smp_rep_broadcast man page on OpenSuSE
[printable version]
SMP_REP_BROADCAST(8) SMP_UTILS SMP_REP_BROADCAST(8)
NAME
smp_rep_broadcast - invoke REPORT BROADCAST SMP function
SYNOPSIS
smp_rep_broadcast [--broadcast=BT] [--help] [--hex] [--inter‐
face=PARAMS] [--raw] [--sa=SAS_ADDR] [--verbose] [--version]
SMP_DEVICE[,N]
DESCRIPTION
Sends a SAS Serial Management Protocol (SMP) REPORT BROADCAST function
request to an SMP target. The SMP target is identified by the
SMP_DEVICE and the --sa=SAS_ADDR. Depending on the interface, the
SAS_ADDR may be deduced from the SMP_DEVICE. The mpt interface uses
SMP_DEVICE to identify a HBA (an SMP initiator) and needs the addi‐
tional ,N to differentiate between HBAs if there are multiple present.
OPTIONS
Mandatory arguments to long options are mandatory for short options as
well.
-b, --broadcast=BT
BT is the broadcast type, an integer in the range 0 (default) to
15. Broadcast (Change) corresponds to 0. Other known broadcast
types are listed in the NOTES section. BT may be decimal
(default) or hexadecimal prefixed by '0x' (or '0X') or with a
'h' (or 'H') suffix.
-h, --help
output the usage message then exit.
-H, --hex
output the response (less the CRC field) in hexadecimal.
-I, --interface=PARAMS
interface specific parameters. In this case "interface" refers
to the path through the operating system to the SMP initiator.
See the smp_utils man page for more information.
-r, --raw
send the response (less the CRC field) to stdout in binary. All
error messages are sent to stderr.
-s, --sa=SAS_ADDR
specifies the SAS address of the SMP target device. The mpt
interface needs this option and it will typically be an
expander's SAS address. The SAS_ADDR is in decimal but most SAS
addresses are shown in hexadecimal. To give a number in hexa‐
decimal either prefix it with '0x' or put a trailing 'h' on it.
-v, --verbose
increase the verbosity of the output. Can be used multiple
times.
-V, --version
print the version string and then exit.
NOTES
The following is a list of broadcast types:
0 Broadcast (Change)
1 Broadcast (Reserved change 0)
2 Broadcast (Reserved change 1)
3 Broadcast (SES)
4 Broadcast (Expander)
5 Broadcast (Asynchronous event)
6 Broadcast (Reserved 3)
7 Broadcast (Reserved 4)
8 Broadcast (Zone activate)
The remaining zone types (9 to 15) may be issued by the ZONED BROADCAST
function.
CONFORMING TO
The SMP REPORT BROADCAST function was introduced in SAS-2 .
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright © 2011 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO war‐
ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR‐
POSE.
SEE ALSO
smp_utils, smp_zoned_broadcast(smp_utils)
smp_utils-0.96 June 2011 SMP_REP_BROADCAST(8)
[top]
List of man pages available for OpenSuSE
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
|
Vote for polarhome
|
