SHUTDOWN(8) BSD System Manager's Manual SHUTDOWN(8)NAMEshutdown — close down the system at a given time
SYNOPSISshutdown [-] [-h [-u] | -r | -s | -k] [-o [-n]] time
[warning-message ...]
DESCRIPTION
The shutdown utility provides an automated shutdown procedure for super-
users to nicely notify users when the system is shutting down, saving
them from system administrators, hackers, and gurus, who would otherwise
not bother with such niceties.
The following options are available:
-h The system is halted at the specified time.
-k Kick everybody off. The -k option does not actually halt the
system, but leaves the system multi-user with logins disabled
(for all but super-user).
-n If the -o is specified, prevent the file system cache from being
flushed by passing -n option to halt(8) or reboot(8). This
option should probably not be used.
-o If -h or -r is specified, shutdown will execute halt(8) or
reboot(8) instead of sending a signal to launchd(8).
-r The system is rebooted at the specified time.
-s The system is put to sleep at the specified time.
-u The system is halted up until the point of removing system power,
but waits before removing power for 5 minutes so that an external
UPS (uninterruptible power supply) can forcibly remove power.
This simulates a dirty shutdown to permit a later automatic power
on. OS X uses this mode automatically with supported UPSs in
emergency shutdowns.
time Time is the time at which shutdown will bring the system down and
may be the word now (indicating an immediate shutdown) or specify
a future time in one of two formats: +number, or yymmddhhmm,
where the year, month, and day may be defaulted to the current
system values. The first form brings the system down in number
minutes and the second at the absolute time specified.
warning-message
Any other arguments comprise the warning message that is broad‐
cast to users currently logged into the system.
- If ‘-’ is supplied as an option, the warning message is read from
the standard input.
At intervals, becoming more frequent as apocalypse approaches and start‐
ing at ten hours before shutdown, warning messages are displayed on the
terminals of all users logged in.
At shutdown time a message is written to the system log, containing the
time of shutdown, the person who initiated the shutdown and the reason.
Corresponding signal is then sent to launchd(8) to respectively halt,
reboot or bring the system down to single-user state (depending on the
above options).
A scheduled shutdown can be canceled by killing the shutdown process (a
SIGTERM should suffice).
SIGTERM TO SIGKILL INTERVAL
Upon shutdown, all running processes are sent a SIGTERM followed by a
SIGKILL. The SIGKILL will follow the SIGTERM by an intentionally inde‐
terminate period of time. Programs are expected to take only enough time
to flush all dirty data and exit. Developers are encouraged to file a
bug with the OS vendor, should they encounter an issue with this func‐
tionality.
SEE ALSOkill(1), login(1), wall(1), halt(8), launchd(8), reboot(8)BACKWARD COMPATIBILITY
The hours and minutes in the second time format may be separated by a
colon (``:'') for backward compatibility.
HISTORY
The shutdown utility appeared in 4.0BSD.
BSD December 11, 1998 BSD
