SNTOP(1) BSD General Commands Manual SNTOP(1)NAMEsntop — top-like console network status tool
SYNOPSISsntop [options]
DESCRIPTIONsntop (simple network top) is a console utility, in the spirit of top,
that polls a list of hosts at a regular interval to determine if they are
online, displaying the results in a formatted table. This list is read
on load from a config file, sntoprc, located (by default) in ~/ or /etc.
The polling is done via ICMP ping (1)
Optionally, the results can be used to generate an html page or ellicit
the execution of a file.
Interactive run-time commands exist:
q - quit
r - reload config file
w - toggle html page generation
any other key - force a refresh
COMMAND-LINE PARAMETERS
-d, --daemon - daemon mode: make sntop capable of running in the back‐
ground. note, it wont automatically fork into the background.
-o, --once - poll and display results once, then exit
-c, --nocolor - toggle the use of ncurses color for pretty formatting
-p, --ping - use 'ping' in lieu of 'fping'. note, ping (in particular on
DOWN hosts) is slower than fping -- the performance of sntop will suffer.
-w, --html - generate html output of results
-s, --secure - secure mode. command keys are disabled. SIGINT must be
used to terminate the program. this allows sntop to run nicely on spare
terminals galore. something like the following in /etc/passwd can facil‐
itate that:
sntop:x:123:123:sntop:/:/usr/local/bin/sntop -s
-e <file>, --wfile=file - output html to <file> instead of sntop.html
-f <file>, --conf=file - read conf data from <file> instead of ~/.snto‐
prc. note, sntop will still try to read from /etc/sntoprc if <file>
fails. if both fail, sntop will exit.
-r <time>, --refresh=time - refresh every <time> seconds instead of 180
-a <file>, --alarm=file - alarm mode: execute <file> when a site first
goes DOWN
-l <file>, --log=file - log mode: execute <file> whenever the status of a
site changes
-b <bytes>, --byte=bytes - Number of bytes of ping data to send
-v, --version - display version information and exit
-h, --help - display command-syntax help and exit
Command Execution Syntax
In alarm or log mode a file is executed on the occurence of change in
status of a given host. sntop will fork and exec the specified file,
passing as arguments information about the event. those arguments are:
<display name of host> <host name/IP> <status>
<display name of host> the 'display' name (first sntop collumn) of the
machine, ie "MyBox"
<host name/IP> the explicit hostname or IP address of the machine, ie
"snaggle" or "192.168.55.12"
<status> the new status of the machine, "UP" or "DOWN," this would obvi‐
ously always be DOWN for alarm mode
Note, DOWN hosts will be logged in both modes upon load (ie, if they are
down when sntop loads, <file> is executed). No action is taken in any
modes for hosts that originate as UP -- thus, the default status is UP.
We execute an external file to remain in the UNIX tradition -- small,
simple programs that do one thing damn well. Thus, a logging option is
not even provided -- a two-line shell script will do fine, there. How‐
ever, the possibilities are powerful: administrator paging, for instance.
See alarm.sh for an example script.
FILES
~/.sntoprc default config file location
/etc/sntoprc if a user's config is not found, this system-wide one is
read
/usr/man/man1/sntop.1.gz the man page
alarm.sh sample alarm-execute script
/usr/local/bin/sntop the sntop executable
CONFIG FILE
An example config file, sntoprc.EXAMPLE, is included in the standard dis‐
tribution. However, the config file syntax is simple. Entries are
RETURN terminated. Trailing whitespace is ignored. '#' signifies a com‐
ment and can be used inline. By default, upto 32 characters will be
read, per line. All entries should be a single word, except comments.
The syntax:
Display Name
IP or host
Display Comments
Example:
Jimi
192.168.23.1
linux/sparc; firewall, http, ftp
sntop will first attempt to read the config file from ~/.sntoprc (or
another location specified by -f). If that fails, the system config file
will be read from /etc/sntoprc. If both fail, sntop will exit.
AUTHORSsntop was written by Robert M. Love <rml@tech9.net> and Christopher M.
Rivera <cmrivera@ufl.edu>. Send us bug reports, suggestions, and hard‐
ware.
SEE ALSO
top (1), ping (1), fping (1)
March 6, 2001
