 - System Calls 3 - Subroutines, Functions 4 - Special Files 5 - File Formats 6 - Games and Screensavers 7 - Macros and Conventions 8 - Maintenence Commands 9 - Kernel Interface New Commands Server 4.4BSD AIX Alpinelinux Archlinux Aros BSDOS BSDi Bifrost CentOS Cygwin Darwin Debian DigitalUNIX DragonFly ElementaryOS Fedora FreeBSD Gentoo GhostBSD HP-UX Haiku Hurd IRIX Inferno JazzOS Kali Knoppix LinuxMint MacOSX Mageia Mandriva Manjaro Minix MirBSD NeXTSTEP NetBSD OPENSTEP OSF1 OpenBSD OpenDarwin OpenIndiana OpenMandriva OpenServer OpenSuSE OpenVMS Oracle PC-BSD Peanut Pidora Plan9 QNX Raspbian RedHat Scientific Slackware SmartOS Solaris SuSE SunOS Syllable Tru64 UNIXv7 Ubuntu Ultrix UnixWare Xenix YellowDog aLinux   14857 pages apropos Keyword Search (all sections) Output format html ascii pdf view pdf save postscript

SG_SAT_SET_FEATURES(8)		   SG3_UTILS		SG_SAT_SET_FEATURES(8)

NAME
       sg_sat_set_features  -  use  ATA SET FEATURES command via a SCSI to ATA
       Translation (SAT) layer

SYNOPSIS
       sg_sat_set_features [--count=CO] [--ck_cond]  [--feature=FEA]  [--help]
       [--len=16|12] [--lba=LBA] [--verbose] [--version] DEVICE

DESCRIPTION
       This  utility  sends  an	 ATA SET FEATURES command to the DEVICE.  This
       command is used to change settings of ATA non-packet (i.e.  disks)  and
       packet  devices (e.g. cd/dvd drives). Rather than send the SET FEATURES
       command directly to the device it is sent via a SCSI transport which is
       assumed	to  contain  a SCSI to ATA Translation (SAT) Layer (SATL). The
       SATL may be in an operating system driver, in host bus adapter firmware
       or in some external enclosure.

       The SAT standard (SAT ANSI INCITS 431-2007, prior draft: sat-r09.pdf at
       www.t10.org) defines two SCSI "ATA PASS-THROUGH" commands: one using  a
       16  byte	 "cdb" and the other with a 12 byte cdb. This utility defaults
       to using the 16 byte cdb variant. SAT-2 is also a standard: SAT-2  ANSI
       INCITS  465-2010 and the draft prior to that is sat2r09.pdf . The SAT-3
       project has started and the most recent draft is sat3r01.pdf .

       The features can be read using the sg_sat_identify utility  which  uses
       either the ATA IDENTIFY DEVICE (for non-packet devices) or the IDENTIFY
       PACKET DEVICE (for packet devices) command.

OPTIONS
       Arguments to long options are mandatory for short options as well.

       -c, --count=CO
	      the number CO is placed in the "count" field in the ATA SET FEA‐
	      TURES  command. Only some subcommands (a term used for the value
	      placed in the "feature" field) require the  count	 field	to  be
	      set.  The default value placed in the "count" field is 0.

       -C, --ck_cond
	      sets  the	 CK_COND  bit  in  the	ATA PASS-THROUGH SCSI cdb. The
	      default setting is clear (i.e. 0).  When	set  the  SATL	should
	      yield  a	sense  buffer containing a ATA Result descriptor irre‐
	      spective of whether the ATA command succeeded  or	 failed.  When
	      clear the SATL should only yield a sense buffer containing a ATA
	      Result descriptor if the ATA command failed.

       -f, --feature=FEA
	      the value FEA is placed in the "feature" field in	 the  ATA  SET
	      FEATURES	command.  The  term "subcommand" is sometimes used for
	      this value. The default value placed in the "feature" field is 0
	      which is reserved and hence should not change anything. Two com‐
	      mon examples are 2h to enable the write cache and 82h to disable
	      it.

       -h, --help
	      outputs  the usage message summarizing command line options then
	      exits. Ignores DEVICE if given.

       -l, --len=16 | 12
	      this is the length of the SCSI cdb used for the ATA PASS-THROUGH
	      commands.	  The  argument can either be 16 or 12. The default is
	      16. Some SCSI transports cannot convey SCSI commands longer than
	      12 bytes.

       -L, --lba=LBA
	      the  number LBA is placed in the "lba" field in the ATA SET FEA‐
	      TURES command. Only some subcommands (a term used for the	 value
	      placed  in the "feature" field) require the lba field to be set.
	      This value is not a "logical block address" as the acronym might
	      imply.  The default value placed in the "lba" field is 0.

       -v, --verbose
	      increases the level or verbosity.

       -V, --version
	      print out version string

NOTES
       In  the	2.4  series of Linux kernels the DEVICE must be a SCSI generic
       (sg) device. In the 2.6 series block  devices  (e.g.  disks  and	 ATAPI
       DVDs) can also be specified. For example "sg_inq /dev/sda" will work in
       the 2.6 series kernels. From lk 2.6.6 other SCSI	 "char"	 device	 names
       may  be	used  as  well (e.g. "/dev/st0m"). Prior to lk 2.6.29 USB mass
       storage limited sense data to 18 bytes which made the --ck_cond	option
       yield strange (truncated) results.

EXIT STATUS
       The exit status of sg_sat_set_features is 0 when it is successful. Oth‐
       erwise see the sg3_utils(8) man page.

AUTHOR
       Written by Douglas Gilbert

REPORTING BUGS
       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT
       Copyright © 2007-2012 Douglas Gilbert
       This software is distributed under a FreeBSD license. There is NO  war‐
       ranty;  not  even  for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR‐
       POSE.

SEE ALSO
       sg_sat_identify(sg3_utils),     sg_inq(sg3_utils),      sdparm(sdparm),
       hdparm(hdparm)

sg3_utils-1.35			 November 2012		SG_SAT_SET_FEATURES(8)

Vote for polarhome