STUNNEL(8)stunnelSTUNNEL(8)NAMEstunnel - universal SSL tunnel
SYNOPSIS
Unix:
stunnel [<filename>] | -fd n | -help | -version | -sockets
WIN32:
stunnel [ [-install | -uninstall | -start | -stop] | -exit]
[-quiet] [<filename>] ] | -help | -version | -sockets
DESCRIPTION
The stunnel program is designed to work as SSL encryption wrapper
between remote clients and local (inetd-startable) or remote servers.
The concept is that having non-SSL aware daemons running on your system
you can easily set them up to communicate with clients over secure SSL
channels.
stunnel can be used to add SSL functionality to commonly used Inetd
daemons like POP-2, POP-3, and IMAP servers, to standalone daemons like
NNTP, SMTP and HTTP, and in tunneling PPP over network sockets without
changes to the source code.
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)
OPTIONS
<filename>
Use specified configuration file
-fd n (Unix only)
Read the config file from specified file descriptor
-help
Print stunnel help menu
-version
Print stunnel version and compile time defaults
-sockets
Print default socket options
-install (NT/2000/XP only)
Install NT Service
-uninstall (NT/2000/XP only)
Uninstall NT Service
-start (NT/2000/XP only)
Start NT Service
-stop (NT/2000/XP only)
Stop NT Service
-exit (Win32 only)
Exit an already started stunnel-quiet (NT/2000/XP only)
Don't display any message boxes
CONFIGURATION FILE
Each line of the configuration file can be either:
· an empty line (ignored)
· a comment starting with ';' (ignored)
· an 'option_name = option_value' pair
· '[service_name]' indicating a start of a service definition
An address parameter of an option may be either:
· a port number
· a colon-separated pair of IP address (either IPv4, IPv6, or domain
name) and port number
· a Unix socket path (Unix only)
GLOBAL OPTIONS
chroot = directory (Unix only)
directory to chroot stunnel process
chroot keeps stunnel in chrooted jail. CApath, CRLpath, pid and
exec are located inside the jail and the patches have to be
relative to the directory specified with chroot.
compression = zlib | rle
select data compression algorithm
default: no compression
zlib compression of OpenSSL 0.9.8 or above is not backward
compatible with OpenSSL 0.9.7.
rle compression is currently not implemented by the OpenSSL
library.
debug = [facility.]level
debugging level
Level is a one of the syslog level names or numbers emerg (0),
alert (1), crit (2), err (3), warning (4), notice (5), info (6), or
debug (7). All logs for the specified level and all levels
numerically less than it will be shown. Use debug = debug or debug
= 7 for greatest debugging output. The default is notice (5).
The syslog facility 'authpriv' will be used unless a facility name
is supplied. (Facilities are not supported on Win32.)
Case is ignored for both facilities and levels.
EGD = egd path (Unix only)
path to Entropy Gathering Daemon socket
Entropy Gathering Daemon socket to use to feed OpenSSL random
number generator. (Available only if compiled with OpenSSL 0.9.5a
or higher)
engine = auto | <engine id>
select hardware engine
default: software-only cryptography
Here is an example of advanced engine configuration to read private
key from an OpenSC engine
engine=dynamic
engineCtrl=SO_PATH:/usr/lib/opensc/engine_pkcs11.so
engineCtrl=ID:pkcs11
engineCtrl=LIST_ADD:1
engineCtrl=LOAD
engineCtrl=MODULE_PATH:/usr/lib/pkcs11/opensc-pkcs11.so
engineCtrl=INIT
[service]
engineNum=1
key=id_45
engineCtrl = command[:parameter]
control hardware engine
Special commands "LOAD" and "INIT" can be used to load and
initialize the engine cryptogaphic module.
fips = yes | no
Enable or disable FIPS 140-2 mode.
This option allows to disable entering FIPS mode if stunnel was
compiled with FIPS 140-2 support.
default: yes
foreground = yes | no (Unix only)
foreground mode
Stay in foreground (don't fork) and log to stderr instead of via
syslog (unless output is specified).
default: background in daemon mode
output = file
append log messages to a file
/dev/stdout device can be used to send log messages to the standard
output (for example to log them with daemontools splogger).
pid = file (Unix only)
pid file location
If the argument is empty, then no pid file will be created.
pid path is relative to chroot directory if specified.
RNDbytes = bytes
bytes to read from random seed files
Number of bytes of data read from random seed files. With SSL
versions less than 0.9.5a, also determines how many bytes of data
are considered sufficient to seed the PRNG. More recent OpenSSL
versions have a builtin function to determine when sufficient
randomness is available.
RNDfile = file
path to file with random seed data
The SSL library will use data from this file first to seed the
random number generator.
RNDoverwrite = yes | no
overwrite the random seed files with new random data
default: yes
service = servicename (Unix only)
use specified string as inetd mode service name for TCP Wrapper
library
default: stunnel
setgid = groupname (Unix only)
setgid() to groupname in daemon mode and clears all other groups
setuid = username (Unix only)
setuid() to username in daemon mode
socket = a|l|r:option=value[:value]
Set an option on accept/local/remote socket
The values for linger option are l_onof:l_linger. The values for
time are tv_sec:tv_usec.
Examples:
socket = l:SO_LINGER=1:60
set one minute timeout for closing local socket
socket = r:SO_OOBINLINE=yes
place out-of-band data directly into the
receive data stream for remote sockets
socket = a:SO_REUSEADDR=no
disable address reuse (enabled by default)
socket = a:SO_BINDTODEVICE=lo
only accept connections on loopback interface
syslog = yes | no (Unix only)
enable logging via syslog
default: yes
taskbar = yes | no (WIN32 only)
enable the taskbar icon
default: yes
SERVICE-LEVEL OPTIONS
Each configuration section begins with service name in square brackets.
The service name is used for libwrap (TCP Wrappers) access control and
lets you distinguish stunnel services in your log files.
Note that if you wish to run stunnel in inetd mode (where it is
provided a network socket by a server such as inetd, xinetd, or
tcpserver) then you should read the section entitled INETD MODE below.
accept = address
accept connections on specified address
If no host specified, defaults to all IPv4 addresses for the local
host.
To listen on all IPv6 addresses use:
connect = :::port
CApath = directory
Certificate Authority directory
This is the directory in which stunnel will look for certificates
when using the verify. Note that the certificates in this
directory should be named XXXXXXXX.0 where XXXXXXXX is the hash
value of the DER encoded subject of the cert.
The hash algorithm has been changed in OpenSSL 1.0.0. It is
required to c_rehash the directory on upgrade from OpenSSL 0.x.x to
OpenSSL 1.x.x.
CApath path is relative to chroot directory if specified.
CAfile = certfile
Certificate Authority file
This file contains multiple CA certificates, used with the verify.
cert = pemfile
certificate chain PEM file name
A PEM is always needed in server mode. Specifying this flag in
client mode will use this certificate chain as a client side
certificate chain. Using client side certs is optional. The
certificates must be in PEM format and must be sorted starting with
the certificate to the highest level (root CA).
ciphers = cipherlist
Select permitted SSL ciphers
A colon delimited list of the ciphers to allow in the SSL
connection. For example DES-CBC3-SHA:IDEA-CBC-MD5
client = yes | no
client mode (remote service uses SSL)
default: no (server mode)
connect = address
connect to a remote address
If no host is specified, the host defaults to localhost.
Multiple connect options are allowed in a single service section.
If host resolves to multiple addresses and/or if multiple connect
options are specified, then the remote address is chosen using a
round-robin algorithm.
CRLpath = directory
Certificate Revocation Lists directory
This is the directory in which stunnel will look for CRLs when
using the verify. Note that the CRLs in this directory should be
named XXXXXXXX.r0 where XXXXXXXX is the hash value of the CRL.
The hash algorithm has been changed in OpenSSL 1.0.0. It is
required to c_rehash the directory on upgrade from OpenSSL 0.x.x to
OpenSSL 1.x.x.
CRLpath path is relative to chroot directory if specified.
CRLfile = certfile
Certificate Revocation Lists file
This file contains multiple CRLs, used with the verify.
curve = nid
specify ECDH curve name
To get a list of supported cuves use:
openssl ecparam -list_curves
default: prime256v1
delay = yes | no
delay DNS lookup for 'connect' option
This option is useful for dynamic DNS, or when DNS is not available
during stunnel startup (road warrior VPN, dial-up configurations).
engineNum = engine number
select engine number to read private key
The engines are numbered starting from 1.
exec = executable_path
execute local inetd-type program
exec path is relative to chroot directory if specified.
execargs = $0 $1 $2 ...
arguments for exec including program name ($0)
Quoting is currently not supported. Arguments are separated with
arbitrary number of whitespaces.
failover = rr | prio
Failover strategy for multiple "connect" targets.
rr (round robin) - fair load distribution
prio (priority) - use the order specified in config file
default: rr
ident = username
use IDENT (RFC 1413) username checking
key = keyfile
private key for certificate specified with cert option
Private key is needed to authenticate certificate owner. Since
this file should be kept secret it should only be readable to its
owner. On Unix systems you can use the following command:
chmod 600 keyfile
default: value of cert option
libwrap = yes | no
Enable or disable the use of /etc/hosts.allow and /etc/hosts.deny.
default: yes
local = host
IP of the outgoing interface is used as source for remote
connections. Use this option to bind a static local IP address,
instead.
sni = service_name:server_name
Use the service as a slave service (a name-based virtual server)
for Server Name Indication TLS extension (RFC 3546).
service_name specifies the master service that accepts client
connections with accept option. server_name specifies the host
name to be redirected. Multiple slave services are normally
specified for a single master service. sni option can also be
specified more than once within a single slave service.
This service, as well as the master service, may not be configured
in client mode. connect option of the slave service is ignored
when protocol option is specified, as protocol connects remote host
before TLS handshake. Libwrap checks (Unix only) are performed
twice: with master service name after TCP connection is accepted,
and with slave service name during TLS handshake.
Option sni is only available when compiled with OpenSSL 1.0.0 and
later.
OCSP = url
select OCSP server for certificate verification
OCSPflag = flag
specify OCSP server flag
Several OCSPflag can be used to specify multiple flags.
currently supported flags: NOCERTS, NOINTERN NOSIGS, NOCHAIN,
NOVERIFY, NOEXPLICIT, NOCASIGN, NODELEGATED, NOCHECKS, TRUSTOTHER,
RESPID_KEY, NOTIME
options = SSL_options
OpenSSL library options
The parameter is the OpenSSL option name as described in the
SSL_CTX_set_options(3ssl) manual, but without SSL_OP_ prefix.
Several options can be used to specify multiple options.
For example for compatibility with erroneous Eudora SSL
implementation the following option can be used:
options = DONT_INSERT_EMPTY_FRAGMENTS
protocol = proto
application protocol to negotiate SSL (e.g. starttls or stls)
protocol option should not be used with SSL encryption on a
separate port.
Currently supported protocols:
cifs
Proprietary (undocummented) extension of CIFS protocol
implemented in Samba. Support for this extension was dropped
in Samba 3.0.0.
connect
Based on RFC 2817 - Upgrading to TLS Within HTTP/1.1, section
5.2 - Requesting a Tunnel with CONNECT
This protocol is only supported in client mode.
imap
Based on RFC 2595 - Using TLS with IMAP, POP3 and ACAP
nntp
Based on RFC 4642 - Using Transport Layer Security (TLS) with
Network News Transfer Protocol (NNTP)
This protocol is only supported in client mode.
pgsql
Based on
http://www.postgresql.org/docs/8.3/static/protocol-flow.html#AEN73982
pop3
Based on RFC 2449 - POP3 Extension Mechanism
proxy
Haproxy client IP address
http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt
smtp
Based on RFC 2487 - SMTP Service Extension for Secure SMTP over
TLS
protocolAuthentication = auth_type
authentication type for protocol negotiations
currently supported: basic, NTLM
Currently authentication type only applies to 'connect' protocol.
default: basic
protocolHost = host:port
destination address for protocol negotiations
protocolPassword = password
password for protocol negotiations
protocolUsername = username
username for protocol negotiations
pty = yes | no (Unix only)
allocate pseudo terminal for 'exec' option
retry = yes | no (Unix only)
reconnect a connect+exec section after it's disconnected
default: no
session = timeout
session cache timeout
sessiond = host:port
address of sessiond SSL cache server
sslVersion = version
select version of SSL protocol
Allowed options: all, SSLv2, SSLv3, TLSv1
stack = bytes (except for FORK model)
thread stack size
TIMEOUTbusy = seconds
time to wait for expected data
TIMEOUTclose = seconds
time to wait for close_notify (set to 0 for buggy MSIE)
TIMEOUTconnect = seconds
time to wait to connect a remote host
TIMEOUTidle = seconds
time to keep an idle connection
transparent = none | source | destination | both (Unix only)
enable transparent proxy support on selected platforms
Supported values:
none
Disable transparent proxy support. This is the default.
source
Re-write address to appear as if wrapped daemon is connecting
from the SSL client machine instead of the machine running
stunnel.
This option is currently available in:
Remote mode (connect option) on Linux >=2.6.28
This configuration requires stunnel to be executed as root
and without setuid option.
This configuration requires the following setup for
iptables and routing (possibly in /etc/rc.local or
equivalent file):
iptables -t mangle -N DIVERT
iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT
iptables -t mangle -A DIVERT -j MARK --set-mark 1
iptables -t mangle -A DIVERT -j ACCEPT
ip rule add fwmark 1 lookup 100
ip route add local 0.0.0.0/0 dev lo table 100
echo 0 >/proc/sys/net/ipv4/conf/lo/rp_filter
stunnel must also to be executed as root and without setuid
option.
Remote mode (connect option) on Linux 2.2.x
This configuration requires kernel to be compiled with
transparent proxy option. Connected service must be
installed on a separate host. Routing towards the clients
has to go through the stunnel box.
stunnel must also to be executed as root and without setuid
option.
Remote mode (connect option) on FreeBSD >=8.0
This configuration requires additional firewall and routing
setup. stunnel must also to be executed as root and
without setuid option.
Local mode (exec option)
This configuration works by pre-loading libstunnel.so
shared library. _RLD_LIST environment variable is used on
Tru64, and LD_PRELOAD variable on other platforms.
destination
Original destination is used instead of connect option.
A service section for transparent destination may look like
this:
[transparent]
client=yes
accept=<stunnel_port>
transparent=destination
This configuration requires the following setup for iptables
(possibly in /etc/rc.local or equivalent file):
/sbin/iptables -I INPUT -i eth0 -p tcp --dport <stunnel_port> -j ACCEPT
/sbin/iptables -t nat -I PREROUTING -i eth0 -p tcp --dport <redirected_port> -j DNAT --to-destination <local_ip>:<stunnel_port>
Transparent destination option is currently only supported on
Linux.
both
Use both source and destination transparent proxy.
Two legacy options are also supported for backward compatibility:
yes This options has been renamed to source.
no This options has been renamed to none.
verify = level
verify peer certificate
level 0 - request and ignore peer certificate
level 1 - verify peer certificate if present
level 2 - verify peer certificate
level 3 - verify peer with locally installed certificate
default - no verify
It is important to understand, that this option was solely designed
for access control and not for authorization. Specifically for
level 2 every non-revoked certificate is accepted regardless of its
Common Name. For this reason a dedicated CA should be used with
level 2, and not a generic CA commonly used for webservers. Level
3 is preferred for point-to-point connections.
RETURN VALUEstunnel returns zero on success, non-zero on error.
SIGNALS
The following signals can be used to control stunnel in Unix
environment:
SIGHUP
Force a reload of the configuration file.
Some global options will not be reloaded:
· chroot
· fips
· foreground
· pid
· setgid
· setuid
The use of 'setuid' option will also prevent stunnel from binding
privileged (<1024) ports during configuration reloading.
When 'chroot' option is used, stunnel will look for all its files
(including configuration file, certificates, log file and pid file)
within the chroot jail.
SIGUSR1
Close and reopen stunnel log file. This function can be used for
log rotation.
SIGTERM, SIGQUIT, SIGINT
Shut stunnel down.
The result of sending any other signals to the server is undefined.
EXAMPLES
In order to provide SSL encapsulation to your local imapd service, use
[imapd]
accept = 993
exec = /usr/sbin/imapd
execargs = imapd
If you want to provide tunneling to your pppd daemon on port 2020, use
something like
[vpn]
accept = 2020
exec = /usr/sbin/pppd
execargs = pppd local
pty = yes
If you want to use stunnel in inetd mode to launch your imapd process,
you'd use this stunnel.conf. Note there must be no [service_name]
section.
exec = /usr/sbin/imapd
execargs = imapd
NOTES
RESTRICTIONS
stunnel cannot be used for the FTP daemon because of the nature of the
FTP protocol which utilizes multiple ports for data transfers. There
are available SSL enabled versions of FTP and telnet daemons, however.
INETD MODE
The most common use of stunnel is to listen on a network port and
establish communication with either a new port via the connect option,
or a new program via the exec option. However there is a special case
when you wish to have some other program accept incoming connections
and launch stunnel, for example with inetd, xinetd, or tcpserver.
For example, if you have the following line in inetd.conf:
imaps stream tcp nowait root /usr/bin/stunnel stunnel /etc/stunnel/imaps.conf
In these cases, the inetd-style program is responsible for binding a
network socket (imaps above) and handing it to stunnel when a
connection is received. Thus you do not want stunnel to have any
accept option. All the Service Level Options should be placed in the
global options section, and no [service_name] section will be present.
See the EXAMPLES section for example configurations.
CERTIFICATES
Each SSL enabled daemon needs to present a valid X.509 certificate to
the peer. It also needs a private key to decrypt the incoming data. The
easiest way to obtain a certificate and a key is to generate them with
the free OpenSSL package. You can find more information on certificates
generation on pages listed below.
The order of contents of the .pem file is important. It should contain
the unencrypted private key first, then a signed certificate (not
certificate request). There should be also empty lines after
certificate and private key. Plaintext certificate information
appended on the top of generated certificate should be discarded. So
the file should look like this:
-----BEGIN RSA PRIVATE KEY-----
[encoded key]
-----END RSA PRIVATE KEY-----
[empty line]
-----BEGIN CERTIFICATE-----
[encoded certificate]
-----END CERTIFICATE-----
[empty line]
RANDOMNESS
stunnel needs to seed the PRNG (pseudo random number generator) in
order for SSL to use good randomness. The following sources are loaded
in order until sufficient random data has been gathered:
· The file specified with the RNDfile flag.
· The file specified by the RANDFILE environment variable, if set.
· The file .rnd in your home directory, if RANDFILE not set.
· The file specified with '--with-random' at compile time.
· The contents of the screen if running on Windows.
· The egd socket specified with the EGD flag.
· The egd socket specified with '--with-egd-sock' at compile time.
· The /dev/urandom device.
With recent (>=OpenSSL 0.9.5a) version of SSL it will stop loading
random data automatically when sufficient entropy has been gathered.
With previous versions it will continue to gather from all the above
sources since no SSL function exists to tell when enough data is
available.
Note that on Windows machines that do not have console user interaction
(mouse movements, creating windows, etc.) the screen contents are not
variable enough to be sufficient, and you should provide a random file
for use with the RNDfile flag.
Note that the file specified with the RNDfile flag should contain
random data -- that means it should contain different information each
time stunnel is run. This is handled automatically unless the
RNDoverwrite flag is used. If you wish to update this file manually,
the openssl rand command in recent versions of OpenSSL, would be
useful.
One important note -- if /dev/urandom is available, OpenSSL has a habit
of seeding the PRNG with it even when checking the random state, so on
systems with /dev/urandom you're likely to use it even though it's
listed at the very bottom of the list above. This isn't stunnel's
behaviour, it's OpenSSLs.
DH PARAMETERS
Stunnel 4.40 and later contains hardcoded 2048-bit DH parameters.
It is also possible to specify DH parameters in the certificate file:
openssl dhparam 2048 >> stunnel.pem
DH parameter generation may take several minutes.
FILES
stunnel.conf
stunnel configuration file
BUGS
Option execargs does not support quoting.
SEE ALSOtcpd(8)
access control facility for internet services
inetd(8)
internet 'super-server'
http://www.stunnel.org/
stunnel homepage
http://www.openssl.org/
OpenSSL project website
AUTHOR
Michał Trojnara
<Michal.Trojnara@mirt.net>
4.50 2011.11.28 STUNNEL(8)
