SUBMIT(8) Double Precision, Inc. SUBMIT(8)NAMEsubmit - Submit a new message to the Courier mail server
SYNOPSIS
/usr/local/bin/submit [-expn=address] [-vrfy=address] [-bcc] [-delay=n]
{module} {"type; hostid"}
DESCRIPTION
The submit program submits messages to the Courier mail server for
processing. The submit program is not intended to be invoked by the end
user. It is used by the Courier mail server input modules only. The
submit program´s global read and execute permissions are turned off, so
that it can only be executed by a process that´s a member of the
courier group. submit is installed in the /usr/local/libexec/courier
directory.
submit always takes two command line arguments after any options:
module
This argument identifies the module that´s running the submit
command. It must be one of the module names that the Courier mail
server knows about, such as local, or esmtp. This argument
determines address rewriting rules.
"type; hostid"
This single argument identifies the source of the message, and must
be suitable for the Remote-MTA: header in delivery status
notifications, as specified by RFC 1894. For messages that are
received via ESMTP, this argument is typically "dns; helohost
(hostname [ip.address])".
The submit program takes the following options:
-expn=address
Do not accept a message, instead "expand" the given address. If the
specified address matches a locally-defined alias, submit prints
the addresses this address expands to. If the specified address
does not match a locally-defined alias, the address is displayed by
itself.
-vrvy=address
Do not accept a message, instead verify the given address. submit
prints a suitable message and sets the exit code to indicate
whether the specified address is valid, or not. If the address
matches a local alias, submit will indicate a valid address, and
exit. If the address does not match a local alias, submit checks if
this address is deliverable by any output protocol module. If so,
submit will indicate a valid address, and exit. Otherwise, submit
prints a "User unknown" error message, and exits.
-bcc
If no recipients are given, obtain the list of recipients from Bcc:
headers only. Normally, if no recipients are specified, submit
reads the list of recipients from the To:, Cc: and Bcc: headers
(Bcc: headers are always removed). The -bcc option ignores To: and
Cc: headers for this purpose. This option is ignored if an explicit
recipient list is specified (see below).
-delay=n
Wait n seconds before delivering the message. If not specified,
delivery begins after waiting the amount of time specified by the
/usr/local/etc/courier/submitdelay configuration time (default: 0
seconds -- immediate delivery).
RESPONSES FROM SUBMIT
All replies from submit follow the format of SMTP responses, as defined
in RFC822.
To summarize: the responses are one or more lines long. Every line in
the response instead of the last one consists of a three-digit
numerical code, a dash, then arbitrary text. The last line (or the only
line of the response) starts with a three-digit numerical code, a
single space, and arbitrary text. The first digit of the numerical code
indicates whether the response indicates success, or failure. If the
first digit is 5, the response indicates a permanent failure. If the
first digit is 4, the response indicates a temporary failure (the
message or the address should be resubmitted later). If the first digit
is not 4 or 5, the response indicates success, or acceptance.
MESSAGE SUBMISSION
Unless either -expn or -vrfy option is specified, submit reads the
message envelope and contents from standard input, as follows. All
input and output to submit consists of newline-terminated (NOT carriage
return/newline terminated) lines of text.
submit reads the first line of text, which specifies the envelope
sender address. The line is formatted as follows:
address<tab>format<tab>envid
<tab> is the ASCII tab character. The address may be an empty string,
optionally followed by tab, then "format", another tab, then "envid".
format is one or more chatacters that specify delivery status
notification processing, and other message options. The ´F´ character
specifies that delivery status notifications should include the entire
message, ´H´ specifies just the headers of the message should be
included. Absence of either ´F´ or ´H´ specifies no preference.
"S{keyword}" specifies the optional SECURITY extension keyword for this
message. The ´V´ character in format sets the VERP extension flag for
this message.
envid is the original message envelope ID, that will be shown on any
delivery status notifications. NOTE: envid must be specified using
xtext encoding (see the relevant RFCs).
After reading the first line of text, submit prints a response (see
"RESPONSES FROM SUBMIT", above). If the response is a failure, submit
terminates immediately. Otherwise, submit then reads one or more
envelope recipients.
Each envelope recipient is read as a single non-empty line of text,
formatted as follows:
address<tab>dsn<tab>orecipient
address is a non-empty recipient E-mail address, optionally followed by
the tab character, then zero or more characters specifying dsn, then a
tab character, then the orecipient value.
dsn is zero or more of the following characters: S - send a delivery
status notification upon a successful delivery to this address, F -
send a DSN upon a failed delivery, D - send a DSN upon a mail delay, N
- never send a DSN. orecipient is the "Original Recipient", as
specified in RFC1894, using xtext encoding.
submit will print a response to each recipient (see "RESPONSES FROM
SUBMIT", above). If at least one recipient address has been succesfully
specified, a blank line is read to specify end of recipient list, which
is followed by the entire message, headers and body.
A single blank line terminates the list of recipients. That is followed
by the message itself, until end of file.
The blank line can be present before even a the first recipient is
specified. If so, submit obtains the list of recipient from the
message´s headers.
submit reads the message headers and body until end-of-file. Then,
submit prints a response (see above), indicating whether or not the
message was accepted for delivery, and terminates.
ADDRESS REWRITING
Each recipient address (whether specified explicitly, or obtained from
the message headers), will be rewritten according to the rewriting
rules specified by the input module. Each address in the headers of the
message will also be rewritten.
After rewriting each recipient address, submit will search the
aliases.dat file for this address, to see if it represents a locally
defined alias. Submit searches
/usr/local/libexec/courier/modules/module/aliases.dat and
/usr/local/etc/courier/aliases.dat (actual locations may be changed by
the system administrator). If the address is found, the recipient
address will be replaced by the addresses defined in the aliases.dat
file.
ENVIRONMENT VARIABLESsubmit also reads the following environment variables to further
specify how the message is to be processed:
BLOCK
If this variable is set to a non-empty value, submit will reject
every recipient (in effect, rejecting the message). The contents of
the environment variable will be used as the error message.
BOFHBADMIME
Specifies how a message with illegal MIME headers is handled. The
possible values of this environment variable are: "wrap" (default)
- reformat the message as an attachment that must be handled
separately; "reject" - reject the message; "accept" - accept the
message.
DSNENVID
If envid is not specified, or is blank, and this environment
variable is defined, the contents of this variable is used as the
original envelope id field for DSNs. Note that DSNENVID is copied
verbatim into the Original-Envelope-Id field (if the message is
relayed to another MTA, the Courier mail server automatically
xtext-encodes it).
DSNNOTIFY
If the dsn field for a recipient is empty, the contents of this
environment variable is used in its place. Also, if the recipient
list is read from the headers, the contents of this environment
variable are used to set the dsn setting.
DSNRET
If the format field for this message is empty, the contents of this
environment variable is used in its place.
NOADDDATE
Normally the Courier mail server adds a Date: header to the
message, if it does not have one. If this environment variable is
set, the Courier mail server will not add a Date: header.
NOADDMSGID
Normally the Courier mail server adds a Message-Id: header to the
message, if it does not have it. If this environment variable is
set, the Courier mail server will not add a Message-Id: header.
MIME
Normally the Courier mail server adds any missing RFC2045 headers
to the message. The MIME environment variable can be set to the
following values: none - do not do any RFC2045 processing
whatsoever; 7bit - if the message contains any 8-bit text, convert
it to quoted-printable encoding; 8bit -if the message contains any
quoted-printable encoded text that can be representing as
8bit-encoded text, then convert it to 8bit encoding.
SEE ALSOcourierpop3d(8)[1], couriertcpd(8)[2], authlib(7)[3].
AUTHOR
Sam Varshavchik
Author
NOTES
1. courierpop3d(8)
[set $man.base.url.for.relative.links]/courierpop3d.html
2. couriertcpd(8)
[set $man.base.url.for.relative.links]/couriertcpd.html
3. authlib(7)
[set $man.base.url.for.relative.links]/authlib.html
Courier Mail Server 02/10/2011 SUBMIT(8)
