SMPQUERY(8) Open IB Diagnostics SMPQUERY(8)NAME
SMPQUERY -
query InfiniBand subnet management attributes
SYNOPSIS
smpquery [options] <op> <dest dr_path|lid|guid> [op params]
DESCRIPTION
smpquery allows a basic subset of standard SMP queries including the
following: node info, node description, switch info, port info. Fields
are displayed in human readable format.
OPTIONS
Current supported operations and their parameters:
:: nodeinfo <addr> nodedesc <addr> portinfo <addr> [<portnum>]
# default port is zero switchinfo <addr> pkeys <addr> [<port‐
num>] sl2vl <addr> [<portnum>] vlarb <addr> [<portnum>] guids
<addr> mlnxextportinfo <addr> [<portnum>] # default port is
zero
-c, --combined
Use Combined route address argument <lid> <DR_Path>
-x, --extended
Set SMSupportsExtendedSpeeds bit 31 in AttributeModifier (only
impacts PortInfo queries).
-K, --show_keys
show security keys (mkey, smkey, etc.) associated with the
request.
Addressing Flags
-D, --Direct The address specified is a directed route
Examples:
[options] -D [options] "0" # self port
[options] -D [options] "0,1,2,1,4" # out via port 1, then 2, ...
(Note the second number in the path specified must match the port being
used. This can be specified using the port selection flag '-P' or the
port found through the automatic selection process.)
-G, --Guid The address specified is a Port GUID
-L, --Lid The address specified is a LID
-s, --sm_port <smlid> use 'smlid' as the target lid for SA queries.
Port Selection flags
-C, --Ca <ca_name> use the specified ca_name.
-P, --Port <ca_port> use the specified ca_port.
Local port Selection
Multiple port/Multiple CA support: when no IB device or port is speci‐
fied (see the "local umad parameters" below), the libibumad library
selects the port to use by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the libibumad library
attempts to fulfill the user request, and will fail if it is not
possible.
For example:
ibaddr # use the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from "mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.
Debugging flags
-d raise the IB debugging level. May be used several times (-ddd
or -d -d -d).
-e show send and receive errors (timeouts and others)
-h, --help show the usage message
-v, --verbose
increase the application verbosity level. May be used several
times (-vv or -v -v -v)
-V, --version show the version info.
Configuration flags
-t, --timeout <timeout_ms> override the default timeout for the
solicited mads.
--node-name-map <node-name-map> Specify a node name map.
This file maps GUIDs to more user friendly names. See FILES sec‐
tion.
-y, --m_key <key>
use the specified M_key for requests. If non-numeric value (like
'x') is specified then a value will be prompted for.
--config, -z <config_file> Specify alternate config file.
Default: /etc/infiniband-diags/ibdiag.conf
FILES
CONFIG FILE
/etc/infiniband-diags/ibdiag.conf
A global config file is provided to set some of the common options for
all tools. See supplied config file for details.
NODE NAME MAP FILE FORMAT
The node name map is used to specify user friendly names for nodes in
the output. GUIDs are used to perform the lookup.
This functionality is provided by the opensm-libs package. See
opensm(8) for the file location for your installation.
Generically:
# comment
<guid> "<name>"
Example:
# IB1
# Line cards
0x0008f104003f125c "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f125d "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f10d2 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f10d3 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f10bf "IB1 (Rack 11 slot 12 ) ISR9288/ISR9096 Voltaire sLB-24D"
# Spines
0x0008f10400400e2d "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e2e "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e2f "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e31 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e32 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB-12D"
# GUID Node Name
0x0008f10400411a08 "SW1 (Rack 3) ISR9024 Voltaire 9024D"
0x0008f10400411a28 "SW2 (Rack 3) ISR9024 Voltaire 9024D"
0x0008f10400411a34 "SW3 (Rack 3) ISR9024 Voltaire 9024D"
0x0008f104004119d0 "SW4 (Rack 3) ISR9024 Voltaire 9024D"
EXAMPLES
:: smpquery portinfo 3 1 # portinfo by lid,
with port modifier smpquery-G switchinfo 0x2C9000100D051 1 #
switchinfo by guid smpquery-D nodeinfo 0 #
nodeinfo by direct route smpquery-c nodeinfo 6 0,12
# nodeinfo by combined route
SEE ALSO
smpdump (8)
AUTHOR
Hal Rosenstock
< hal@mellanox.com >
SMPQUERY(8)
